Cost-Effective Mitigation of Diffuse Pollution: Setting Criteria for River Basin Management at Multiple Locations

A case study of the Yorkshire Derwent (UK) catchment is used to illustrate an integrated approach for assessing the viability of policy options for reducing diffuse nitrate losses to waterbodies. For a range of options, modeling methods for simulating river nitrate levels are combined with techniques for estimating the economic costs to agriculture of modifying those levels. By incorporating spatially explicit data and information on catchment residence times (which may span many decades particularly in areas of groundwater discharge) a method is developed for efficient spatial targeting of measures, for example, to the most at-risk freshwater environments. Combining hydrological and economic findings, the analysis reveals that, in terms of cost-effectiveness, the ranking of options is highly sensitive to both (i) whether or not specific stretches of river within a catchment are regarded as a priority for protection, and (ii) the criterion of nitrate concentration deemed most appropriate as an indicator of the health of the environment. Therefore, given the focus under European legislation upon ecological status of freshwaters, these conclusions highlight the need to improve understanding of mechanistic linkages between the chemical and biological dynamics of aquatic systems.     

Flood management: prediction of microbial contamination in large-scale floods in urban environments

With a changing climate and increased urbanisation, the occurrence and the impact of flooding is expected to increase significantly. Floods can bring pathogens into homes and cause lingering damp and microbial growth in buildings, with the level of growth and persistence dependent on the volume and chemical and biological content of the flood water, the properties of the contaminating microbes, and the surrounding environmental conditions, including the restoration time and methods, the heat and moisture transport properties of the envelope design, and the ability of the construction material to sustain the microbial growth. The public health risk will depend on the interaction of these complex processes and the vulnerability and susceptibility of occupants in the affected areas. After the 2007 floods in the UK, the Pitt review noted that there is lack of relevant scientific evidence and consistency with regard to the management and treatment of flooded homes, which not only put the local population at risk but also caused unnecessary delays in the restoration effort. Understanding the drying behaviour of flooded buildings in the UK building stock under different scenarios, and the ability of microbial contaminants to grow, persist, and produce toxins within these buildings can help inform recovery efforts. To contribute to future flood management, this paper proposes the use of building simulations and biological models to predict the risk of microbial contamination in typical UK buildings. We review the state of the art with regard to biological contamination following flooding, relevant building simulation, simulation-linked microbial modelling, and current practical considerations in flood remediation. Using the city of London as an example, a methodology is proposed that uses GIS as a platform to integrate drying models and microbial risk models with the local building stock and flood models. The integrated tool will help local governments, health authorities, insurance companies and residents to better understand, prepare for and manage a large-scale flood in urban environments.     

Direct and indirect effects of ammonia, ammonium and nitrate on phosphatase activity and carbon fluxes from decomposing litter in peatland

Here we investigate the response of soils and litter to 5 years of experimental additions of ammonium (NH₄), nitrate (NO₃), and ammonia (NH₃) to an ombrotrophic peatland. We test the importance of direct (via soil) and indirect (via litter) effects on phosphatase activity and efflux of CO₂. We also determined how species representing different functional types responded to the nitrogen treatments. Our results demonstrate that additions of NO₃, NH₄ and NH₃ all stimulated phosphatase activity but the effects were dependent on species of litter and mechanism (direct or indirect). Deposition of NH₃ had no effect on efflux of CO₂ from Calluna vulgaris litter, despite it showing signs of stress in the field, whereas both NO₃ and NH₄ reduced CO₂ fluxes. Our results show that the collective impacts on peatlands of the three principal forms of nitrogen in atmospheric deposition are a result of differential effects and mechanisms on individual components.     

Relative kinetic measurements of rate coefficients for the gas-phase reactions of Cl atoms and OH radicals with a series of methyl alkyl esters

Relative kinetic studies have been performed on the reactions of Cl atoms with a series of methyl alkyl esters in a 405-liter borosilicate glass chamber at (298 ± 3) K and one atmosphere of synthetic air using in situ FTIR spectroscopy to monitor the reactants. Rate coefficients (in units of cm³ molecule^?1 s^?1) were determined for the following compounds: methyl acetate (2.48 ± 0.58) × 10^?12; methyl propanoate (1.68 ± 0.36) × 10^?11; methyl butanoate (4.77 ± 0.87) × 10^?11; methyl pentanoate (7.84 ± 1.15) × 10^?11; methyl hexanoate (1.09 ± 0.31) × 10^?10; methyl heptanoate (1.56 ± 0.37) × 10^?10; methyl cyclohexane carboxylate (3.32 ± 0.76) × 10^?10; methyl-2-methyl butanoate (9.41 ± 1.39) × 10^?11.In addition rate coefficients (in units of 10^?11 cm³ molecule^?1 s^?1) have been obtained for the reactions of OH radicals with the following compounds: methyl butanoate (3.55 ± 0.71), methyl pentanoate (5.41 ± 1.08), and methyl-2-methyl butanoate (4.08 ± 0.82).Using the kinetic rate data tropospheric lifetimes for the methyl alkyl esters with respect to their reactions with OH, and Cl have been estimated for typical ambient air concentrations of these oxidants.     

Duration of paternal care in pine engraver beetles: why do larger males care less?

Male pine engravers, Ips pini (Coleoptera: Scolytidae), assist their mates during reproduction by removing the debris that accumulates while females excavate oviposition tunnels in the phloem tissue of host tree bark. Although duration of paternal care and male reproductive success are positively correlated, large males leave their mates and brood sooner than small males. We address two hypotheses to explain the earlier departure of larger males from their breeding galleries: (1) females oviposit most rapidly when paired with large males, thereby reducing the length of time that paternal care increases male reproductive success, (2) larger males have better prospects for future reproduction, and thus leave their galleries in search of new breeding opportunities sooner than smaller males. Contrary to the first hypothesis, when females were paired either with large or small males, there was no effect of male size on their rate of oviposition. Consistent with the second hypothesis, males that initiated breeding galleries were larger than males from the general population. In addition, large males flew farther and faster on flight mills than small males, which may indicate that large males have an advantage in locating suitable breeding sites. Thus, we suggest that large male pine engravers leave their galleries earlier than small males because large individuals have better prospects for future reproduction. Received: 30 November 1997 / Accepted after revision: 23 May 1998     

Biomonitoring with Gammarus pulex at the Meuse (NL), Aller (GER) and Rhine (F) rivers with the online Multispecies Freshwater Biomonitor

Biological early warning systems represent a set of tools that may be able to respond to certain chemical monitoring requirements of recent European legislation, the Water Framework Directive (WFD2000/60/EC), that aims to improve and protect water quality across Europe. In situ biomonitoring was performed along the rivers Meuse (NL), Aller (GER) and Rhine (F) within the frame of the European Union-funded Project SWIFT-WFD. Gammarus pulex was used as a test organism during the evaluation of the Multispecies Freshwater Biomonitor(R) (MFB), an online biomonitor to quantitatively record different behaviour patterns of animals. At the river Meuse G. pulex reacted to pulse exposure of either a mixture of trace metals or of several organic xenobiotics, by showing up to 20% decreased locomotory activity (already at the 1st pulse) and increased mortality (at 2nd or 3rd pulse only). G. pulex deployed within the MFB system were observed to survive well at the monitoring station on the Aller (100%) and monitoring did not result in the measurement of chemical irregularities. In contrast, deployment at the monitoring station on the Rhine river demonstrated that the test organism was able to detect chemical irregularities by up to 20% decreased locomotory activity in the animals. The MFB proved to be an alert system for water quality monitoring at sensitive sites and sites with accidental pollution.     

Modelling PCB bioaccumulation in a Baltic food web

A steady state model is developed to describe the bioaccumulation of organic contaminants by 14 species in a Baltic food web including pelagic and benthic aquatic organisms. The model is used to study the bioaccumulation of five PCB congeners of different chlorination levels. The model predictions are evaluated against monitoring data for five of the species in the food web. Predicted concentrations are on average within a factor of two of measured concentrations. The model shows that all PCB congeners were biomagnified in the food web, which is consistent with observations. Sensitivity analysis reveals that the single most sensitive parameter is log K(OW). The most sensitive environmental parameter is the annual average temperature. Although not identified amongst the most sensitive input parameters, the dissolved concentration in water is believed to be important because of the uncertainty in its determination. The most sensitive organism-specific input parameters are the fractional respiration of species from the water column and sediment pore water, which are also difficult to determine. Parameters such as feeding rate, growth rate and lipid content of organism are only important at higher trophic levels.     

Chemcatcher and DGT passive sampling devices for regulatory monitoring of trace metals in surface water

This work aimed to evaluate whether the performance of passive sampling devices in measuring time-weighted average (TWA) concentrations supports their application in regulatory monitoring of trace metals in surface waters, such as for the European Union's Water Framework Directive (WFD). The ability of the Chemcatcher and the diffusive gradient in thin film (DGT) device sampler to provide comparable TWA concentrations of Cd, Cu, Ni, Pb and Zn was tested through consecutive and overlapping deployments (7-28 days) in the River Meuse (The Netherlands). In order to evaluate the consistency of these TWA labile metal concentrations, these were assessed against total and filtered concentrations measured at relatively high frequencies by two teams using standard monitoring procedures, and metal species predicted by equilibrium speciation modeling using Visual MINTEQ. For Cd and Zn, the concentrations obtained with filtered water samples and the passive sampling devices were generally similar. The samplers consistently underestimated filtered concentrations of Cu and Ni, in agreement with their respective predicted speciation. For Pb, a small labile fraction was mainly responsible for low sampler accumulation and hence high measurement uncertainty. While only the high frequency of spot sampling procedures enabled the observation of higher Cd concentrations during the first 14 days, consecutive DGT deployments were able to detect it and provide a reasonable estimate of ambient concentrations. The range of concentrations measured by spot and passive sampling, for exposures up to 28 days, demonstrated that both modes of monitoring were equally reliable. Passive sampling provides information that cannot be obtained by a realistic spot sampling frequency and this may impact on the ability to detect trends and assess monitoring data against environmental quality standards when concentrations fluctuate.