Short-range transport of contaminants released from e-waste recycling site in South China

The transport behaviors of a suite of contaminants released from electronic waste (e-waste) recycling operations, including polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), and heavy metals, were evaluated by analyzing the contaminant residues in surface soils sampled in the surrounding area of an e-waste recycling site in South China. Concentrations of PBDEs and PCBs in the soil samples ranged from 0.565 to 2908 ng g(-1) dw and from 0.267 to 1891 ng g(-1) dw, respectively, while soil residues were 0.082-2.56, 3.22-287, and 16.3-162 μg g(-1) dw for Cd, Cu, and Pb, respectively. Concentrations of PBDEs and PCBs in soil decreased with increasing distance from the source of pollution, indicating possible PBDE and PCB contamination in the surrounding areas due to the short-range transport of these compounds from the e-waste recycling site. Although no significant difference in the short-range transport potential among PBDE and PCB congeners was observed, reductions in concentrations of the highly-brominated-BDEs and highly-chlorinated-CBs were slightly quicker than those of their less-halogen-substituted counterparts. Conversely, heavy metals showed the lowest transport potential due to their low vapor pressure, and results showed metals would remain near the pollution source instead of diffusing into the surrounding areas. Finally, mass inventories in areas near the e-waste site were 0.920, 0.134, 0.860, 4.68, 757, and 673 tons for BDE209, PBDEs (excluding BDE209), PCBs, Cd, Cu, and Pb, respectively.     

Fate estimation of polycyclic aromatic hydrocarbons in soils in a rapid urbanization region, Shenzhen of China

Our previous study indicated that the current level of polycyclic aromatic hydrocarbons (PAHs) in Shenzhen soil is in the low-end of world soil PAH pollution. In this study, the fate of PAHs in the soil of Shenzhen was investigated. The mass inventories of Σ(27)PAHs and Σ(15)PAHs (defined as the sum of the 27 or 15 PAH compounds sought) in topsoil of Shenzhen were ～204 and ～152 metric tons, respectively. Fate estimation of Σ(15)PAHs shows that air-soil gaseous exchange is the primary environmental process with ～10,076 kg/year diffusing from soil to air. Rain washing (～1131 kg/year from air to soil) is the most important input pathway followed by wet (～17 kg/year) and dry deposition (～8 kg/year) to soils in Shenzhen. The transport of Σ(15)PAHs by soil erosion is a crucial loss process for soil PAHs in Shenzhen (1918 kg/year for water runoff and 657 kg/year for solid runoff from soil). Moreover, degradation is not ignorable at present (95 kg/year). Comparison of inventory and residue (defined as Σ(15)PAHs left in topsoils after all environmental loss processes) suggested that input and loss of high molecular weight PAHs for Shenzhen's soil reached apparent equilibrium. Soil PAH pollution in Shenzhen will stay in a quasi-steady state for a long period and the natural environmental processes can not significantly reduce the pollution.     

A review of gas-phase chemical mechanisms commonly used in atmospheric chemistry modelling

The atmospheric chemical mechanism is an essential component of airshed models used for investigating the chemical behaviors and impacts of species. Since the first tropospheric chemical mechanism was proposed in the 1960s, various mechanisms including Master Chemical Mechanism (MCM), Carbon Bond Mechanism (CBM), Statewide Air Pollution Research Center (SAPRC) and Regional Atmospheric Chemistry Mechanism (RACM) have been developed for different research purposes. This work summarizes the development and applications of these mechanisms, introduces their compositions and lumping methods, and compares the ways the mechanisms treat radicals with box model simulations. CBM can reproduce urban pollution events with relatively low cost compared to SAPRC and RACM, whereas the chemical behaviors of radicals and the photochemical production of ozone are described in detail in RACM. The photolysis rates of some oxygenated compounds are low in SAPRC07, which may result in underestimation of radical levels. As an explicit chemical mechanism, MCM describes the chemical processes of primary pollutants and their oxidation products in detail. MCM can be used to investigate certain chemical processes; however, due to its large size, it is rarely used in regional model simulations. A box model case study showed that the chemical behavior of OH and HO₂ radicals and the production of ozone were well described by all mechanisms. CBM and SAPRC underestimated the radical levels for different chemical treatments, leading to low ozone production values in both cases. MCM and RACM are widely used in box model studies, while CBM and SAPRC are often selected in regional simulations.     

Acid Orange 7 degradation using methane as the sole carbon source and electron donor

• AO7 degradation was coupled with anaerobic methane oxidation. • Higher concentration of AO7 inhibited the degradation. • The maximum removal rate of AO7 reached 280 mg/(L·d) in HfMBR. • ANME-2d dominated the microbial community in both batch reactor and HfMBR. • ANME-2d alone or synergistic with the partner bacteria played a significant role. Azo dyes are widely applied in the textile industry but are not entirely consumed during the dyeing process and can thus be discharged to the environment in wastewater. However, azo dyes can be degraded using various electron donors, and in this paper, Acid Orange 7 (AO7) degradation performance is investigated using methane (CH₄) as the sole electron donor. Methane has multiple sources and is readily available and inexpensive. Experiments using ¹³C-labeled isotopes showed that AO7 degradation was coupled with anaerobic oxidation of methane (AOM) and, subsequently, affected by the initial concentrations of AO7. Higher concentrations of AO7 could inhibit the activity of microorganisms, which was confirmed by the long-term performance of AO7 degradation, with maximum removal rates of 8.94 mg/(L·d) in a batch reactor and 280 mg/(L·d) in a hollow fiber membrane bioreactor (HfMBR). High-throughput sequencing using 16S rRNA genes showed that Candidatus Methanoperedens, affiliated to ANME-2d, dominated the microbial community in the batch reactor and HfMBR. Additionally, the relative abundance of Proteobacteria bacteria (Phenylobacterium, Pseudomonas, and Geothermobacter) improved after AO7 degradation. This outcome suggested that ANME-2d alone, or acting synergistically with partner bacteria, played a key role in the process of AO7 degradation coupled with AOM.     

湖泊富营养化模型的研究进展

湖泊的富营养化是全球普遍关注的环境问题之一.湖泊的富营养化模型是防治、修复和治理湖泊富营养化的重要决策工具.按研究的侧重点不同,将湖泊富营养化模型分为简单回归模型、水质模型、生态模型和生态-水动力水质模型,并分别回顾了四类模型的研究进展.最后指出湖泊富营养化模型的发展趋势,强调不确定理论、3S技术、耦合模型是今后湖泊富营养化模型研究的重点,应在此基础上建立通用的模拟、预测、评价和优化模型,为湖泊富营养化管理提供科学依据.     

Development of Hybrid Film Based on Carboxymethyl Chitosan-Gum Arabic Incorporated Citric Acid and Polyphenols from Cinnamomum camphora Seeds for Active Food Packaging

Journal of Polymers and the Environment - In this study, carboxymethyl chitosan with gum Arabic (CG) based novel functional films containing Cinnamomum camphora seeds extract (CCSE) at varying...     

酸化大豆蛋白废水的厌氧处理

对有机质浓度高,成分单一,蛋白质、总氮浓度较高,易酸化,且已酸化程度较高的大豆蛋白废水,确定以新型内循环厌氧反应池为主的处理工艺,在原废水ρ(COD)为11809~15040mg/L时,总出水浓度192~350mg/L,去除率达到96.2%~97.5%。新的内循环厌氧反应池具有高度小、结构简单、污染物去除率高的特征,COD运行负荷达6.0~7.5kg/(m3.d),COD去除率达88%~93%。当COD运行负荷5.0~7.0kg/(m3.d)时,该池内循环管道形成了连续的较强内回流。     

Pollution havens and industrial agglomeration

This paper examines the pollution haven hypothesis using a spatial-economy model of two countries and two sectors. The manufacturing sector generates cross-border pollution which reduces cross-sectoral productivity of agricultural goods, and lowers local income. We derive a demand-reducing effect that discourages firms to move to the country with laxer environmental regulations, in the absence of any comparative advantage. Our analysis also demonstrates that manufacturing agglomeration forces can alleviate the pollution-haven effect: a pollution haven may not arise if environmental regulation is slightly more stringent in the larger country.     

粉煤灰对垃圾填埋场黄土垫层的改性试验

通过击实、渗透试验得到粉煤灰改性-黄土的最佳配比为10%。对压实黄土和压实粉煤灰改性-黄土,分别用清水和渗滤液进行室内渗透试验,结果表明:渗滤液在压实粉煤灰改性黄土中的渗透系数≤1.0×10-7cm/s,在压实黄土中的渗透系数≤1.0×10-5cm/s,前者可作为填埋场防渗垫层,后者可作为填埋场防渗保护垫层。对COD、NH3-N的去除效果前者优于后者。     

Life cycle assessment of TV sets in China: A case study of the impacts of CRT monitors

Along with the rapid increase in both production and use of TV sets in China, there is an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of these sets. This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese TV sets. An assessment of the TV set device (focusing on the Cathode Ray Tube (CRT) monitor) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software version 7.2 and expressed with the Eco-indicator' 99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the CML method was used in order to estimate the influence of the choice of the assessment method on the results. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations on the current Chinese situation. The established LCA study shows that the use stage of such devices has the highest environmental impact, followed by the manufacturing stage. In the manufacturing stage, the CRT and the Printed Circuit Board (PCB) are those components contributing the most environmental impacts. During the use phase, the environmental impacts are due entirely to the methods of electricity generation used to run them, since no other aspects were taken into account for this phase. The final processing step-the end-of-life stage-can lead to a clear environmental benefit when the TV sets are processed through the formal dismantling enterprises in China.