公共场所人群加速度异常检测系统

针对目前基于速度检测公共场所密集人群异常行为存在的检测准确率低、使用范围局限的问题,从人群的加速度角度对可能导致公共安全事故的人群异常行为进行研究,提出了一种基于加速度检测人群异常行为的算法,并基于该算法实现了针对人群逃散、人群聚集、人群拥挤和人群逆行4种异常行为检测的系统。首先,利用金字塔Lucas-Kanade光流法进行特征点跟踪;然后,在获取到特征点的速度矩阵基础上进一步计算其加速度矩阵,反映速度的整体变化;最后,从加速度大小和方向两方面检测人群异常行为。结果表明,所提算法检测用时较少,相比基于速度检测的对比算法,检测的正确率提高到80%,误报率降低为5%。     

Optimized photocatalytic regeneration of adsorption-photocatalysis bifunctional composite saturated with Methyl Orange

Photo-responsive adsorption-photocatalysis nanocomposites are generally used in water and wastewater decontamination; however, the prolonged adsorption capacity of composites and the role of adsorption in concomitant photocatalysis are typically neglected. These composites can be regenerated under light irradiation as their adsorption capacity decreases. Herein, a novel adsorption-photocatalysis bifunctional nanocomposite, Bi-doped TiO₂ supported on powdered activated carbon (Bi₂O₃/TiO₂/PAC), was prepared using the sol-impregnation-hydrothermal procedure. Bi₂O₃/TiO₂/PAC with a secondary calcination temperature of 700°C under a nitrogen atmosphere was selected for maximum adsorption capacity on Methyl Orange (MO). The composite displayed an excellent adsorption capacity and was easily separated and recycled. The results demonstrate that 71.2% photocatalytic regeneration efficiency could be attained under visible light irradiation for 1 hr at an intensity of 750?W/m² and pH 7. Characterization of the as-prepared Bi₂O₃/TiO₂/PAC nanocomposite (700°C) indicates that it possesses a highly specific surface area and great optical properties, showing bifunctional adsorption-photocatalysis characteristics. The p-n heterojunction of the composite played a dominant role in the photocatalytic regeneration process, and effective degradation of MO could be achieved along with composite regeneration.     

紫外线对再生水中斜生栅藻的生长抑制效果

再生水具有就近易得、水量大且稳定等突出优点,已成为景观水体的重要补给水源。但再生水中含有氮、磷等营养物质,景观回用过程中可能会加剧藻类水华爆发风险。在藻类生长的早期阶段,采用紫外线处理有可能将再生水中藻类生物量控制在低风险范围,从而预防再生水景观回用水体中发生水华。以深圳市某污水处理厂二级出水为再生水回用景观水体的典型样品,考察了紫外线（254 nm波段）对典型微藻斜生栅藻的生长抑制效果,采用流式细胞术、调制荧光技术等方法,研究了不同紫外剂量对斜生栅藻的生长抑制效果,以及对藻细胞膜完整性和光合活性的影响。结果表明:对于初始密度约为7×104个/mL的斜生栅藻,50~100 mJ/cm2的紫外线能够取得1~5 d的生长抑制期,150~200 mJ/cm2剂量能将生长抑制期延长至10 d。紫外线能迅速引起斜生栅藻光合活性下降并能逐渐引起部分藻细胞破裂,100~200 mJ/cm2剂量处理后10 d内膜损伤细胞比例达到16%~71%。可见,紫外线能够对再生水中的斜生栅藻取得显著的生长抑制效果,是具有应用前景的景观水体水华风险防控手段。     

砷在昂曲沉积物中吸附解吸的影响因素研究

水环境条件的改变会影响沉积物对砷（As）的吸附解吸行为,进而影响砷在水环境中的迁移和转化.本实验以西藏昌都昂曲表层沉积物为研究对象,通过正交试验,考察pH、转速、溶解氧（DO）、Fe/Mn含量、沉积物/水比例、温度、粒径及As含量对沉积物吸附解吸As的影响.研究结果表明：①沉积物对砷的吸附量随着初始As含量、Fe/Mn含量和pH值的升高而增大,随着颗粒物浓度的升高而减小;不同粒径的沉积物对砷的吸附主要与沉积物中的有机质含量有关,粒径为63~250 μm的沉积物有机质含量最高（3.13 g·kg^-1）,平均吸附量最大（517.28 mg·kg^-1）.②不同粒径沉积物的解吸量与其砷含量和有机质含量有关,砷含量越高,有机质含量越少,砷的解吸量越大.砷的解吸量与转速和温度呈正相关,与pH、DO和颗粒物浓度呈负相关.③Langmuir模型对吸附等温线的拟合效果好于Freundlich模型,沉积物对砷的吸附存在明显的固体浓度效应.     

聚乙烯和页岩陶粒对污泥厌氧发酵产酸的影响

研究了两种廉价的常用填料聚乙烯（PE）和页岩陶粒（SC）对污泥厌氧发酵产酸的影响.结果表明,PE和SC的加入促进了污泥颗粒的分解和溶胞,总短链脂肪酸（TSCFAs）的浓度分别是对照组的1.2和1.1倍.PE和SC组挥发性固体（VS）的降解率（29.7%和29.1%）高于对照组（24.9%）,这是造成两组高SCFAs浓度维持较长时间的主要原因.高通量测序结果表明,PE和SC的加入使合成SCFAs的变形菌门（Proteobacteria）的相对丰度增加,而利用SCFAs的厚壁菌门（Firmicutes）和拟杆菌门（Bacteroidetes）的相对丰度则减少,说明合适的填料促进SCFAs产生的方式可能与产酸微生物种类的富集有关.     

Large variability in ambient ozone sensitivity across 19 ethylenediurea-treated Chinese cultivars of soybean is driven by total ascorbate

The sensitivity of Chinese soybean cultivars to ambient ozone(O3) in the field is unknown,although soybean is a major staple food in China. Using ethylenediurea(EDU) as an O3 protectant, we tested the gas exchange, pigments, antioxidants and biomass of 19 cultivars exposed to 28 ppm·hr AOT40(accumulated O3 over an hourly concentration threshold of40 ppb) over the growing season at a field site in China. By comparing the average biomass with and without EDU, we estimated the cultivar-specific sensitivity to O3 and ranked the cultivars from very tolerant( 10% change) to highly sensitive( 45% change), which helps in choosing the best-suited cultivars for local cultivation. Higher lipid peroxidation and activity of the ascorbate peroxidase enzyme were major responses to O3 damage, which eventually translated into lower biomass production. The constitutional level of total ascorbate in the leaves was the most important parameter explaining O3 sensitivity among these cultivars. Surprisingly, the role of stomatal conductance was insignificant. These results will guide future breeding efforts towards more O3-tolerant cultivars in China, while strategies for implementing control measures of regional O3 pollution are being implemented. Overall, these results suggest that present ambient O3 pollution is a serious concern for soybean in China, which highlights the urgent need for policy-making actions to protect this critical staple food.     

Remote estimation of cyanobacterial blooms using the risky grade index (RGI) and coverage area index (CAI): a case study in the Three Gorges Reservoir,China

Environmental Science and Pollution Research - Harmful cyanobacterial blooms are exemplified as a major environmental concern due to producing toxin, and have generated a serious threat to public...     

输油管道冻胀安全性温度场有限元分析

冻土区输油管道在投产运行过程中,由于管道沿线受到冻融影响引起的管线变形破坏现象比较普遍。已建的中俄原油管线由漠河进入中国,经过我国北方多年冻土区和季节冻土区直至大庆。输油管道在寒区运行过程中与周围土体发生了热交换,使原自然土层热交换体系改变,进而对运行的管线造成不利的影响如冻胀和融沉。本文对此进行研究为管道安全运行提供参考依据。     

A taxonomy of green supply chain management capability among electronics-related manufacturing firms in Taiwan

This study investigated crucial green supply chain management (GSCM) capability dimensions and firm performance based on electronics-related manufacturing firms in Taiwan. On the basis of a factor analysis, six green supply chain management dimensions were identified: green manufacturing and packaging, environmental participation, green marketing, green suppliers, green stock, and green eco-design. According to their factor scores in the GSCM dimensions, a cluster analysis subsequently assigned responding firms into four groups, namely, the weak GSCM oriented group, the green marketing oriented group, the green supplier oriented group, and the green stock oriented group. Differences in firm performance and GSCM dimensions among groups were examined. Results indicated that the green marketing oriented group performed best. Based on the resource-based view (RBV), the capability of the green marketing oriented group was considered to be the deployment of a collection of resources that enables it to successfully compete against rivals. The importance of green marketing as a GSCM capability and strategic asset/critical resources for electronics-related manufacturing firms to obtain a competitive edge is therefore highlighted in this study.     

Mitigation of energy intensity of an industrial off-gas cleaning system using process engineering solutions

In smelting processes, a large amount of off-gas emission is often generated, which can cause serious environmental and plant hygiene problems if not properly treated. Off-gas cleaning systems extract and treat the hazardous emissions, and ensure that the smelter operation is in accordance with environmental and industrial hygiene regulations. To this end, it is paramount that a well-designed control structure be incorporated into the system. In this work a plantwide control design procedure is applied to an industrial nickel smelter furnace off-gas cleaning system. We first approach the problem by conducting a steady-state analysis based on a nonlinear model of the process, where the objective is to determine how to achieve safe, clean and economic operation in terms of energy consumption. Results reveal that a large amount of energy can be saved by controlling the temperature in the furnace freeboard at its upper bound (active constraint). For the same reason, the temperatures in the two louvers (active constraints) should be controlled at their respective upper bounds so to minimize air intake into the system. The selection of the “unconstrained” variable to be controlled is found by applying the self-optimizing control technique, and the results indicate that a small loss is acceptable when one of the manipulated variables is fixed at its nominal optimal operating point, a highly desirable choice from an operational viewpoint. The bottleneck of the system is identified as the fans' discharge pressures when we allow the feed rate as a degree of freedom. Furthermore, a design change consisting of the installation of an auxiliary air intake in the smelter furnace shows to be a very effective economic alternative to minimize energy consumption. A control structure is then designed where the issue is to keep pressures in the system well within the negative region by determining the configuration of the regulatory and supervisory control layers such that acceptable dynamic performance in face of known, deterministic disturbance is achieved. Nonlinear dynamic simulations are performed to validate the suggested control structure for both modes of operation in the original system and in the proposed design change. The results showed that both regulatory and supervisory designs should make use of the simplicity of decentralized PI control schemes associated with some cascaded configurations so as to boost the disturbance rejection capabilities of the system.