Nitrogen oxides emissions from the MILD combustion with the conditions of recirculation gas

The nitrogen oxides (NO_x) reduction technology by combustion modification which has economic benefits as a method of controlling NO_x emitted in the combustion process, has recently been receiving a lot of attention. Especially, the moderate or intense low oxygen dilution (MILD) combustion which applied high temperature flue gas recirculation has been confirmed for its effectiveness with regard to solid fuel as well. MILD combustion is affected by the flue gas recirculation ratio and the composition of recirculation gas, so its NO_x reduction efficiency is determined by them. In order to investigate the influence of factors which determine the reduction efficiency of NO_x in MILD coal combustion, this study changed the flow rate and concentration of nitrogen (N₂), carbon dioxide (CO₂) and steam (H₂O) which simulate the recirculation gas during the MILD coal combustion using our lab-scale drop tube furnace and performed the combustion experiment. As a result, its influence by the composition of recirculation gas was insignificant and it was shown that flue gas recirculation ratio influences the change of NO_x concentration greatly. Implications: We investigated the influence of factors determining the nitrogen oxides (NO_x) reduction efficiency in MILD coal combustion, which applied high-temperature flue gas recirculation. Using a lab-scale drop tube furnace and simulated recirculation gas, we conducted combustion testing changing the recirculation gas conditions. We found that the flue gas recirculation ratio influences the reduction of NO_x emissions the most.     

The Effects of Local Cooling on Thermophysiological Response in Participants Wearing Dust-Free Garments

This study was designed to find the effects of two kinds of dust-free garments with (A) and without (B) frozen gel strip (FGS), and half-naked clothing (brassiere and shorts; C) on thermophysiological parameters and on temperature and humidity within clothing. The heart rate, rectal, and skin temperatures as well as sweat rate and clothing microclimate were measured during 140 min in 9 healthy females. Inquiries were also made into the subjective rating of thermal, humidity, and comfort sensations. The main findings in our experiments are as follows: (a) Physiological parameters such as rectal and skin temperatures (chest and forehead), heart rate, and sweat rate were clearly lowest in garb C, intermediate in garb A, and highest in garb B throughout the experiment; (b) Temperature and humidity within clothing were lower in garb A than in garb B; (c) More than half of the 9 participants decreased thermal sensation by wearing garb A. These results suggest that the usage of FGS could improve the heat load in lightly working participants wearing dust-free garments.     

Factors controlling sorption of prosulfuron by variable-charge soils and model sorbents

Prosulfuron [1-(4-methoxy-6-methyltriazin-2-yl)-3-[2-(3,3,3-trifluoropropyl) phenylsulfonyl]-urea), a relatively new sulfonylurea herbicide, is a weak acid (pK(a) 3.76), and therefore, will undergo pH-dependent speciation and sorption. Understanding prosulfuron sorption in soils is important for predicting its environmental fate. Soil and solution factors controlling sorption were investigated by measuring prosulfuron sorption on five model sorbents (amorphous silica, alpha-alumina, CaSWy1 montmorillonite, commercial humic acid, and anion exchange resin) and 10 variable-charge soils from CaCl(2) and Ca(H(2)PO(4))(2) solutions as a function of pH and ionic strength. Anion exchange of prosulfuron accounted for up to 82% of overall sorption in the pH range from 3 to 7. The relative importance of anion exchange to prosulfuron sorption was positively correlated to the ratio of anion and cation exchange capacities. Comparison between organic carbon (OC)-normalized sorption (K(oc)) versus pH for humic acid and variable-charge soils show similar trends with sorption decreasing with increasing pH. However, K(oc) values estimated from variable-charge soils in the lower pH range where anion exchange has the greatest contribution to sorption was almost one log unit greater than that estimated from humic acid clearly exemplifying the impact of anion exchange. Similarity in K(oc)-pH curves for humic acid and variable-charge soils may result from the fact that (i) cation exchange capacity increases with increasing OC content, thus effective anion exchange capacity is reduced; and (ii) the relative contribution of hydrophobic and hydrophilic sorption mechanisms was fairly constant. Given that both hydrophilic and hydrophobic sorption of prosulfuron decrease with increasing pH, addition of fertilizer and lime amendments may enhance the potential for off-site leaching of recently applied acidic pesticides.     

Novel method for determining pyrene biodegradation using synchronous fluorimetry

To study the biodegradation rate of pyrene dissolved in liquid medium supplemented with mineral salts, a synchronous fluorimetry (SF) method was established. The limit of detection for pyrene dissolved in mineral salts medium (MSM) was determined as 0.19 ng/ml with a relative standard deviation of less than 1.3% (n = 9). The pyrene degrading rates of four bacterial strains were investigated using this method under the same experimental conditions. The degradation rates of the three active strains ranged from 76% to 87% after a 14-h incubation. The results were confirmed by the gas chromatography with a flame ionized detector (GC/FID) method. This implies that pyrene degradation can be directly monitored by the SF method without the solvent extraction of samples. The advantages of SF are that it is less laborious, faster, and less expensive than the GC/FID determination method with solvent extraction. The SF method provides a new tool for studying the degradation of polynuclear aromatic hydrocarbons (PAHs) in the natural environment and under experimental conditions.     

Vertical distribution and characteristics of soil humic substances affecting radionuclide distribution

The humic substances extracted from different soil depths are separated into humic (HA) and fulvic (FA) acids, and characterized for their chemical composition, proton exchange capacity, spectroscopic characteristics and binding properties to the europium ion. The chemical and spectroscopic results show that FA compared to HA has a relatively high O/C ratio, high acidic functional group contents and low aromatic contents. The synchronous fluorescence spectroscopic results show that the stability constant (K) of the soil humic substances with Eu(III) ion tends to increase as the soil depth becomes deeper, and HA has a slightly stronger binding ability than FA. The measured total site concentrations (C(L)) reveal that Eu(III) ion is loaded onto HA by 62-77% of the total acid sites, but FA is only approximately 50% covered by Eu(III) ion. Information could be useful in understanding the migration of radionuclides in soil layer.     

Estimation of 222Rn release from the phosphogypsum board used in housing panels

Phosphogypsum board is a popular construction material used for housing panels in Korea. Phosphogypsum often contains (226)Ra which decays into (222)Rn through an alpha transformation. (222)Rn emanated from the (226)Ra-bearing phosphogypsum board has drawn the public concern due to its potential radiological impacts to indoor occupants. The emanation rate of (222)Rn from the board is estimated in this paper. A mathematical model of the emanation rate of (222)Rn from the board is presented and validated through a series of experiments. The back diffusion effect due to accumulation of (222)Rn-laden air was incorporated in the model and found to have a strong impact on the (222)Rn emanation characteristics.     

Simulation of Nitrogen Transport in Soil Under Municipal Wastewater Application Using LEACHN1

Abstract: To reduce the risk of surface and ground water pollution from nitrate, and in so doing improve the quality of receiving waters, better management options for land application of wastewater must be explored. In order to determine proper and environmentally safe wastewater land application methods, different application scenarios were simulated in this study to determine the fate and transport of nitrogen in sand‐filled field lysimeters. The Leaching Estimation and CHemistry Model for Nutrients (LEACHN) model was used to assess alternative wastewater land application scenarios: applications of low‐, medium‐, or high‐N concentration wastewaters, at different rates (0.06, 0.19, 0.31, or 0.6 m³/m²/day), under continuous or intermittent application. In the simulations, the NO₃^?‐N levels decreased in the leachate with an increase in wastewater application rates, due to enhanced denitrification in the upper anoxic zone of the soil generated under high flow rates. With low‐N concentrated wastewater, under all tested flow rates, the NO₃^?‐N levels in the leachate were below the permissible limit. When medium‐N wastewater was applied, the NO₃^?‐N level in leachate from the highest flow rate was below the permissible limit. Therefore, wastewater with low‐N concentrations, about 10 and 0.5 mg/l NO₃^?‐N and NH₄⁺‐N, may be continuously applied to soil at all tested flow rates, with minimal nitrate pollution problems. Medium and high‐N concentrated wastewaters increased nitrate levels in the leachate, as compared to their levels in the low‐N concentrated wastewater. It appears that while low‐N wastewater can be safely applied to land without much nitrate leaching problems, the application of medium and high‐N wastewater could pose nitrate pollution problems. The simulation with intermittent application of low‐, medium‐, and high‐N concentrated wastewater at different rates showed a 51‐89% greater reduction in NO₃^?‐N levels in the leachate, than for continuous application under all tested wastewater N‐levels and flow rates. Also, the levels of NO₃^?‐N in their leachates were below the permissible limit. Therefore, wastewater with high levels of nitrogenous compounds (up to 54 NO₃‐N mg/l) could be treated through an intermittent application to land.     

Fouling coverage of a green tide alga, Ulva pertusa on some antifouling test surfaces exposed to Ayagin harbor waters, east coast of South Korea

Toxic antifouling chemicals released into the seawaters leads to marine environmental degradation. In order to identify a nontoxic antifoulant, an assessment of antifouling (AF) efficacy of some AF candidates was made at Ayagin harbor, east coast of South Korea. In this static panel study conducted during October 2000-March 2001, some commercial antifoulants, seaweed and seagrass extracts were screened. On panel surfaces coated with a seaweed extract, Ishige okamurae exhibited effective AF activity. Ulva pertusa was encountered as a 'monospecific' fouler with fairly high fouling coverage on many of the test panel surfaces. In recent years the increased influx of inorganic pollutants in the coastal waters causes exorbitant growth of fouling marine algae found all along the Korean peninsula. Especially, a cosmopolitan ship fouling alga U. pertusa occur with high abundance. It was largely suggested that the proposed international ban on the toxic antifoulant tributyltin (TBT) had significant effect on the 'green tide' phenomenon occurring in different parts of the world. However, it appears that Korean scenario of 'green tide' is a localized. Antifouling efficacy of some AF coatings and fouling coverage of a green tide alga, U. pertusa are discussed.     

Design of a water quality monitoring network in a large river system using the genetic algorithm

Despite several decades of operations and the increasing importance of water quality monitoring networks, the authorities still rely on experiential insights and subjective judgments in siting water quality monitoring stations. This study proposes an integrated technique which uses a genetic algorithm (GA) and a geographic information system (GIS) for the design of an effective water quality monitoring network in a large river system. In order to develop a design scheme, planning objectives were identified for water quality monitoring networks and corresponding fitness functions were defined using linear combinations of five selection criteria that are critical for developing a monitoring system. The criteria include the representativeness of a river system, compliance with water quality standards, supervision of water use, surveillance of pollution sources and examination of water quality changes. The fitness levels were obtained through a series of calculations of the fitness functions using GIS data. A sensitivity analysis was performed for major parameters such as the numbers of generations, population sizes and probability of crossover and mutation, in order to determine a good fitness level and convergence for optimum solutions. The proposed methodology was applied to the design of water quality monitoring networks in the Nakdong River system, in Korea. The results showed that only 35 out of 110 stations currently in operation coincide with those in the new network design, therefore indicating that the effectiveness of the current monitoring network should be carefully re-examined. From this study, it was concluded that the proposed methodology could be a useful decision support tool for the optimized design of water quality monitoring networks.