电镀污泥中铜和镍的回收

采用硫酸酸浸#x02014;铜镍分离#x02014;净化除杂#x02014;沉淀制取硫酸镍的工艺从电镀污泥中回收铜和镍,分别采用硫化钠沉淀法和铁粉置换法研究电镀污泥酸浸液中铜和镍的分离效果。实验结果表明,硫化钠沉淀法对铜和镍的分离效果较好,其最优工艺条件为：硫化钠加入量为理论需求量的1.2倍,硫化钠沉淀温度60℃,硫化钠沉淀时间30min。利用本回收工艺制得的硫酸镍产品中镍的质量分数为18%,镍的回收率达80%以上,铜的回收率达90%以上。     

磁性铁矿石对CO还原SO2的催化活性

采用磁性强弱不同的铁矿石以及制备的Fe3O4作为催化剂,催化CO还原SO2。实验结果表明:在3种催化剂中弱磁性铁矿石对CO还原SO2的催化活性最好;当反应温度为700℃时,在弱磁性铁矿石催化作用下的SO2转化率达84.3%。该方法既可以有效去除炼油厂催化裂化再生装置排放的SO2,同时又利用了低品位的磁性铁矿石,实现了SO2的治理和资源的综合利用。     

铈离子光催化降解茜素绿的性能和机理简

主要研究了简单铈离子（Ce³⁺）在紫外光（UV）的作用下对蒽醌染料茜素绿（AG）的光催化降解效果和反应机理。结果表明,UV/Ce³⁺体系能够有效降解AG,初始反应速率随AG浓度的倒数值和Ce³⁺浓度的增加而线性增加,随初始溶液pH的增加先降低后增加,在酸性条件下有很高的TOC去除率。荧光探针实验表明,反应过程中可以产生·OH自由基。UV/Ce³⁺体系对其他类型染料和对硝基苯酚都有较好的降解效果。     

基于响应面法的污泥快速固化效能综合影响简

针对现有污泥固化技术存在的固化养护时间长、低温条件下固化效能低等问题。研究提出污泥快速（3 d）固化技术,采用响应曲面分析方法,重点考察了石灰、组分A、硅酸盐水泥、粉煤灰和温度等5因素对固化效能的综合影响,研究结果表明,石灰、组分A、硅酸盐水泥、粉煤灰和养护温度等因素对3 d固化体的无侧限抗压强度和含水率的线性效应显著,石灰和组分A、石灰和养护温度对无侧限抗压强度的交互影响显著,石灰和粉煤灰、组分A和养护温度、硅酸盐水泥和粉煤灰对含水率的交互影响显著;得出了5因素对固化体3 d无侧限抗压强度和含水率影响的定量模型,可对污泥快速固化进行优化和预测;并利用XRD和SED对污泥固化块的化学成分和微观结构进行了分析。     

4种高级氧化法处理高浓度正丙醇废水的动力学比较

研究了1%和10%(V/V)模拟正丙醇废水在UV/TiO2体系、UV/H2O2体系、Fe2+/H2O2体系和UV/TiO2/Fe2+/H2O2体系等4种工艺条件下的降解动力学过程,对比了降解动力学特点及工艺参数对动力学常数的影响,优化工艺参数。结果表明,UV/TiO2体系和Fe2+/H2O2体系的降解过程可分为零级反应阶段和一级反应阶段,转折点分别在反应开始后2 h和氧化剂浓度为6.7 g/L,UV/H2O2体系和UV/TiO2/Fe2+/H2O2体系分别符合零级反应和一级反应规律;相同工艺参数条件下,6 h反应后,组合工艺UV/TiO2/Fe2+/H2O2体系在处理效率达85%,比前3个体系分别高52.0%、8.3%和32.0%,与UV/TiO2体系和Fe2+/H2O2体系的处理效率之和持平,其协同效应提高了速率常数,在目标物浓度降低时依然可维持较高降解速率。而目标物浓度提高10倍后,UV能量利用率提高35.5倍,氧化剂用量是Fe2+/H2O2体系的1/7.1。     

Influence of lead acetate on soil microbial biomass and community structure in two different soils with the growth of Chinese cabbage (Brassica chinensis)

A greenhouse pot experiment was conducted to evaluate the impact of different concentrations of lead acetate on soil microbial biomass and community structure during growth of Chinese cabbage (Brassica chinensis) in two different soils. The field soils were used for a small pot, short-term 60-day growth chamber study. The soils were amended with different Pb concentrations, ranging from 0 to 900mgkg(-1) soil. The experimental design was a 2 soilx2 vegetation/non-vegetationx6 treatments (Pb)x3 replicate factorial experiment. At 60 days the study was terminated and soils were analyzed for microbial parameters, namely, microbial biomass, basal respiration and PLFAs. The results indicated that the application of Pb at lower concentrations (100 and 300mgkg(-1)) as lead acetate resulted in a slight increase in soil microbial biomass, whereas Pb concentrations >500mgkg(-1) caused an immediate gradual significant decline in biomass. However, the degree of impact on soil microbial biomass and basal respiration by Pb was related to management (plant vegetation) or the contents of clay and organic matter in soils. The profiles of 21 phospholipid fatty acids (PLFAs) were used to assess whether observed changes in functional microbial parameters were accompanied by changes in the composition of the microbial communities after Pb application at 0, 300 and 900mg Pbkg(-1) soil. The results of principal component analyses (PCA) indicated that there were significant increases in fungi biomarkers of 18:3omega6c, 18:1omega9c and a decrease in cy17:0, which is an indicator of gram-negative bacteria for the high levels of Pb treatments In a word, soil microbial biomass and community structure, therefore, may be sensitive indicators reflecting environmental stress in soil-Pb-plant system. However, further studies will be needed to better understand how these changes in microbial community structure might actually impact soil microbial community function.     

Effect of condensed organic matter on solvent extraction and aqueous leaching of polycyclic aromatic hydrocarbons in soils and sediments

The contents of nonhydrolyzable organic matter (NHC) and black carbon (BC) were measured in soils and sediments from the Pearl River Delta, South China. Polycyclic aromatic hydrocarbons (PAHs) were extracted respectively by Soxhlet and an accelerated solvent extraction device (ASE) using different solvents. In addition, sequential aqueous leaching at different temperatures was carried out. The PAH content extracted with the sequential three solvent ASE is two times higher than that using the Soxhlet extraction method. The relationship of the PAH content with the NHC content is very significant. The PAH concentrations measured at various temperature steps fit well to the Van't Hoff equation and the enthalpy was estimated. The investigation indicates that condensed organic matter such as kerogen carbon, aged organic matter, and BC is relevant for the extraction and distribution of native PAHs in the investigated field soils and sediments.     

A fuzzy composting process model

Composting processes are normally complicated with a variety of uncertainties arising from incomplete or imprecise information obtained in real-world systems. Previously, there has been a lack of studies that focused on developing effective approaches to incorporate such uncertainties within composting process models. To fill this gap, a fuzzy composting process model (FCPM) for simulating composting process under uncertainty was developed. This model was mainly based on integration of a fractional fuzzy vertex method and a comprehensive composting model. Degrees of influence by projected uncertain factors were also examined. Two scenarios were investigated in applying the FCPM method. In the first scenario, model simulation under deterministic conditions was conducted. A pilot-scale experiment was provided for verifications. The result indicated that the proposed composting model could provide an excellent vehicle for demonstrating the complex interactions that occurred in the composting process. In the second scenario, application of the proposed FCPM was conducted under uncertainties. Six input parameters were considered to be of uncertain features that were reflected as fuzzy membership functions. The results indicated that the uncertainties projected in input parameters will result in significant derivations on system predictions; the proposed FCPM can generate satisfactory system outputs, with less computational efforts being required. Analyses on degree of influence of system inputs were also provided to describe the impacts of uncertainties on system responses. Thus, suitable measures can be adopted either to reduce system uncertainty by well-directed reduction of uncertainties of those high-influencing parameters or to reduce the computational requirement by neglecting those negligible factors.     

不同预处理对电镀污泥电动过程的影响

以风干电镀污泥为电动处理试验材料,水为阳极电解液,柠檬酸柠檬酸铵缓冲液为阴极电解液,施加25 V直流电压条件下电动运行5 d,研究了水、低浓度木钙和硝酸等预处理对电镀污泥电动过程的影响。结果表明,各处理的阴极电解液pH值变化平稳,都维持在3～3.5较理想的范围。而1％木钙、1％硝酸饱和预处理电镀污泥,明显改变了电动过程中电渗流和电流密度的大小,对电镀污泥Cu、Ni的去除率也有明显增加。其中,木钙、硝酸预处理后对Cu的去除率由对照的13.24％分别提高到19.05％和25.55％,即去除量分别增大3 516.35 mg/kg和7 457.62 mg/kg;木钙、硝酸预处理后对Ni的去除率由对照的14.68％分别提高到16.47％和28.85％,即去除量分别增大800.91 mg/kg和6 359.92 mg/kg。     

Experimental verification of a model describing solid phase microextraction (SPME) of freely dissolved organic pollutants in sediment porewater

To verify a theoretical mass balance and multiple compartment partitioning model developed to predict freely dissolved concentrations (FDCs) of hydrophobic organic chemicals (HOCs) using negligible depletion-solid phase microextraction (nd-SPME), a series of sediment slurry experiments were performed using disposable poly(dimethyl)siloxane (PDMS) coated-SPME fibers and (14)C-radiolabeled HOC analogs. First, pre-calibration of disposable PDMS coated fibers for four model compounds (phenanthrene, PCB 52, PCB 153 and p,p'-DDE) with good precision (PCB 52>PCB 153, and the measured and predicted C(pw) values were not substantially different from empirically determined values except for p,p'-DDE.