Biodegradation characteristics of organic matters in swine carcasses under different initial operating conditions of simulated anaerobic lysimeter

This study was aimed to investigate the biodegradation characteristics of organic matters in swine carcasses. The lysimeters were simulated with different initial operating conditions: 30 % volumetric moisture content and no sludge addition for lysimeter A (control), 30 % volumetric moisture content and anaerobic sludge addition for lysimeter B, and 40 % volumetric moisture content and anaerobic sludge addition for lysimeter C. The degradation efficiency (18.4 %) of lysimeter B was higher than that (15.2 %) of lysimeter A due to anaerobic sludge addition. Lysimeter B showed higher CH₄ yield (15.6 L/kg VS) and CH₄ production rate (0.41 L/kg VS days) compared to lysimeter A by 31 % and 14 %, respectively. In addition, the degradation efficiency improved from 18.4 % (lysimeter B) to 26.3 % (lysimeter C) by increasing volumetric moisture content. The CH₄ yield (22.9 L/kg VS) and CH₄ production rate (0.68 L/kg VS days) of lysimeter C were higher than those of lysimeter B, respectively. Total organic carbon (TOC) removed in lysimeter C was converted to leachate (20.3 %) and gas (6.0 %), whose values were higher than those of lysimeter A and B. These results demonstrated that the proper control of initial operating conditions could accelerate the anaerobic degradation of organic matters in swine carcasses.     

Valorisation of used cooking oil sludge by codigestion with swine manure

The addition of lipid wastes to the digestion of swine manure was studied as a means of increasing biogas production. Lipid waste was obtained from a biodiesel plant where used cooking oil is the feedstock. Digestion of this co-substrate was proposed as a way of valorising residual streams from the process of biodiesel production and to integrate the digestion process into the biorefinery concept.Batch digestion tests were performed at different co-digesting proportions obtaining as a result an increase in biogas production with the increase in the amount of co-substrate added to the mixture. Semi-continuous digestion was studied at a 7% (w/w) mass fraction of total solids. Co-digestion was successful at a hydraulic retention time (HRT) of 50 d but a decrease to 30 d resulted in a decrease in specific gas production and accumulation of volatile and long chain fatty acids. The CH₄ yield obtained was 326 ± 46 l/kg VS_feed at an HRT of 50 d, while this value was reduced to 274 ± 43 l/kg VS_feed when evaluated at an HRT of 30 d. However these values were higher than the one obtained under batch conditions (266 ± 40 l/kg VS_feed), thus indicating the need of acclimation to the co-substrate. Despite of operating at low organic loading rate (OLR), measurements from respirometry assays of digestate samples (at an HRT of 50 d) suggested that the effluent could not be directly applied to the soil as fertiliser and might have a negative effect over soil or crops.     

Role of allochthonous carbon in the energy of terrestrial invertebrate communities at different distances from the Black Sea and a freshwater lake (Isotopic Evidence)

Isotopic analysis has become an important tool in the study of lateral links between ecosystems. The isotopic composition of carbon in terrestrial and aquatic primary producers can differ significantly, which provides an opportunity to identify the “marine” or “freshwater” carbon in the tissues of terrestrial animals. We measured the isotopic composition of C and N in tissues of soil invertebrates and estimated the proportion of “aquatic” carbon in the energy budget of terrestrial food webs at different distances from the Black Sea and a freshwater lake. Terrestrial predators are actively subsidized with carbon from the Black Sea to distance of up to about 50 m. The carbon subsidy from the freshwater lake is significant in the zone extending no farther than the forest border (ca. 15 m). Thus, the effect of allochthonous organic matter on terrestrial communities in both cases manifests itself only in a relatively narrow coastal strip.     

Selection and integration of environmental impacts in the Danish transport infrastructure assessment process

Transport projects have numerous consequences for the environment, society and economy, and thus an EU Directive has stated a number of impacts that need to be assessed prior to any major intervention. This paper is set in a Danish context where the EU requirements have been adopted in the Environmental Impact Assessment (EIA) regulation along with national requirements. In recent years, however, the EIAs have been criticised for an inconsistent inclusion of impacts and unclear assessment process. A selection of EIAs is for this reason reviewed and compared to the EU Directive and corresponding works in Sweden and the UK to identify potential opportunities for improvements. From the literature study, an overview table with all potential relevant impacts for transport projects is set up to assist the EIA process. For the sake of simplicity and transparency, the impacts selected from this table should, however, be further reduced in number to ensure that only the most important impacts are included in the process. To further increase simplicity and transparency in the EIA process, a novel framework for assessing different types of impacts is proposed. In this framework, a comprehensive decision support tool involving stakeholders is in focus. The framework is supplemented with a procedure for generating objectives and presenting results in an appropriate way to the many stakeholders involved. The impacts overview table and the assessment techniques are applied to a case study to illustrate the process, and finally, conclusions and perspectives for future work within the field are set out.     

Mobility of free surface in different liquids and its influence on water striders locomotion

Dynamics of the surface layer in different liquids is examined by means of infrared thermography of the surface and simultaneous velocity fields measurements using surface and infrared Particle Image Velocimetry. This technique allows measurements and comparison of two velocity fields—at the surface and at small depth about 50–200 μm. In distilled water the velocity fields at the surface and at small depth exhibit significant dissimilarity. The flow field below the surface is essentially 3D, whereas the surface flow is characterized by vanishing 2D divergence of velocity, indicating predominantly planar motion. In contrast, in ethanol–butanol mixture two velocity fields are well correlated, both corresponding to 3D flow with continuous surface renewal. Thermal patterns, observed at the surface, and the flow field structure in different liquids are associated with different boundary conditions for velocity at the surface. Water surface is seldom renewed, which inhibits heat and mass exchange between the liquid and atmosphere. However, absence of vertical advection also enables organisms to live within the surface layer, to stand and walk on the free surface. This is illustrated by the difficulties a water strider faces on the surface of ultrapure water, which exhibits Marangoni convection.     

Assessing relative vulnerability to sea-level rise in the western part of the Mekong River Delta in Vietnam

The Mekong River Delta in Vietnam plays a crucial role for the region in terms of food security and socioeconomic development; however, it is one of the most low-lying and densely populated areas in the world. It is vulnerable to seawater incursion, flood risk, and shoreline change, exacerbated as a consequence of sea-level rise (SLR) related to climate change. This study examined the Kien Giang coast in the western part of the delta, comprising seven coastal districts (namely Ha Tien, Kien Luong, Hon Dat, Rach Gia, Chau Thanh, An Bien, and An Minh), the economy of which is important in terms of agriculture and aquaculture. The analytical hierarchical process (AHP) method of multi-criteria decision making was integrated directly into geographic information systems (GIS) to derive a composite vulnerability index that indicated areas most likely to be vulnerable to SLR. The hierarchical structure comprised three key components: exposure (E), sensitivity (S), and adaptive capacity (A), at level 1. At the next level, 8 sub-components were mapped: seawater incursion, flood risk, shoreline change, population characteristics, land use/land cover, and socioeconomic, infrastructure, and technological capability, beyond which a further 22 variables (level 3) and 24 sub-variables (level 4) related to vulnerability were also mapped. Variables were assigned weights for incorporation into AHP pairwise comparisons after discussion with stakeholders. Maps were generated to visualise areas where the relative vulnerability was very low, low, moderate, high, and very high. Societal data were generally only available at district level; however, several regional patterns emerged. Relatively high exposure to flooding and inundation, salinity, and moderate loss of mangroves occurred along the coastal fringe of each district. This western section of the delta, which is low-lying and remote from the distributaries that carry sediment to the coast, appears to be particularly vulnerable. The most sensitive areas tended to be ethnic households engaged in rice cultivation and with moderate population density. The least adaptable areas consisted of high numbers of poor households, with low income, and moderate densities of transport, irrigation and drainage systems. Most coastal districts were determined to be moderately to relatively highly vulnerable, with scattered hotspots along the coast.     

Effects of soil moisture depletion on vegetable crop uptake of pharmaceuticals and personal care products (PPCPs)

Agricultural crops have a long history of being irrigated with recycled wastewater (RW). However, its use on vegetable crops has been of concern due to the potential prevalence of microcontaminants, such as pharmaceuticals and personal care products (PPCPs) in the latter, which represents a possible health hazard to consumers. We investigated the uptake of three PPCPs (atenolol, diclofenac, and ofloxacin), at three different concentrations in irrigation water (0.5, 5, and 25 μg L^?1) in relation to three varying volumetric soil moisture depletion levels of 14 % (?4.26 kPa), 10 % (?8.66 kPa), and 7 % (?18.37 kPa) by various vegetable crop species. Experiments were conducted in a split-split block completely randomized design. PPCPs were extracted using a developed method of accelerated solvent extraction and solid phase extraction and analyzed via liquid chromatography mass spectrometry (LCMS). Results indicate that all treated crops were capable of PPCP uptake at nanogram per gram concentrations independent of the applied soil moisture depletion levels and PPCP concentrations. Ofloxacin was the chemical with the highest uptake amounts, followed by atenolol and then diclofenac. Although the results were not statistically significant, higher concentrations of PPCPs were detected in plants maintained under higher soil moisture levels of 14 % (?4.26 kPa).