Stormwater Control Measures for Runoff and Water Quality Management in Urban Landscapes

This study develops and tests a novel optimization method for optimally selecting and sizing stormwater control measures (SCMs) in urban landscapes for selected design storms. The developed methodology yields SCMs that capture and retain stormwater via onsite percolation, remove stormwater pollutants, and minimize stormwater control expenditures. The resulting environmental optimization problem involves integer and real variables imbedded in an objective function that is subjected to multiple constraints. This study's methodology aims at practicality and ease of implementation in the solution of the SCM sizing and selection optimization problem while taking into account the main factors that govern stormwater management in urban landscapes. The near‐optimal global solution of the SCM selection and design problem is obtained with nonlinear programming and verified with the average of multiple solutions calculated with multiple runs of an optimization evolutionary algorithm. The developed methodology is illustrated with one stormwater project in the City of Los Angeles, California.     

Dietary habits associated with the presence of organochlorine pesticides in human milk

Abstract

This study aims to establish the relationship between the consumption of certain foods and the presence of organochlorine pesticides in human milk. A total of 167 samples of breastmilk were collected. Sample analysis was carried out by gas chromatography with electron capture detector. Pesticide concentrations (op’DDT, pp’DDT, pp’DDE, Σ-DDT, HCB, β-HCH) were grouped by consumption level of fish, dairy products, meat, eggs, and seafood and then were compared to each other. The odds ratio (OR) was calculated between the concentration of pesticides (higher and/or lower than median) and the exposure variable (high consumption). The results indicated low median concentrations of HCB, β???HCH, op’DDT and pp’DDT, whose fluctuations and trends between different frequencies of food consumption were not significant. pp’DDE and Σ???DDT values according to the increase in consumption of fish were significantly increased. Women with high fish consumption have a higher risk of high concentrations of pp’DDE and Σ-DDT (OR: high consumption: 5.6 (1.3–23.6). A protective effect was observed in the consumption of dairy products (β-HCH and op’DDT), meat (HCB), and seafood (pp’DDT). These results suggest that it is possible that the consumption of fish, dairy products, meat, and seafood influences the presence of organochlorine pesticides in the studied population.     

TNT particle size distributions from detonated 155-mm howitzer rounds

To achieve sustainable range management and avoid or minimize environmental contamination, the Army needs to know the amount of explosives deposited on ranges from different munitions and how these are degraded and transported under different geological and climatic conditions. The physical form of the deposited explosives has a bearing on this problem, yet the shapes and size distributions of the explosive particles remaining after detonations are not known. We collected residues from 8 high-order and 6 low-order non-tactical detonations of TNT-filled 155-mm rounds. We found significant variation in the amount of TNT scattered from the high-order detonations, ranging from 0.00001 to 2% of the TNT in the original shell. All low-order detonations scattered percent-level amounts of TNT. We imaged thousands of TNT particles and determined the size, mass and surface-area distributions of particles collected from one high-order and one low-order detonation. For the high-order detonation, particles smaller than 1 mm contribute most of the mass and surface area of the TNT scattered. For the low-order detonation, most of the scattered TNT mass was in the form of un-heated, centimeter-sized pieces whereas most of the surface area was again from particles smaller than 1 mm. We also observed that the large pieces of TNT disintegrate readily, giving rise to many smaller particles that can quickly dissolve. We suggest picking up the large pieces of TNT before they disintegrate to become point sources of contamination.     

Extractable copper, arsenic and antimony by EDTA solution from agricultural Chilean soils and its transfer to alfalfa plants (Medicago sativa L.)

Following our research on copper, arsenic and antimony in Chilean ecosystems, a study to understand the mobility and transport of these elements from soil to plants was carried out. So, the aim of this study, which follows on from the previous work, was to demonstrate if the total concentrations of these elements or their fractions extracted by 0.05 M EDTA pH 7 from different Chilean soils correlate with the respective total concentrations in the edible tissue of alfalfa plants collected simultaneously from 20 different sites affected or unaffected by mining activities. The highest copper fractions extracted by EDTA solutions were obtained in contaminated soils from the central region (41-69%); however the northern soils presented the highest extractable fractions of arsenic (9-34%). The antimony fraction was low in all soils (0.4-8.0%). Alfalfa plants from all contaminated sites presented high copper, arsenic and antimony concentrations (19-126 mg kg(-1), 5.7-16.3 mg kg(-1) and 0.16-1.7 mg kg(-1), respectively). Statistically significant correlations were obtained between the total contents of copper and arsenic and their respective extractable fractions in soils. Good correlations were found between elements in alfalfa plants. Correlations were also obtained between the total concentrations of three elements in soils and in alfalfa plants. However, excepting for antimony in the northern samples, higher correlation coefficients were evaluated when the extractable fractions were considered. Samples from the north region presented the highest copper transfer factor and the lowest for arsenic, in spite of the high concentration of this metalloid extracted by EDTA solution in these soils. There was not a clear trend on the transfer factor for antimony, probably due to the low content of this element in alfalfa plants and/or the low recovery obtained for this element by EDTA.     

PM source identification at Sunland Park, New Mexico, using a simple heuristic meteorological and chemical analysis

The causes for evening low-wind PM10 and PM2.5 peaks at Sunland Park, NM, were investigated by using wind sector analysis and by assessing relationships between PM loadings and meteorological parameters through canonical ordination analysis. Both PM10 and PM2.5 concentrations during the evening hours accounted for approximately 50% of their respective 24-hr averages, and the PM10 was mainly composed of coarse material (PM10-2.5 amounted to 77% of PM10). A wind sector analysis based on data from three surface meteorological monitoring stations in the region narrowed the potential source region for PM10 and PM2.5 to an area within a few kilometers south of Sunland Park. Canonical ordination analysis confirmed that the peak frequently occurred under stable conditions with weak southerly winds. Chemical analyses of PM showed that elemental and organic carbon (EC and OC, respectively) dominate PM2.5 and inorganic elements dominate PM10-2.5. The combined data for EC/OC, geologic elements, and various trace elements indicate that under low wind and stable conditions, traffic-related PM emissions (motor vehicle exhausts and re-suspended road dust) from the south of the site are the most likely sources for the evening PM10 and PM2.5 peaks.     

Molecular Detection of Adenoviruses in Lakes and Rivers of Goiânia,Goiás,Brazil

Adenoviruses are a highly important public health issue, since they are among the most persistent and ubiquitous viruses present in water and associated with a variety of clinical manifestations. The aim of this study was to use molecular techniques for the detection of adenovirus in public and recreational water supplies in Goiania, Brazil. From December 2007 to November 2008, 54 water samples were collected in 5 different sites in 2 lakes and 2 rivers of the city. The samples were filtered in a positively charged nylon membrane, and the DNA was extracted using the phenol–chloroform–isoamyl alcohol method. Semi-nested PCR was used to detect adenovirus DNA, and sequence analysis of the semi-nested PCR products was performed to identify the recovered viruses. Adenovirus DNA was detected in 43% (24 of 54) of samples collected. Considering all examined sites, MP1 presented the highest occurrence of adenovirus (6 positive from 10 collected samples), followed by MP2 (3 positive from 6 collected samples), JL (10 positive from 21 collected samples), VB (3 positive from 9 collected samples), and BB (2 positive from 8 collected samples), respectively. The methodology employed proved to be feasible, fast, low-cost, and suitable to be used as screening approach on adenovirus detection in water for public sanitation companies.     

FLOOD DAMAGES IN CHANGING FLOOD PLAINS: A FORENSIC‐HYDROLOGIC CASE STUDY1

ABSTRACT: Hydraulic modification of flood plains by human activity is the primary cause of rising flood damages throughout the world. As flood‐plain hydraulic roughness increases, so does the water level for a fixed flow rate. This raises the flood damage associated with a flood of given return period, and thus, magnifies the flood risk. This article presents an approach that integrates climatic, hydrologic, and hydraulic principles and presents models to discern the probable causes of flood damage in a basin that undergoes flood‐plain development. The article documents key factors that govern flood damage and presents a case study that illustrates the principles of forensic hydrology in an impacted flood plain. The study demonstrates flood level rise caused by hydraulic alteration of a flood plain between 1969 and 1995 and apportioned the increased water level among agricultural and structural factors located in the study area.