TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner

Hazard and operability (HAZOP) studies constitute an essential step in the risk analysis of any chemical process industry and involve systematic identification of every conceivable abnormal process deviation, its causes and abnormal consequences. These authors have recently proposed optHAZOP as an alternative procedure for conducting HAZOP studies in a shorter span of time than taken by conventional HAZOP procedure, with greater accuracy and effectiveness [Khan, F. I. and Abassi, S. A., optHAZOP. An effective and efficient technique for hazard identification and assessment Journal of Loss Prevention in the Process Industries, 1997, 10, 191–204]. optHAZOP consists of several steps, the most crucial one requires use of a knowledge-based software tool which would significantly reduce the requirement of expert man-hours and speed up the work of the study team. TOPHAZOP (Tool for OPTmizing HAZOP) has been developed to fulfil this need.

The TOPHAZOP knowledge-base consists of two main branches: process-specific and general. The TOPHAZOP framework allows these two branches to interact during the analysis to address the process-specific aspects of HAZOP analysis while maintaining the generality of the system. The system is open-ended and modular in structure to make easy implementation and/or expansion of knowledge. The important features of TOPHAZOP and its performance on an industrial case study are described.     

The impact of impression‐management tactics on supervisor ratings of organizational citizenship behavior

Previous research indicates that the use of impression management is related to supervisor ratings of employee likeability and job performance. It has been argued, though, that employees might also use impression management so that their superiors will see them as ‘good soldiers’ who engage in high levels of organizational citizenship behaviors (OCBs). This study investigates the ways in which three types of impression management—namely, job‐focused, self‐focused, and supervisor‐focused tactics of impression management—influence supervisor ratings of OCB. Using a sample of 122 supervisor‐subordinate dyads, the findings indicate that supervisor‐focused tactics of impression management are positively related to OCB ratings, while job‐focused tactics are negatively related to such evaluations. Additionally, citizenship behaviors are positively related to supervisor liking of the employee and overall ratings of job performance. Finally, the results suggest that OCB ratings mediate the relationship between supervisor‐focused tactics of impression management and supervisor evaluations of employee likeability. Some implications of this study and directions for future research are also addressed. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of Cross-Linking Waste Protein with Diepoxides on its Biodegradation under Anaerobic Conditions

Biodegradability testing was performed in an aqueous environment under anaerobic conditions after inoculation with digested sludge from municipal wastewater treatment plant. In cross-linking with 1,2:3,4-diepoxybutane in limits 0.8–9.1% weight, biodegradability degree decreased from 76.8 to 62.2%; when 1,2:7,8 diepoxyoctane in quantities 1.1–13.2% weight was used, biodegradability degree dropped more prominently – from 72.3 to 22.8%. There is obviously a direct connection between growing cross-link degree (assessed by so-called fixation index) and decreasing readiness to biodegradation, apparently owing to build-up of a network forming an obstacle to access of micro-organisms and enzymes.     

Development of Layered Sediment Structure and its Effects on Pore Water Transport and Hyporheic Exchange

Hyporheic exchange is known to provide an important control on nutrient and contaminant fluxes across the stream-subsurface interface. Similar processes also mediate interfacial transport in other permeable sediments. Recent research has focused on understanding the mechanics of these exchange processes and improving estimation of exchange rates in natural systems. While the structure of sediment beds obviously influences pore water flow rates and patterns, little is known about the interplay of typical sedimentary structures, hyporheic exchange, and other transport processes in fluvial/alluvial sediments. Here we discuss several processes that contribute to local-scale sediment heterogeneity and present results that illustrate the interaction of overlying flow conditions, the development of sediment structure, pore water transport, and stream-subsurface exchange. Layered structures are shown to develop at several scales within sediment beds. Surface sampling is used to analyze the development of an armor layer in a sand-and-gravel bed, while innovative synchrotron-based X-ray microtomography is used to observe patterns of grain sorting within sand bedforms. We show that layered bed structures involving coarsening of the bed surface increase interfacial solute flux but produce an effective anisotropy that favors horizontal pore water transport while limiting vertical penetration.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

Deposition and Fate of Lead in a Forested Catchment, Lesni Potok, Central Czech Republic

The deposition of trace elements and their fate in a forest ecosystemhas been monitored at the experimental site, Lesni Potok catchment (LP), with granite bedrock. The catchment is located 30 km ESE from Prague. Annual bulk Pb-deposition flux F_Pb was 3.41 kg km^-2 a^-1 in 1994 and gradually decreased to 0.49 kg km^-2 a^-1 in 2001. The decrease is comparable with those observed in Germany and in the U.S.A. in the 1970s and 1980s. The total sales ban of leaded gasoline in the Czech Republic since January 2001 was accompanied by a pronounced decrease of F_Pb in a single year. The residual Pb-deposition flux is assigned to both the long-range transport of fine-grained vehicular lead aerosol (with a long residence time in the atmosphere) and to theemissions from power plant boilers burning lignite mined in the Czech northwest coal basin. The F_Pb of lead correlates stronglywith those of As, Cd, Cu, Zn and Be, the typical metals in coal fly ash, at two monitored sites. Topsoil horizons contain elevated concentrations of Pb (53–67 mg kg^-1), which are of anthropogenicorigin. Soils in the riparian areas contain increased concentrations of Pb when compared to soils on the hillslope areas. Significant amounts of Pb were found on a stream substrate and Fe-precipitate sampled from the stream. Low concentrations of Pb in bark and bole wood suggest that the uptake of Pb by vegetation is negligible. The very small surface water outputs (average of 0.002 kg km^-2 a^-1) compared to inputs (average of 1.890 kg km^-2 a^-1) from the LP catchment indicate an ongoing accumulation of Pb in a forested landscape.     

Measurements of PCB Fluxes into the Atmosphere from a Site Receiving Stabilized Dredged Material

A 50 ha known contaminated site in Bayonne, New Jersey, U.S.A. is permitted to receive up to 3 × 10⁶ m³ of sediment dredged from navigation channels in the New York/New Jersey Harbor. Much of the sediment is expected to contain low to moderate concentrations of industrial and agricultural chemicals, including Polychlorinated Biphenyls (PCBs). The dredged material brought to the site is stabilized with cement and then placed as a capping and grading layer. The flux of PCBs from drying stabilized dredged material has been estimated from measurements of PCB air concentrations at two heights above the ground along with micrometeorological observations. A statistically significant gradient in PCB concentrations has been consistently measured in the first 3 m above the ground. Observed PCB fluxes were highest over freshly placed stabilized dredged sediment and decreased as it cured. The highest flux observed in this study was 7214 ng/m²/h, but during subsequent sampling intervals at the same site, the flux estimates decreased by an order of magnitude over a 5-day interval.     

Application of the operating window concept to remediation‐option selection

An Erratum has been published for this article in Remediation 14(4) 2004, 141. The selection of remediation options for the management of unacceptable risks at contaminated sites is hindered by insufficient information on their performance under different site conditions. Therefore, there is a need to define “operating windows” for individual remediation options to summarize their performance under a variety of site conditions. The concept of the “operating window” has been applied as both a performance optimization tool and decision support tool in a number of different industries. Remediation‐option operating windows could be used as decision support tools during the “options appraisal” stage of the Model Procedures (CLR 11), proposed by the Environment Agency (EA) for England and Wales, to enhance the identification of “feasible remediation options” for “relevant pollutant linkages.” The development of remediation‐option operating windows involves: 1) the determination of relationships between site conditions (“critical variables”) and option performance parameters (e.g., contaminant degradation or removal rates) and 2) the identification of upper‐ and lower‐limit values (“operational limits”) for these variables that define the ranges of site conditions over which option performance is likely to be sufficient (the “operating window”) and insufficient (the “operating wall”) for managing risk. Some research has used case study data to determine relationships between critical variables and subsurface natural attenuation (NA) process rates. Despite the various challenges associated with the approach, these studies suggest that available case study data can be used to develop operating windows for monitored natural attenuation (MNA) and, indeed, other remediation options. It is envisaged that the development of remediation‐option operating windows will encourage the application of more innovative remediation options as opposed to excavation and disposal to landfill and/or on‐site containment, which remain the most commonly employed options in many countries. © 2004 Wiley Periodicals, Inc.     

Gender in the boss–subordinate relationship: a Nigerian study

The present study examines the interaction effect of gender of both subordinates and supervisors on subordinates' perception of differentiation of boss–subordinate relationship in an African setting. Data was collected from a total of 60 boss–subordinate dyads in four‐sex combinations obtained through a survey of a large five‐star hotel in Abuja, Nigeria. Results revealed that subordinates in opposite‐sex dyads perceived better quality of exchange than those in same‐sex dyads. The strongest quality of exchange was perceived in male boss–female subordinate dyad, while the weakest was perceived in female boss–female subordinate dyad. This emphasizes the importance of gender in the differentiation of boss–subordinate relationships in an African setting. Copyright © 2004 John Wiley & Sons, Ltd.     

Evidence of integration of air quality management in the decision-making processes and procedures of English local government

The air quality management (AQM) framework in the UK is a risk management approach using effects-based objectives for air pollutants to determine the need for action. The Environment Act 1995 required a National Air Quality Strategy to be published, setting out health-based standards and objectives for eight pollutants, of which seven are to managed at a local scale. Because of the variety of sources of air pollution, if the AQM process is to succeed in the long term, solutions to identified problems will be required from transport, land use and economic planning sectors of local government in liaison with various other agencies, regulators and outside bodies. As such the task is inherently multi-disciplinary and an integrated, collaborative approach will be necessary. Although this observation is now fairly well documented, there is still little guidance relating to how, in relation to air quality management, integration can actually be accomplished. This paper presents some observations from case studies undertaken as part of a longer-term research study and in particular focuses on the identified problems of involving non-air-quality professionals in a highly technical scientific process. Various approaches to the collaborative aspects of air quality management will be presented. These case studies represent local authorities of different sizes in different political and organisational situations facing a range of air quality challenges. The creation of project teams or task forces is judged particularly useful for local air quality management. Methods that could be applied more widely include appointing individuals as integrators, and rotation of key personnel.