蓝藻定向发酵产丁酸的条件研究

以4种有机酸(乳酸、乙酸、丙酸、丁酸)对厌氧颗粒污泥进行胁迫处理,将胁迫后的污泥接种太湖蓝藻进行发酵产丁酸的实验,考察单一有机酸及混合有机酸胁迫对提高蓝藻厌氧发酵产丁酸的影响.结果表明,采用乳酸浓度2 g/L、乙酸浓度6 g/L、丙酸浓度5 g/L和丁酸浓度12 g/L的混合有机酸胁迫污泥后产丁酸效果最佳,获得的最大丁...     

Efficient removal and mechanisms of water soluble aromatic contaminants by a reduced-charge bentonite modified with benzyltrimethylammonium cation

A novel strategy utilizing the phenyls interaction and the hydrophobic affinity of available siloxane surface in the interlayer of bentonite was proposed to improve the sorption capabilities of organobentonites for water soluble aromatic contaminants. A unique organobentonite (65BTMA) was synthesized by intercalating benzyltrimethylammonium cation (BTMA⁺) into the interlayer of a reduced-charge bentonite with cation exchange capacity (CEC) of 65 cmol kg⁻¹. Phenol, aniline and toluene were used as model compounds of water soluble aromatic contaminants. Their respective removal efficiencies by 65BTMA were achieved at 83.3%, 89.2% and 97.3% at the initial concentration of 20 mg l⁻¹. To reveal the sorption mechanism, sorption characteristics of aromatic contaminants to 65BTMA were compared with that of aliphatic contaminants in similar molecular size. And various organobentonites were prepared by combining TMA⁺ (tetramethylammonium), BTMA⁺, HTMA⁺ (heptyltrimethylammonium) and CTMA⁺ (cetyltrimethylammonium) with two bentonites (CEC = 108 and 65 cmol kg⁻¹). To 65BTMA, sorption magnitudes of aromatic contaminants were much greater than that of aliphatic compounds with similar size; and dramatically higher than those to other organobentonites at low pollutant concentrations. These observations revealed that the strong phenyls interactions contributed significantly to sorb the aqueous soluble aromatic contaminants to 65BTMA (>90%), and which favored to design uniquely powerful sorbents.     

废弃印刷线路板非金属热解动力学

废弃印刷线路板非金属材料现有处理方式存在较大的环境风险,其热分解特性是对其进行安全处理处置及资源化再利用的关键所在。结合热重实验数据,分别运用Kissinger法、Flynn-Wall-Ozawa法及Freeman-Carroll法对动力学参数E、A、n进行了求解和讨论,结果表明,动力学参数E近似等于125.875 kJ/mol;A近似等于3.825×1010min-1;废弃印刷线路板非金属材料热解的动力学机理函数假设不宜表示为:f(α)=(1-α)n。运用atava-esták法对最概然机理函数进行了探讨,结果表明,废弃印刷线路板非金属材料的热分解动力学机理函数为:f(α)=[-ln(1-α)]4。研究结论为废弃印刷线路板非金属材料资源化再利用工业化设计与应用提供重要的实验数据和理论依据。     

不同存放时间太湖蓝藻产沼气潜力

对不同存放时间蓝藻(新鲜蓝藻、存放3个月、6个月和9个月)进行厌氧消化处置,分析反应过程中沼气量、代谢产物和酶活等变化,获得各自的产沼气潜力。研究结果表明,存放6个月蓝藻组的产沼气率最大,为120.5 mL/g TS,是新鲜蓝藻组的1.29倍。Gompertz模型拟合表明,随着存放时间的延长,最大产沼气量(Pmax)先增大后减小,最大比产气率一直增加。存放3个月蓝藻组的VFA在第6天达到最大,为1 575.4 mg/L,而存放9个月蓝藻组的VFA在第2天达到最大,为1 116.5 mg/L。存放3个月蓝藻组的最大中性蛋白酶酶活为1 203.4μg/(g TS.h),比新鲜蓝藻组提高212.8μg/(gTS.h)。脱氢酶酶活随着蓝藻存放时间的增加呈现先增加后减小的趋势。     

Mechanical Properties of Poly (Lactic Acid)/Hemp Fiber Composites Prepared with a Novel Method

This research dealt with a novel method of fabricating green composites with biodegradable poly (lactic acid) (PLA) and natural hemp fiber. The new preparation method was that hemp fibers were firstly blending-spun with a small amount of PLA fibers to form compound fiber pellets, and then the traditional twin-screw extruding and injection-molding method were applied for preparing the composites containing 10–40 wt% hemp fibers with PLA pellets and compound fiber pellets. This method was very effective to control the feeding and dispersing of fibers uniformly in the matrix thus much powerful for improving the mechanical properties. The tensile strength and modulus were improved by 39 and 92 %, respectively without a significant decrease in elongation at break, and the corresponding flexural strength and modulus of composites were also improved by 62 and 90 %, respectively, when the hemp fiber content was 40 wt%. The impact strength of composite with 20 wt% hemp fiber was improved nearly 68 % compared with the neat PLA. The application of the silane coupling agent promoted further the mechanical properties of composites attributed to the improvement of interaction between fiber and resin matrix.     

螺旋藻和菌-藻共生系统处理啤酒废水简

利用螺旋藻、由真菌和螺旋藻组成的菌-藻共生系统处理啤酒废水,旨在为啤酒废水的资源化利用提供一条可行的途径。由螺旋藻和真菌形成的菌丝球组成菌-藻共生系统处理啤酒废水,与螺旋藻单独处理废水作对比,比较两者的废水净化效果以及螺旋藻的生长情况。从2组实验对比情况来看,菌-藻共生系统对啤酒废水的处理效果更好。螺旋藻和菌-藻共生系统对啤酒废水中几种主要污染物的去除率分别为：COD 70.59%和77.81%,TN 70.17%和84.28%,TP 37.99%和50.88%。螺旋藻在废水中生长积累的蛋白质含量最高可达49.71%,明显高于在Zarrouk培养基中的螺旋藻蛋白含量（38.57%）。研究结果表明,螺旋藻及菌-藻共生系统对啤酒废水有较好的净化作用,所得螺旋藻生物质可用于加工饲料、饵料、色素的提取等。     

胞外多聚物在厌氧污泥颗粒化成核过程中的特性

以模拟啤酒废水为底物在IC反应器中进行厌氧污泥颗粒化培养,并对污泥颗粒化过程中胞外多聚物(EPS)的主要成分变化及其与细胞表面疏水性和Zeta电位之间的相互关系进行分析,以此来阐述EPS对污泥颗粒化成核的作用。研究结果表明,好氧剩余污泥在经过56 d的培养后,平均粒径由接种时的54.72μm增长到103.46μm,实现了厌氧污泥颗粒化成核过程;EPS蛋白质含量(PN)在颗粒化过程中逐渐由接种时的18.1 mg/g增至54.3 mg/g,而EPS多糖含量(PS)则无明显变化;此外,PN/PS与污泥平均粒径、细胞表面疏水性(RH)以及Zeta电位之间呈正相关关系,相关系数分别为0.9727、0.9593和0.9274。由此可推测:厌氧污泥颗粒化成核过程的主要作用成分为胞外蛋白质,其可以改变污泥细胞表面疏水性和Zeta电位,从而在厌氧污泥颗粒化过程中有着重要的促进作用。     

粉煤灰固定化絮凝剂填充床-鼓气工艺漂染污水处理研究

以粉煤灰固定化絮凝剂填充成絮凝过滤床 ,并组合成连续 -鼓气式五级絮凝过滤床污水处理系统。在吸附、絮凝、沉降、过滤和降解等协同作用下 ,污水流量为 2 5 L/h、鼓气量为 5 0 L/( L· h)、级数为 5时 ,处理水的悬浮物、色度、COD、氨氮、硫化物和苯胺的去除率分别为 99.0 %、91.8%、96.9%、95 %、96.9%、90 .6% ,p H=6.2～ 6.9,基本达到纺织染整工业污水 级排放标准     

Co-pyrolysis of sewage sludge and biomass for stabilizing heavy metals and reducing biochar toxicity: A review

The huge amounts of sewage sludge produced by municipal wastewater treatment plants induce major environmental and economical issues, calling for advanced disposal methods. Traditional methods for sewage sludge disposal increase greenhouse gas emissions and pollution. Moreover, biochar created from sewage sludge often cannot be used directly in soil applications due to elevated levels of heavy metals and other toxic compounds, which alter soil biota and earthworms. This has limited the application of sewage sludge-derived biochar as a fertilizer. Here, we review biomass and sewage sludge co-pyrolysis with a focus on the stabilization of heavy metals and toxicity reduction of the sludge-derived biochar. We observed that co-pyrolyzing sewage sludge with biomass materials reduced heavy metal concentrations and decreased the environmental risk of sludge-derived biochar by up to 93%. Biochar produced from sewage sludge and biomass co-pyrolysis could enhance the reproduction stimulation of soil biota by 20‒98%. Heavy metals immobilization and transformation are controlled by the co-feed material mixing ratio, pyrolysis temperature, and pyrolysis atmosphere.