聚丙烯酰胺在盐碱土壤中的吸附与迁移

采用静态吸附法研究了聚丙烯酰胺（PAM）在大庆市盐碱土中的吸附行为,并通过室内土柱实验研究了PAM在盐碱土中的自然迁移和模拟降雨情况下的迁移行为。实验结果表明,随吸附时间延长、液固比增大,PAM在盐碱土中的吸附量逐渐增大。PAM在盐碱土中的饱和吸附条件为液固比25,平衡吸附时间8h,在此条件下得出的PAM在盐碱土中的吸附等温线符合Langmuir等温吸附模型,饱和吸附量为0．81mg/g.PAM在盐碱土中的迁移规律为：沿地表随盐碱土深度增加,PAM的含量减少。PAM溶液淋滤量越大,迁移深度越深,各层土壤中PAM的含量也相应增加。降雨迫使PAM沿地表向下多迁移1cm,迁移深度在5—6cm。盐碱土对PAM的截留能力较强,意外泄漏的PAM主要集中在地表下3cm以内处,占总淋滤量的86．1％～99．9％。PAM在大庆市盐碱土中的迁移深度不超过10cm。     

自来水腥臭味原因及对策

自来水的水质关系到每个人的健康;而水厂供水的质量受水源的影响很大。文章分析了影响供水质量的因素及产生原因,并针对影响因素提出了相应的改善措施。     

印染废水脱色技术与理论述评

文章介绍了印染废水典型脱色技术的现状和进展,并着重分析了各种脱色技术的脱色机制,突出了典型脱色技术中的理论因素,介绍并阐明了一些脱色理论新观点,如吸附剂改性增效原理、分子结构与絮凝效果的联系、小剂量氧化剂偶合絮凝、脱色菌的质粒对脱色率的影响等,并从工艺角度分析了各种脱色方法的应用.     

复合生物反应器工艺对化纤废水的处理研究

在普通活性污泥系统的曝气池中投加一定量的填料构成复合生物反应器 ,可以增加曝气池中的生物体量至 6g/L左右 ,在HRT为 8h ,泥龄为 5d时 ,CODCr、氨氮的去除率分别提高了 2 0 %和9.6% ,容积负荷对复合生物反应器的脱氮能力影响较小。该工艺对污泥膨胀有较好的控制     

闽西北马尾松人工林营养元素的积累与分配格局

通过定位监测与取样分析,研究了41 a生马尾松人工林生态系统中的林木、林下植被、地被物及土壤等各组分营养元素含量、积累及分配特征.对林木的养分含量分析显示,除Ca元素外,针叶的养分含量最高,其次是枝、根、皮,树干的养分含量最低.林下植被层的养分含量比较高,其养分含量大小排列顺序为Ca＞N＞K＞Mg＞P;凋落物中各元素的含量与林木养分含量基本一致;土壤中K含量最高,其次是Mg,而Ca、N、P的含量则比较低.通过对林木生产力的分析表明,马尾松的养分年积累量为110.79 kg·hm-2·a-1,其中叶占34.47%,树干占22.56%,皮、枝和根分别占21.43%、10.91%和10.63%.马尾松林生态系统养分总贮量为187864.77 kg hm-2,其中土壤占98.70%,林木占1.18%,林下植被和凋落物养分元素总贮量较低,仅占总贮量的0.12%.     

Optimization of process parameters of extraction of lotaustralin from the roots of Rhodiola rosea L using supercritical CO2 plus modifier

Lotaustralin from the root of Rhodiola rosea L was extracted using supercritical carbon dioxide with methanol as modifier. Response surface methodology using Box–Behnken experimental design was utilized to explore parameters for supercritical carbon dioxide extraction. The effects of various values of temperatures (50–70 °C), pressures (200--400 bar), and percentages of methanol modifier (80%–100%) on the extraction yields of lotaustralin were evaluated. Extract identification was performed using high-performance liquid chromatography. The experimental data obtained were fitted to second-order polynomial equations and assessed using analysis of variance. The highest yields predicted from the experiments were 2.05 g kg^?1 lotaustralin at the optimal values, i.e. temperature 65 °C, pressure 316 bar, 88% methanol modifier at a flow rate of 0.4 mL min^?1, and dynamic extraction time 90 min.     

A new strain for recovering precious metals from waste printed circuit boards

A new strain, Pseudomonas Chlororaphis (PC), was found for dissolving gold, silver, and copper from the metallic particles of crushed waste printed circuit boards (PCBs). The optimized conditions that greatly improved the ability of producing CN^? (for dissolving metals) were obtained. Dissolving experiments of pure gold, silver, and copper showed that the metals could be changed into Au⁺, Ag⁺, and Cu²⁺. PC cells and their secreta would adsorb metallic ions. Meanwhile, metallic ions destroyed the growth of PC. Dissolving experiments of metallic particles from crushed waste PCBs were performed by PC. The results indicated that 8.2% of the gold, 12.1% silver, and 52.3% copper were dissolved into solution. This paper contributed significance information to recovering precious metals from waste PCBs by bioleaching.     

Identical full-scale biogas-lift reactors (BLRs) with anaerobic granular sludge and residual activated sludge for brewery wastewater treatment and kinetic modeling

Two identical full-scale biogas-lift reactors treating brewery wastewater were inoculated with different types of sludge to compare their operational conditions, sludge characteristics, and kinetic models at a mesophilic temperature. One reactor （R1） started up with anaerobic granular sludge in 12 weeks and obtained a continuously average organic loading rate （OLR） of 7.4 kg chemical oxygen demand （COD）/（m3.day）, COD removal efficiency of 80%, and effluent COD of 450 mg/L. The other reactor （R2） started up with residual activated sludge in 30 weeks and granulation accomplished when the reactor reached an average OLR of 8.3 kg COD/（m^3·day）, COD removal efficiency of 90%, and effluent COD of 240 mg/L. Differences in sludge characteristics,biogas compositions, and biogas- lift processes may be accounted for the superior efficiency of the treatment performance of R2 over R1. Grau second-order and modified StoverKincannon models based on influent and effluent concentrations as well as hydraulic retention time were successfully used to develop kinetic parameters of the experimental data with high correlation coefficients （R2 〉 0.95）, which further showed that R2 had higher treatment performance than R1. These results demonstrated that residual activated sludge could be used effectively instead of anaerobic granular sludge despite the need for a longer time.     

Flocculating characteristic of activated sludge flocs: Interaction between Al3+ and extracellular polymeric substances

Aluminum flocculant can enhance the flocculating performance of activated sludge.However,the binding mechanism of aluminum ion(Al 3+) and extracellular polymeric substances(EPS) in activated sludge is unclear due to the complexity of EPS.In this work,threedimensional excitation emission matrix fluorescence spectroscopy(3DEEM),fluorescence quenching titration and Fourier transform infrared spectroscopy(FT-IR) were used to explore the binding behavior and mechanism between Al 3+ and EPS.The results showed that two fluorescence peaks of tyrosineand tryptophan-like substances were identified in the loosely bound-extracellular polymeric substances(LB-EPS),and three peaks of tyrosine-,tryptophanand humic-like substances were identified in the tightly boundextracellular polymeric substances(TB-EPS).It was found that these fluorescence peaks could be quenched with Al 3+ at the dosage of 3.0 mg/L,which demonstrated that strong interactions took place between the EPS and Al 3+.The conditional stability constants for Al 3+ and EPS were determined by the Stern-Volmer equation.As to the binding mechanism,the-OH,N-H,C=O,C-N groups and the sulfurand phosphorus-containing groups showed complexation action,although the groups in the LB-EPS and TB-EPS showed different behavior.The TB-EPS have stronger binding ability to Al 3+ than the LB-EPS,and TB-EPS play an important role in the interaction with Al 3+.