Persistent organochlorine residues in northern fur seal from the Pacific coast of Japan since 1971

The present study was conducted to determine the residue levels of persistent organochlorines such as PCB homologues, DDT and its metabolites, and HCH isomers in the ventral blubber of female northern fur seal (Callorhinus ursinus) collected off Sanriku, the Pacific coast of northern Japan, since 1971. Among the organochlorines examined, the concentrations of PCBs and DDTs were found to be high in all samples. The residue levels of these two contaminants showed a drastic reduction following maturity and then a slight increase after the retirement from pregnancy/menopause. Temporal variation of PCB and DDT residues showed maximum levels around 1976 and then decreased, whereas HCH residue levels revealed a very slow declining pattern. Considering the concentrations and compositions of the residues, the northern fur seal is likely to be exposed to organochlorine contamination deriving from global terms. In this context, continuous contamination has been foreseen with regard to PCB and HCH residues. The pattern of organochlorine residues indicated that the northern fur seal has higher metabolic capacity than Dall's porpoise, while it is comparable to those of larga seal and Steller sea lion.     

Methane production potential of leachate generated from Korean food waste recycling facilities: a lab-scale study

This paper examines the applicability of food waste leachate (FWL) in bioreactor landfills or anaerobic digesters to produce methane as a sustainable solution to the persisting leachate management problem in Korea. Taking into account the climatic conditions in Korea and FWL characteristics, the effect of key parameters, viz., temperature, alkalinity and salinity on methane yield was investigated. The monthly average moisture content and the ratio of volatile solids to total solids of the FWL were found to be 84% and 91%, respectively. The biochemical methane potential experiment under standard digestion conditions showed the methane yield of FWL to be 358 and 478 ml/g VS after 10 and 28 days of digestion, respectively, with an average methane content of 70%. Elemental analysis showed the chemical composition of FWL to be C(13.02)H(23.01)O(5.93)N(1). The highest methane yield of 403 ml/g VS was obtained at 35 degrees C due to the adaptation of seed microorganisms to mesophilic atmosphere, while methane yields at 25, 45 and 55 degrees C were 370, 351 and 275 ml/g VS, respectively, at the end of 20 days. Addition of alkalinity had a favorable effect on the methane yield. Dilution of FWL with salinity of 2g/l NaCl resulted in 561 ml CH(4)/g VS at the end of 30 days. Considering its high biodegradability (82.6%) and methane production potential, anaerobic digestion of FWL in bioreactor landfills or anaerobic digesters with a preferred control of alkalinity and salinity can be considered as a sustainable solution to the present emergent problem.     

Hydrochemical Monitoring and Heavy Metal Contaminations at the Narim Mine Creek in the Sulcheon District, Republic of Korea

The Narim gold mine is located approximately 200km southeast of Seoul within the Sulcheon mineralised district in the Yeongnam massif, Korea. In this study, environmental geochemical analyses were undertaken for soil, sediment and water samples collected in April, September and November in 1998 from the Narim mine creek. The mine area consists mainly of granitic gneiss; however, mineral constituents of soil and sediment near the mine were mainly composed of quartz, feldspar, mica, amphibole, some pyrite and clay minerals. Also were found some pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, malachite, goethite, various hydroxide and unidentified secondary minerals. Generally, high concentrations of heavy metals in the soil and sediment are correlated with a high proportion of secondary minerals. Hydrochemical compositions of water samples are characterised by relative significant enrichment of Na⁺+K⁺ and alkali metals in the ground water, whereas the surface and mine waters are relatively enriched in Ca²⁺+Mg²⁺ and heavy metals. Anion contents of the ground waters are typically enriched in HCO₃ ^–, NO₃ ^– and Cl^–, whereas the surface and mine waters are highly enriched in HCO₃ ^– and SO₄ ^2–. The pH and EC values of the surface water from the non-mine creek are relatively lower compared with those of the surface water around the mine and waste dump. The range of D and ¹⁸O values (d parameters) of the water samples are shown in distinct two groups for the April waters of 10.1–13.1, and for the November waters of 5.8–7.9, respectively. This range variation indicates that two group water were composed of distinct waters because of seasonal difference. Geochemical modelling showed that mostly heavy toxic metals may exist largely in the form of free metal (M²⁺) and metal-sulphate (MSO₄ ^2–), and SO₄ ^2– concentration influenced the speciation of heavy metals in the mine water. These metals in the ground water could be formed of CO₃ ^– and OH^– complex ions. Using a computer program, saturation indices of albite, calcite, dolomite in mostly surface water show undersaturated and progressively evolved toward the saturation state, however, ground and mine waters are nearly saturated. The gibbsite, kaolinite and smectite are supersaturated in the surface and ground water, respectively. Calculated water-mineral reaction and stabilities suggest that the weathering of silicate minerals may be stable kaolinite. The clay minerals of K-illite and Na-smectite will be transformed to more stable kaolinite owing to the continuous reaction.     

Effect of reactive media composition and co-contaminants on sulfur-based autotrophic denitrification

As a part of a study developing a biological reactive barrier system to treat nitrate-contaminated groundwater, the effects of reactive media composition and co-contaminants on sulfur-oxidizing autotrophic denitrification were investigated. The size of sulfur granules affected the denitrification rates; kinetic constants of 2.883, 2.949, and 0.677 mg-N(1/2)/L(1/2)/day were obtained when the granule sizes were below 2 mm, between 2 and 5 mm, and over 5 mm, respectively. When the volume ratios of sulfur to limestone were 1:1, 2:1, 3:1, and 4:1, kinetic constants of 5.490, 3.903, 4.072, and 2.984 mg-N(1/2)/L(1/2)/day were obtained, respectively. The presence of TCE up to 20 mg/L didn't significantly affect nitrate removal efficiency. At the TCE concentration of 80 mg/L, however, nitrate removal was markedly inhibited. Also, Zn and Cu inhibited the denitrification activity at more than 0.5 mg/L of concentration whereas Cr (VI) did not significantly affect the nitrate removal efficiency at all levels tested.     

Investigation of heavy metal accumulation in Polygonum thunbergii for phytoextraction

In this study, cadmium (II), lead (II), copper (II) and zinc (II) were determined in Polygonum thunbergii and soil from the Mankyung River watershed, Korea. Soil samples contained detectable lead (<17.5 g g(-1)), copper (<8.4 g g(-1)) and zinc (<24.5 g g(-1)), whereas cadmium was undetectable. Whole plants of P. thunbergii contained detectable lead (<320.8 g g(-1)), copper (<863.2 g g(-1)) and zinc (<2427.3 g g(-1)), whereas cadmium was detectable only in the stem (<7.4 g g(-1)) and root (<10.1 g g(-1)). Whole plant concentrations were very different for each metal, particularly in the case of zinc. The mean content of heavy metal in the whole plants increased in the order of cadmium (8.5 g g(-1))相似文献   

Characterization and reactivity of natural manganese ore catalysts in the selective catalytic oxidation of ammonia to nitrogen

Natural manganese ore (NMO) catalysts were characterized and tested in the selective catalytic oxidation of ammonia to nitrogen oxides under dilute conditions. Also, the oxidation of ammonia (NH(3)) was carried out using pure MnO(2), Mn(2)O(3) for comparing with the activity. It is found that the activity of NMO was similar to that of MnO(2) at low temperature below 150 degrees C but above this temperature, the activity of these catalysts showed the difference. In the course of NH(3) oxidation, N(2), NO, N(2)O and H(2)O were produced. But the quantity of NO(2) produced in this experiment was negligible. At temperature below 250 degrees C, selectivity into N(2) from NH(3) oxidation was in the order, NMO > MnO(2) > Mn(2)O(3). This is the reverse of activity of these manganese oxides. Also the characterization of NH(3) oxidation was proposed and supported by the effect of space velocity, inlet O(2) and NH(3) concentration. The increase of space velocity remarkably influenced not only the conversion but also selectivity into N(2). The higher the reaction temperature was, the higher the effect of inlet O(2) and NH(3) concentration on the reaction rate was. By introducing NO during NH(3) oxidation reaction, the possibility of NMO as selective catalytic reduction catalyst at low temperature was studied and showed positive results.     

Characterizing As(III,V) adsorption by soils surrounding ash disposal facilities

Leachate derived from unlined coal ash disposal facilities is a potential anthropogenic source of arsenic to the environment. To establish a theoretical framework for predicting attenuation of arsenic by soils subject to ash landfill leachate, which is typically enriched in calcium and sulfate, the adsorption of As(V) and As(III) was characterized from 1 mM CaSO₄ for 18 soils obtained down-gradient from three ash landfill sites and representing a wide range in soil properties. As(V) consistently exhibited an order of magnitude greater adsorption than As(III). As(V) adsorption was best described by coupling pH with 15 s DCB-Fe (R² = 0.851,  = 0.001), although pH coupled to clay, DCB-Fe, or DCB-Al also generated strong correlations. For As(III), pH coupled to Ox–Fe (R² = 0.725,  = 0.001) or Ox–Fe/Al (R² = 0.771,  = 0.001) provided the best predictive relationships. Ca²⁺ induced increases in As(V) adsorption whereas sulfate suppressed both As(V) and As(III) adsorption. Attenuation of arsenic from ash leachate agreed well with adsorption measured from 1 mM CaSO₄ suggesting that the use of 1 mM CaSO₄ in laboratory adsorption tests is a reasonable approach for estimating arsenic behavior in soils surrounding ash landfills. We also showed that the impact of leachate-induced changes in soil pH over time may not be significant for As(V) adsorption at pH < 7; however, As(III) adsorption may be impacted over a wider pH range especially if phyllosilicate clays contribute significantly to adsorption. The benefits and limitations of predicting arsenic mobility using linearized adsorption coefficients estimated from nonlinear adsorption isotherms or from the relationships generated in this study are also discussed.     

Evaluation of SWAT sub-daily runoff estimation at small agricultural watershed in Korea

A study was undertaken for the prediction of runoff flow from 0.8 ha field-sized agricultural watershed in South Korea using Soil and Water Assessment Tool (SWAT) sub-daily. The SWAT model with sub-daily configuration predicted flow from the watershed within the range of acceptable accuracy. The SWAT sub-daily simulations were carried out for a total of 18 rainfall events, 9 each for calibration and validation. Overall trend and extent of matching simulated flow for the rainfall events in 2007-2008 with measured data during the calibration process were coefficient of determination (R²) value of 0.88 and Nash and Sutcliffe Efficiency (E_NS) value of 0.88. For validation, R² and E_NS values were 0.9 and 0.84, respectively. Whereas R² and E_NS values for simulation results using daily rainfall data were 0.79 and -0.01, respectively, that were observed to be out of acceptable limits for the model simulation. The importance of higher time resolution (hourly) precipitation records for flow simulation were evaluated by comparing R² and E_NS with 15 min, 2 h, 6 h and 12 h precipitation data, which resulted in lower statistics with increases in time resolution of precipitation data. The SWAT sub-daily sensitivity analysis was performed with the consideration of hydraulic parameter and was found as in the rank order of CN2 (curve number), ESCO (soil evaporation compensation factor), GW_DELAY (ground water delay time), ALPHA_BF ( base flow alpha factor), GWQMN ( a threshold minimum depth of water in the shallow aquifer required for return flow to occur) , REVAPMN (minimum depth of water in shallow aquifer for re-evaporation to occur) , LAT_TIME (lateral flow travel time) respectively. These sensitive parameters were evaluated at 10% higher and lower values of the parameters, corresponding to 70.5% higher and 23.2% lower in simulated flow out from the SWAT model. From the results obtained in this study, hourly precipitation record for SWAT sub-daily with Green-Ampt infiltration method was proven to be efficient for runoff estimation at field sized watershed with higher accuracies that could be efficiently used to develop site-specific Best Management Practices (BMPs) considering rainfall intensity, rather than simply using daily rainfall data.     

A hierarchical end-of-life decision model for determining the economic levels of remanufacturing and disassembly under environmental regulations

Remanufacturing, in contrast to material recycling and disposal, can reduce environmental impacts by retaining the geometrical form of the product, thereby regarded as a more eco-efficient approach. In this paper, an end-of-life (EOL) decision model for remanufacturing options is presented to facilitate remanufacturing. The proposed model, in order to maximize the economic value of remanufacturing options while meeting environmental regulations, takes an integrative approach to EOL-option decision-making. Also presented in this paper is a hierarchical approach that represents both the overall hierarchical structure of a product and the interconnections among components. Illustrative examples are provided to demonstrate the effectiveness of the model.