Insights to false positive total cyanide measurements in wastewater plant effluents.

Many publicly owned treatment works in North America are exceeding permitted limits for total cyanide in their wastewater treatment effluents. A recently introduced rapid, segmented, flow-injection analysis procedure using UV digestion and amperometric detection of the membrane-separated cyanide was used to investigate the various scenarios by which elevated cyanide levels might be present in wastewater treatment plant effluent. A number of significant interferences can produce false positive bias during sample analysis with the traditional acid distillation technique, but are minimized or absent with the new analytical method. However, increased levels of cyanide were found in some chlorinated wastewaters compared to the levels before chlorination, suggesting a fast reaction mechanism associated with the disinfectant and some precursor in the wastewater. In particular, the contact of chlorine with nitrite in the presence of a carbon precursor appears to contribute to cyanide formation during wastewater treatment and sample handling. This paper explores the scenarios under which cyanide can form during wastewater treatment as well as those in which a false bias for total cyanide can be obtained during sample processing and provides guidance for appropriate sample handling, screening, and processing to ensure valid analytical results.     

Derivation of transfer parameters for use within the ERICA Tool and the default concentration ratios for terrestrial biota

An ability to predict radionuclide activity concentrations in biota is a requirement of any method assessing the exposure of biota to ionising radiation. Within the ERICA Tool fresh weight whole-body activity concentrations in organisms are estimated using concentration ratios (the ratio of the activity concentration in the organism to the activity concentration in an environmental media). This paper describes the methodology used to derive the default terrestrial ecosystem concentration ratio database available within the ERICA Tool and provides details of the provenance of each value for terrestrial reference organisms. As the ERICA Tool considers 13 terrestrial reference organisms and the radioisotopes of 31 elements, a total of 403 concentration ratios were required for terrestrial reference organisms. Of these, 129 could be derived from literature review. The approaches taken for selecting the remaining values are described. These included, for example, assuming values for similar reference organisms and/or biogeochemically similar elements, and various simple modelling approaches.     

Concorde Emissions at Dulles International Airport: Results of Measurements

Hamilton, Ontario is an industrial city with a population of 300,000 which is situated at the western end of Lake Ontario. Canada’s two largest iron and steel mills are located here; the city historically has had relatively poor air quality, which has improved markedly in the last 25 years. Concern about the health effects of current air quality recently led us to carry out an epidemiological study of the effects of air pollution on the respiratory health of over 3500 school children. Respiratory health was measured by pulmonary function testing of each child, and by an assessment of each child’s respiratory symptoms via a questionnaire administered to the parents. Previous studies had shown that other environmental factors (e.g. parental smoking, parental cough, socioeconomic level, housing, and gas cooking) might also affect respiratory health, and thus “confound” any potential relationships between health and air pollution. The questionnaire also collected information on many of these confounding factors. For the purposes of initial analysis, the city was divided Into five areas in which differences In air quality were expected. In general, factors which have been associated with poor respiratory health were observed to be more prevalent in areas of poorer air quality.     

Ammonia modeling for assessing potential toxicity to fish species in the Rio Grande, 1989-2002.

Increasing volumes of treated and untreated human sewage discharged into rivers around the world are likely to be leading to high aquatic concentrations of toxic, unionized ammonia (NH3), with negative impacts on species and ecosystems. Tools and approaches are needed for assessing the dynamics of NH3. This paper describes a modeling approach for first-order assessment of potential NH3 toxicity in urban rivers. In this study daily dissolved NH3 concentrations in the Rio Grande of central New Mexico, USA, at the city of Albuquerque's treated sewage outfall were modeled for 1989-2002. Data for ammonium (NH4+) concentrations in the sewage and data for discharge, temperature, and pH for both sewage effluent and the river were used. We used State of New Mexico acute and chronic NH3- N concentration values (0.30 and 0.05 mg/L NH3-N, respectively) and other reported standards as benchmarks for determining NH3 toxicity in the river and for assessing potential impact on population dynamics for fish species. A critical species of concern is the Rio Grande silvery minnow (Hybognathus amarus), an endangered species in the river near Albuquerque. Results show that NH3 concentrations matched or exceeded acute levels 13%, 3%, and 4% of the time in 1989, 1991, and 1992, respectively. Modeled NH3 concentrations matched or exceeded chronic values 97%, 74%, 78%, and 11% of the time in 1989, 1991, 1992, and 1997, respectively. Exceedences ranged from 0% to 1% in later years after enhancements to the wastewater treatment plant. Modeled NH3 concentrations may differ from actual concentrations because of NH3 and NH4+ loss terms and additive terms such as mixing processes, volatilization, nitrification, sorbtion, and NH4+ uptake. We conclude that NH3 toxicity must be considered seriously for its potential ecological impacts on the Rio Grande and as a mechanism contributing to the decline of the Rio Grande fish community in general and the Rio Grande silvery minnow specifically. Conclusions drawn for the Rio Grande suggest that NH3 concentrations may be high in rivers around the world where alkaline pH values are prevalent and sewage treatment capabilities are poorly developed or absent.     

Estimating Fugitive Emissions of Volatile Compounds from Equipment Leaks

This paper is directed to those concerned with estimating releases to the air of volatile compounds from equipment component leaks. We compared emission rates for equipment component leaks using EPA’s Average Emission Factor Method, Leak/No-Leak Emission Factor Method, and Stratified Emission Factor Method. The latter two methods may be used if there are concentration measurements about the components. An organic vapor analyzer was applied with the appropriate response factor to measure the concentrations around each equipment component using EPA Method 21. We analyzed this data to determine mass emission rates. Results show that the Average Emission Factor Method substantially overstates the emission rates calculated using these other two methods. We conclude that use of Method 21 concentration measurements with the Leak/No Leak or Stratified Emission Factor Method may increase the accuracy and reduce significantly the estimated releases to the air of volatile compounds from equipment component leaks for many facilities.     

Evaluation of alternative landfill cover soils for attenuating hydrogen sulfide from construction and demolition (C&D) debris landfills

Hydrogen sulfide (H(2)S) generated from C&D debris landfills has emerged as a major environmental concern due to odor problems and possible health impacts to landfill employees and surrounding residents. Research was performed to evaluate the performance of various cover materials as control measures for H(2)S emissions from C&D debris landfills. Twelve laboratory-scale simulated landfill columns containing gypsum drywall were operated under anaerobic conditions to promote H(2)S production. Five different cover materials were placed on top of the waste inside duplicate columns: (1) sandy soil, (2) sandy soil amended with lime, (3) clayey soil, (4) fine concrete (particle size less than 2.5 cm), and (5) coarse concrete (particle size greater than 2.5 cm). No cover was placed on two of the columns, which were used as controls. H(2)S concentrations measured from the middle of the waste layer ranged from 50,000 to 150,000 ppm. The different cover materials demonstrated varying H(2)S removal efficiencies. The sandy soil amended with lime and the fine concrete were the most effective for the control of H(2)S emissions. Both materials exhibited reduction efficiencies greater than 99%. The clayey and sandy soils exhibited lower reduction efficiencies, with average removal efficiencies of 65% and 30%, respectively. The coarse concrete was found to be the least efficient material as a result of its large particle size.