Removal of high concentrated ammonia nitrogen from landfill leachate by landfilled waste layer

The landfill of municipal solid waste(MSW) could be regarded as denitrification reactor and involved in ammonia nitrogen biological removal process. In this research, the process was applied to municipal solid waste collected in Shanghai, China, which was characterized by high food waste content. The NH4^ removal efficiency in the system of SBR nitrifying reactor followed by fresh and matured landfilled waste layer in series was studied. In the nitrifying reactor, above 90% of NH4^ in leachate was oxidized to NO2^- and NO3^- . Then high concentrated NO2^- and NO3^- were removed in the way of denitrification process in fresh landfilled waste layer. At the same time, degradation of fresh landfilled waste was accelerated. Up to the day 120, 136.5 gC/(kg dry waste) and 17.9 gN/(kg dry waste) were converted from waste layer. It accounted for 50.15 % and 86.89 % of the total carbon and nitrogen content of preliminary fresh waste, which was 4.42 times and 5.17 times higher than that of reference column respectively. After filtering through matured landfilled waste, BOD5 concentration in leachate dropped to below 100 mg/L, which would not affect following nitrification adversely. Because the matured landfilled waste acted as a well methanogenic reactor, 23% of carbon produced accumulatively from fresh landfilled waste degradation was converted into CH4.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

我国与国外民间直升机救援的比较研究

本文通过对国外和我国民间直升机的救援现状进行分析,从救援装备、专业人才、基础设施、政策法规、运营模式等方面做了对比研究,发现我国在各方面都存在较大差距,提出了构建我国民间直升机救援体系的具体措施。     

浅谈"我要安全"应从预防事故做起

“我要安全”主题活动已在中国石化开展了近2年,做了大量工作,取得了显著的效果,但是“三违”现象仍时有发生,在2009年发生的人身伤害、火灾事故中有90％是“三违”引起的,“三违”仍然是制约集团公司安全生产形势根本好转的顽症。2010年的工作重点是：巩固2009年的成果、提高全员安全意识、落实全员安全责任、规范全员安全行为。做好以上工作的前提是把预防措施落到实处,突出“预防为主”这个主题。     

关于湿法脱硫系统取消GGH的研究

烟气脱硫是我国电力环境保护的硬性要求,源于德国技术的脱硫系统设计,我国的脱硫装置大多都安装了烟气换热器(GGH),实践表明:GGH运行起来问题很多,堵塞、腐蚀、易卡涩、费用高、占地面积大等弊端是GGH无法避免的.发达国家的烟气脱硫正在向取消GGH的方向发展,在此阐述了产生这些问题的机理,并根据我国国情,权衡利弊,论证了在我国烟气脱硫系统中取消GGH的科学可行性.     

城市污水处理厂污泥沉降影响因素研究

研究总结了目前城市污水处理厂污泥沉降影响的因素，概括总结了pH值、溶解氧、温度、盐度等环境因素以及磁场等外部环境因素对不同性状污泥的沉降影响。为污泥沉降脱水最佳条件提供了研究思路，也为污泥后续机械脱水提供了基础。     

钢铁企业含锌尘泥资源化利用途径分析评价

通过分析锌元素进入钢铁制造流程的渠道,明确了钢铁企业含锌尘泥的来源与循环路径。根据含锌尘泥的循环途径,综合分析比较国内外含锌尘泥的不同利用方式和工艺——改变循环路径、物理选矿法、火法工艺以及湿法工艺。本着钢铁工业与锌冶炼之间形成工业化生态链的思路,提出了钢铁企业含锌尘泥的处理原则和资源化利用模式。     

底泥中酸性挥发硫及同步浸提金属的测定

同步浸提金属与酸性挥发硫的比值在判断底泥重金属生物毒性方面有重要意义．描述了一套测定底泥酸性挥发硫和同步浸提金属的仪器装置和分析程序．从气体流速、反应时间、酸浓度、硫含量等方面研究了酸性挥发硫测定的最适反应条件．在此条件下酸性挥发硫的测定回收率可达９０％以上．该方法的最低检出限为００２μｍｏｌ／ｇ（干泥）．     

几种粘土矿物对Pb~(2+)的吸附作用及其主要影响因素的探讨

对土壤中常见的三种粘土矿物对Pb2+的吸附作用及其主要影响因素进行了探讨。结果表明，三种粘土矿物对Pb2+的吸附能力顺序为：蒙脱石＞伊利石＞高岭石。蒙脱石对Pb2+的吸附受pH的强烈影响，pH高有利于对Pb2+的吸附。与蒙脱石形成复合体形式的有机化合物的存在不利于蒙脱石对Pb2+的吸附。     

城市合流污水A２/O处理系统中TTC ETS活性监测研究

研究了温度和F/M的变化对A^２/O系统TTCETS活性的影响,分析了TTCETS活性与COD降解的相关关系;通过低C/N冲击下TTCETS活性和理化指标的比较,讨论了以TTCETS活性表征系统运行状况的优劣.结果表明,一定范围内,温度与F/M均与TTCETS活性成正相关,TTCETS活性(TF/TSS·t)变化范围约13.2～48.3 mg/(g·h),最大值约为60 mg/(g·h);TTCETS活性与COD去除率相关性显著,并且TTCETS活性可预警系统的异常状态,当TTCETS活性为41.0 mg/(g·h)时,COD去除效率最高.