Application of a checklist for quality assistance in environmental modelling to an energy model

Large, complex energy models present considerable challenges to develop and test. Uncertainty assessments of such models provide only partial guidance on the quality of the results. We have developed a model quality assistance checklist to aid in this purpose. The model checklist provides diagnostic output in the form of a set of pitfalls for the model application. The checklist is applied here to an energy model for the problem of assessing energy use and greenhouse gas emissions. Use of the checklist suggests that results on this issue are contingent on a number of assumptions that are highly value-laden. When these assumptions are held fixed, the model is deemed capable of producing moderately robust results of relevance to climate policy over the longer term. Checklist responses also indicate that a number of details critical to policy choices or outcomes on this issue are not captured in the model, and model results should therefore be supplemented with alternative analyses.     

LIDAR Measurements of the Vertical Aerosol Profile and Optical Depth during the ACE-Asia 2001 IOP, at Gosan, Jeju Island, Korea

In order to investigate the characteristic of optical properties of Asian dust particles, the atmospheric aerosol vertical profile was measured with the multi-wavelength LIDAR system, at the Gosan super site (33 degrees 17'N, 126 degrees 10'E) in Jeju Island, Korea, during the ACE-Asia intensive observation period, 11 March-4 May 2001. An air mass backward trajectory analysis, using Hysplit-4, was carried out to track the aerosol plume, with high mass loading, from the Chinese desert regions during the period of Asian dust storm events. Vertical atmospheric aerosol profiles on three major Asian dust storm event days, 22 March and 13 and 26 April 2001, have been analyzed. The LIDAR-derived aerosol optical depth values were compared with those measured by a collocated sunphotometer.     

选择双波长分光光度法测定水中余氯

余氯在pH6.5条件下与PADA发生显色反应,本文根据稳定悬浮颗粒对光的吸收行为研究选择波长测定水体中余氯,实验证明在450～515nm波长范围内任意选择两波长比色按照推导公式和模型计算余氯浓度,测定方便结果准确,且计算模型稳定,几乎不受操作环境影响。适合于废水和天然水的监测。     

多介质环境目标值的应用

本文概述了多介质目标德的SAM/Ⅰ的方法。多介质目标值包括环境目标值和排放目标值。点源分析包括SAM/ⅠA,SAM/ⅠB,SAM/Ⅰ,SAM/Ⅱ。在缺少环境质量标准的情况下,使用多介质环境目标值有较强的适用性,且具有省时、省力、经济等特点。本文将多介质目标值的SAM/ⅠA点源分析方法引入聚氯乙烯生产废水的环境评价中,取得较为满意的结果。     

冰雪南极野性南极

这是一个晶莹剔透的冰雪世界，面积相当于15个澳洲，光是一个冰棚就等于法国，南极的冰帽更含纳了地表70%的淡水。它又是一个野性肆意挥洒的空间，庞大而奇特的极地生物体系顽强而充满生机，在冰雪的覆盖下，同时也冷藏着许多地球演化的秘密。     

高温嗜粪菌的选育和猪粪发酵研究

筛选得到了８株嗜高温（５５℃）嗜粪细菌，均具有较强的发酵猪粪能力。加入所选育菌株进行的猪粪高温（５５℃）固体好氧发酵实验发明，２４ｈ内可将猪粪发酵成无臭味、深褐色的稳定和无害化产物，常温下长时间放置也不会产生腐败和臭味。此发酵产物的氮试验法结果显示，猪粪已发酵至表观成熟和稳定化，可作为进一步制取优质有机复合肥料的良好前体物。     

杭州市大气NOx来源及控制对策研究

采用定常高斯模式和Thlong程序建立NOx污染源强与大气NOx浓度间定量响应数值模型,计算了点源、面源和流动源等各类污染源对杭州市区各关心点NOx的平均贡献率,分别约为17%,17%和66%,其中市区机动车尾气贡献率高达50%左右,是首先要控制的污染源.同时提出NOx排放削减方案及实施后大气NOx质量改善状况,为环保管理部门削减NOx污染源提出供决策参考.     

预应力锚索在公路边坡支护中的应用

随着高等级公路的出现及山区高速公路的大量建设,公路边坡问题日益突出,预应力锚索加固技术作为一项新兴技术,在公路边坡支护中有着广阔应用前景。本文根据国内外诸多的设计施工实践,综合论述了预应力锚索结构构造和原理、设计、施工原则和施工监测,应用效果和优越性,对有关理论、工艺问题进行了探讨,为进一步推广这些新技术提供了理论参考和实践经验。     

中国华北地区冬季大气污染物航空测量(Ⅰ)——空中气态污染物污染特征研究

为掌握致酸大气污染物ＳＯ２ 和ＮＯｘ 的空间浓度分布，并探讨上述污染物扩散、迁移和传输规律，进而研究其在酸性降水形成过程中的作用，在“八五”期间酸性降水的研究中，针对中国华北地区城市和工业集中以及ＳＯ２ 和ＮＯｘ 等酸性大气污染物排放量大的特点，以石家庄及其以东地区为飞行区域，进行了华北地区冬季空中ＳＯ２ 和ＮＯｘ 污染特征的航空测量。通过测定发现在华北地区１－５ ｋｍ 左右的空中存在着ＳＯ２ 和ＮＯｘ 高浓度污染空域，同时ＳＯ２ 存在着高浓度汇集区