Treatment of Basic Red 29 dye solution using iron-aluminum electrode pairs by electrocoagulation and electro-Fenton methods

The aim of this study is the treatment of Basic Red 29 (BR29) dye solution using hybrid iron-aluminum electrodes by electrocoagulation and electro-Fenton methods. The effect of current density, initial pH, supporting electrolyte, H₂O₂, and initial dye concentration on dye removal efficiency was investigated, and the best experimental conditions were obtained. Time-coarse variation of UV-Vis spectra and toxicity and chemical oxygen demand (COD) removal were also examined at the best experimental conditions. Both systems were found very successful for the removal of BR29 dye. The removal efficiency of >95 % for BR29 dye solution was reached easily in a short time. At the best experimental conditions, for the initial BR29 concentration of 100 mg/L, >95 % BR29 dye and 71.43 % COD removal were obtained after 20 and 40 min of electrolysis, respectively. Additionally, toxicity results for electro-Fenton treatment of 100 mg/L BR29 were also very promising. According to the results obtained, although electro-Fenton is more effective, both systems can be used successfully to treat textile wastewater including dyes.     

Laboratory waste minimization by recovery of silver as nano-silver colloidal dispersion from waste silver chloride

The use of cyclic experiments, where the product of one reaction becomes the starting material for the next experiment, was proposed as an effective protocol for waste minimization in an educational lab. A simple, cheap and pollution-free method was developed for recovering silver as nano-silver colloidal dispersion from waste silver chloride in the laboratories of the Faculty of Health, Safety and Environment. Silver nanoparticles of the size 5–18 nm were recovered in the presence of sodium borohydride as a reducing agent and polyvinylpyrrolidone as a stabilizer agent. The nano-silver particles were studied for their formation, structure, stability and size using UV–Vis spectroscopy, transmission electron microscopy and dynamic light scattering techniques. The antibacterial assays of nanoparticles showed satisfactory results for Escherichia coli ATCC25922, Staphylococcus aureus ATCC 29213, and Acinetobacter baumanii (Clinical isolate). A laboratory experiment was designed in which students synthesize yellow colloidal silver solution from chemical waste silver chloride and estimate particle size using visible spectroscopy.     

PREDICTING EROSION AND DEPOSITION ON A STRIPMINED AND RECLAIMED AREA1

ABSTRACT A rill-interrill erosion model was applied to a mined and reclaimed area. Soil loss from the interrill areas was estimated by the Universal Soil Loss Equation (USLE). The model considers the fate and ultimate disposition of the sediment from interrill areas along with the fate and destination of soil materials detached by the rill flow. The net sediment loss was predicted by comparing, for a given flow, the amounts of eroded soil to rill transport capacity. When applied to a selected stripmined and reclaimed site the model displayed the location of contributing areas and the amount of erosion and deposition. The predicted areal distribution of erosion and deposition was compared to measured data. Agreement between the predicted and measured values was within 25 percent.     

PEAKING STORAGE TANKS FOR WATER SUPPLY SYSTEMS1

ABSTRACT: Construction of a “peaking storage tank” may reduce the operational cost of municipal water in the availability of a time-of-use energy rate. A peaking storage tank is used for storing water that is pumped from wells or other sources of supply during off-peak periods when energy costs are less for use during periods of on-peak water demand. The optimal size of a peaking storage tank is that which results in the minimum total cost, which includes both the storage construction cost and the cost of operation of the pumps. The operational cost for a given time-of-use rate is determined by help of a pipe network simulation model solved by the Newton-Raphson technique and a dynamic programming optimization model. A more simplified method is also introduced. Analyses show that low off-peak energy costs make the construction of peaking storage tanks economically attractive and reduce on-peak energy use, which results in electrical load leveling.     

Estimating and mapping forest biomass using regression models and Spot-6 images (case study: Hyrcanian forests of north of Iran)

Hyrcanian forests of North of Iran are of great importance in terms of various economic and environmental aspects. In this study, Spot-6 satellite images and regression models were applied to estimate above-ground biomass in these forests. This research was carried out in six compartments in three climatic (semi-arid to humid) types and two altitude classes. In the first step, ground sampling methods at the compartment level were used to estimate aboveground biomass (Mg/ha). Then, by reviewing the results of other studies, the most appropriate vegetation indices were selected. In this study, three indices of NDVI, RVI, and TVI were calculated. We investigated the relationship between the vegetation indices and aboveground biomass measured at sample-plot level. Based on the results, the relationship between aboveground biomass values and vegetation indices was a linear regression with the highest level of significance for NDVI in all compartments. Since at the compartment level the correlation coefficient between NDVI and aboveground biomass was the highest, NDVI was used for mapping aboveground biomass. According to the results of this study, biomass values were highly different in various climatic and altitudinal classes with the highest biomass value observed in humid climate and high-altitude class.     

Physiological characteristics of <Emphasis Type="Italic">Plantago major</Emphasis> under SO<Subscript>2</Subscript> exposure as affected by foliar iron spray

Sulfur dioxide (SO₂) is considered as a main air pollutant in industrialized areas that can damage vegetation. In the present study, we investigated how exposure to SO₂ and foliar application of iron (Fe) would affect certain physiological characteristics of Plantago major. The plant seedlings exposed or unexposed to SO₂ (3900 μg m^?3) were non-supplemented or supplemented with Fe (3 g L^?1) as foliar spray. Plants were exposed to SO₂ for 6 weeks in 100 × 70 × 70 cm chambers. Fumigation of plants with SO₂ was performed for 3 h daily for 3 days per week (alternate day). Lower leaf Fe concentration in the plants exposed to SO₂ at no added Fe treatment was accompanied with incidence of chlorosis symptoms and reduced chlorophyll concentration. No visible chlorotic symptoms were observed on the SO₂-exposed plants supplied with Fe that accumulated higher Fe in their leaves. Both at with and without added Fe treatments, catalase (CAT) and peroxidase (POD) activity was higher in the plants fumigated with SO₂ in comparison with those non-fumigated with SO₂. Foliar application of Fe was also effective in increasing activity of antioxidant enzymes CAT and POD. Exposure to SO₂ led to reduced cellulose but enhanced lignin content of plant leaf cell wall. The results obtained showed that foliar application of Fe was effective in reducing the effects of exposure to SO₂ on cell wall composition. In contrast to SO₂, application of Fe increased cellulose while decreased lignin content of the leaf cell wall. This might be due to reduced oxidative stress induced by SO₂ in plants supplied with Fe compared with those unsupplied with Fe.     

Critical reflections on the theory and practice of social sustainability in the built environment – a meta-analysis

This article presents a critical reflection on the theory and practice of social sustainability in the built environment, identifies areas of agreement and disagreement, explores theoretical and conceptual gaps and challenges, and suggests practical implications for future research and urban policy. It argues that despite revisionist approaches which challenge the tripartite structure of sustainable development, social dimension of sustainability remains an essential valid pillar. Utilising a qualitative meta-analysis methodology for undertaking critical analysis of previous research and publications on the topic, key themes of theory and practice of social sustainability are identified and critically examined. Accordingly, 10 key formative characteristics of social sustainability and their research and policy implications are introduced. The article concludes with institutional observations for policy-makers to achieve greater success in addressing largely underestimated dimensions of social sustainability in urban settings.     

Drivers of local people’s participation in sustainable natural resource management: a case study in central Iran

The driving forces behind natural resource management (NRM) vary among countries. Most NRM programmes focus on biophysical drivers such as soil, water and vegetation, with little attention directed towards the nuanced sociocultural and religious drivers of sustainable natural resource management (SNRM) practices. This paper explores those understudied drivers that influence local people’s participation (LPP) in SNRM in Isfahan, Iran. Using a multi-stage stratified sampling method, we selected 200 natural resource experts and natural resource users to complete a questionnaire about their perceptions of SNRM. Results reveal that sociocultural and religious beliefs are the major drivers of SNRM. The results also indicate that subsidiary drivers include: a sense of responsibility towards SNRM; the conviction that natural resources belong to God and should therefore be preserved; participation to preserve natural resources because of training courses and media influence; a long-established custom of preserving natural resources; and the specific impact of environmental television programmes. Demographic analysis finds a significant relationship between educational level and LPP in SNRM. This study’s results therefore suggest that natural resource managers would benefit from a deeper understanding of the local sociocultural and religious contexts that motivate people to participate in SNRM.     

Wind energy and natural ventilation potential of a wind catcher in Yazd – Iran (a long-term measurement)

When designing energy efficient buildings it is useful to study existing climate—responsive building typologies. The wind towers or wind-catchers of Yazd city in Iran are typical examples of such a typology. Although many previous studies have investigated the performance of various types of wind catcher systems, studies based on a long-term real-life measurement can be rarely found. In this study a long-term whole year monitoring campaign on an existing full scale four sided wind catcher in Yazd was carried out in 2014–2015. Three prevailing wind directions were identified and the measured on-site wind speeds were used to estimate the wind induced natural ventilation potential of the tower. A shaft/tower airflow performance index was developed. The monitoring results were compared to the ASHRAE Standard 62:2001 ventilation rate requirement. Results show that the total ventilation rate of the wind tower surpasses the ASHRAE Standard requirements. Furthermore it shows that the shafts are exposed to the prevailing wind directions perform better. For more effective natural ventilation a wind tower with adaptable openings/shafts are proposed.