Occurrence of organic pollutants in recovered soil fines from construction and demolition waste

The objective of this study was to characterize recovered soil fines from construction and demolition (C&D) waste recycling facilities for trace organic pollutants. Over a period of 18 months, five sampling trips were made to 14 C&D waste recycling facilities in Florida. Screened soil fines were collected from older stockpiles and newly generated piles at the sites. The samples were analyzed for the total concentration (mg/kg) of a series of volatile organic compound (VOCs) and semi-volatile organic compounds (semi-VOCs). The synthetic precipitation leaching procedure (SPLP) test was also performed to evaluate the leachability of the trace organic chemicals. During the total analysis only a few volatile organic compounds were commonly found in the samples (trichlorofluoromethane, toluene, 4-isopropyltoluene, trimethylbenzene, xylenes, and methylene chloride). A total of nine VOCs were detected in the leaching test. Toluene showed the highest leachability among the compounds (61.3-92.0%), while trichlorofluoromethane, the most commonly detected compound from both the total and leaching tests, resulted in the lowest leachability (1.4-39.9%). For the semi-VOC analysis, three base-neutral semi-VOC compounds (bis(2-ethylhexyl)phthalate, butyl benzyl phthalate, and di-n-butyl phthalate) and several PAHs (acenaphthene, pyrene, fluoranthene, and phenanthrene) were commonly detected in C&D fines samples. These compounds also leached during the SPLP leaching test (0.1-25%). No acid extractable compounds, pesticides, or PCBs were detected. The results of this study were further investigated to assess risk from land applied recovered soil fines by comparing total and leaching concentrations of recovered soil fines samples to risk-based standards. The results of this indicate that the organic chemicals in recovered soil fines from C&D debris recycling facilities were not of a major concern in terms of human risk and leaching risk to groundwater under reuse and contact scenarios.     

Trans-boundary air pollution over remote islands in Japan: observed data and estimates from a numerical model

Observations of air pollutants were conducted in remote Japanese islands (Oki Island and Okinawa Island) in early spring to clarify the extent of trans-boundary air pollution from the Asian continent. A three-dimensional Eulerian model calculation, which included parameters on emission, transport and transformation of sulfur oxides, nitrogen oxides and ammonia, was performed to compile sulfate isosurface concentrations over the observational sites. Concentrations of non-sea-salt sulfate (nss-SO₄²⁻) of greater than 10 μg m⁻³ were observed at Oki after the northeastward passage of low-pressure systems in the Sea of Japan. At these times, the weather showed a typical winter pattern and air pollutants over China were transported southeastward to Japan with the northwesterly wind. The model calculation reproduced the observed variations of nss-SO₄²⁻ concentration well, except for one case in which the model calculation could not reproduce the extremely low nss-SO₄²⁻ concentration observed on 8 March. In Hedo (Okinawa Island), we observed long-lasting (3 days) medium concentrations of nss-SO₄²⁻ (approximately 5 μg m⁻³). Although the model reproduced these observed medium concentrations well, in general the observed results were reproduced better for Oki than for Hedo. Under the synoptic weather conditions of early spring, high concentrations of nss-sulfate were sometimes transported to these remote Japanese islands from areas of continental Asia with a strong outflow of air pollutants.     

Changes in microcystin content and environmental parameters over the course of a toxic cyanobacteria bloom in a hypertrophic regulated river, South Korea

Cyanobacterial blooms and associated microcystins in hypertrophic stagnant West-Nakdong River were investigated at weekly intervals from April to August, 1999. Microcystis spp. accounted for over 85% of the numeric abundance of total phytoplankton. Microcystins were present in the blooms sampled between May and August. The peak of total microcystin (microcystin-LR + -RR) levels (maximum level; 612 microg g(-1)) was detected in the initial stage of the bloom (mid May), at the same time as high N/P ratio and high Microcystis biomass. This study indicated that total microcystins of this regulated river was positively correlated to Microcystis biomass, absolute nutrient concentration and TN/TP ratio.     

Metals in airborne particulate matter from the first and second industrial complex area of Taejon city, Korea

To understand the metal distribution characteristics in a rapidly urbanized area, we collected and analyzed particulate matter (PM) samples for the metal concentrations. Using our measurement data for various metal species, we examined both the extent of metal pollution in the study area and the seasonality in their distribution characteristics. Results showed that each metal exhibited their occurrences in diverse concentration ranges over several orders of magnitude such as the mean values ranging from minimum value of 0.07 (Be) to maximum value of 1633 ng m(-3) (Fe). In addition, the extent of metal pollution in the study area was in general comparable with those typically observed from a strongly polluted urban area, if comparison was made with the results of previous studies. Examinations of their temporal distribution patterns indicated that most of metals tend to exhibit seasonal peaks during winter (or spring) seasons, similarly to the observed pattern for PMs. Moreover to explain the factors regulating their mobilization properties, the data were analyzed through the application of correlation analysis. Results of our correlation analysis showed that most metals can exhibit strong positive correlations each other, while they tend to be inversely correlated with most of important meteorological parameters (including air temperature and precipitation). Based on the overall results of our study, we conclude that the site may be strongly impacted by man-made sources but that many characteristics of their cycling are not significantly different from those generally observed from natural environments.     

A case study of development and application of a streamlined control and response modeling system for PM2.5 attainment assessment in China

This article describes the development and application of a streamlined air control and response modeling system with a novel response surface modeling-linear coupled fitting method and a new module to provide streamlined model data for PM_(2.5) attainment assessment in China.This method is capable of significantly reducing the dimensions required to establish a response surface model,as well as capturing more realistic response of PM_(2.5) to emission changes with a limited number of model simulations.The newly developed module establishes a data link between the system and the Software for Model Attainment Test—Community Edition(SMAT-CE),and has the ability to rapidly provide model responses to emission control scenarios for SMAT-CE using a simple interface.The performance of this streamlined system is demonstrated through a case study of the Yangtze River Delta(YRD) in China.Our results show that this system is capable of reproducing the Community Multi-Scale Air Quality(CMAQ) model simulation results with maximum mean normalized error 3.5%.It is also demonstrated that primary emissions make a major contribution to ambient levels of PM_(2.5) in January and August(e.g.,more than50%contributed by primary emissions in Shanghai),and Shanghai needs to have regional emission control both locally and in its neighboring provinces to meet China's annual PM_(2.5)National Ambient Air Quality Standard.The streamlined system provides a real-time control/response assessment to identify the contributions of major emission sources to ambient PM_(2.5)(and potentially O_3 as well) and streamline air quality data for SMAT-CE to perform attainment assessments.     

Experimental and numerical calculations of waste R-134a thermal decomposition for energy and fluorine material recovery

Considering the global warming potential of R-134a (C₂H₂F₄) with the substantial generation of this refrigerant as waste material in various industrial sectors, the development of proper thermal destruction method of R-134a is of great practical significance. For this, experiment and numerical calculations have initially made for a tubular-type furnace in order to figure out the basic combustion characteristics of R-134a. A series of experimental investigations for the thermal decomposition of R-134a have been made as a function of wall temperature of tubular furnace and important reacting species such as O₂ and H₂O necessary for the decomposition of C₂H₂F₄ into HF, CO₂ and H₂O. In general, the thermal decomposition of R-134a is successfully made for the condition of temperature above 800 °C with the supply of stoichiometric amount of O₂ and these results are well agreed with numerical prediction. And this information is employed for the simulation of a full-scale, practical incinerator used for the CDM project. For this, numerical investigation has been made for a commercial-scale incinerator using CH₄–air flames for the proper destruction C₂H₂F₄ together with the control of pollutants such as CO and NO. In general, the destruction rate of C₂H₂F₄ appears more than 99.99 % and the generation of CO and NO species appears rather sensitive to the operational condition such as amount of water vapor. The numerical method of HFCs (hydrofluorocarbons) thermal treatment shows high possibility as a viable tool for the proper design and optimal determination of the operational condition for a HFCs incinerator.     

Prediction of Cd toxicity to Daphnia magna in the mixture of multi-walled carbon nanotubes and kaolinite

In this study, we investigated cadmium toxicity created by adsorption kinetics in several mixtures containing two types of multi-walled carbon nanotubes (COOH-MWCNT and NH₂-MWCNT) and natural kaolinite. Characteristics of two types of MWCNTs were measured by zeta potential and ATR FT-IR graphs and TEM images. The solution of CNTs and kaolinite was tested to study Cd adsorption kinetics and mechanisms of differentiation-associated toxicity using Daphnia magna in a binary system (Cd–MWCNTs and Cd–kaolinite) and a ternary system (Cd–MWCNTs–kaolinite). In the binary system, Cd removal efficiency was nearly 100% and 40% for MWCNTs and kaolinite because of surface charge, respectively, with increasing sorbent concentration. In the ternary system, the trend of adsorption rate was similar to that of binary system. In comparison with percent mortality in the binary system, the solution in the ternary system showed higher toxicity due to the interaction of MWCNTs–kaolinite coagulated particles, thereby decreasing Cd adsorption onto CNTs and kaolinites. Overall, kaolinite can affect the adsorption process of Cd on MWCNTs in negative ways, depending on adsorption state. In conclusion, our studies suggest that kaolinite differs with adsorption ability of Cd by MWCNTs, and toxicity is likely to be produced by multivariable regression in the adsorption state.

     

Characterization of pollutants in Florida street sweepings for management and reuse

Disposal and beneficial-use options for street sweeping residuals collected as part of routine roadway maintenance activities in Florida, USA, were assessed by characterizing approximately 200 samples collected from 20 municipalities. Total concentrations (mg/kg or μg/kg) and leachable concentrations (mg/L or μg/L) of 11 metals and a number of organic pollutant groups (volatile organics, semi-volatile organics, pesticides, herbicides, carbamates) in the samples were measured. The synthetic precipitation leaching procedure (SPLP) was performed to evaluate the leachability of the pollutants. From the total metal analysis, several metals (e.g., arsenic, barium, chromium, copper, nickel, lead, and zinc) were commonly found above their detection limits. Zinc was found to have the highest mean concentration of all metals measured (46.7 mg/kg), followed by copper (10.7 mg/kg) and barium (10.5 mg/kg). The metal with the smallest mean concentration was arsenic (0.48 mg/kg). A small fraction of the total arsenic, barium, lead, and zinc leached in some samples using the SPLP; leached concentrations were relatively low. A few organic compounds (e.g., 4,4′-DDT, endrin, and endosulfan II) were detected in a limited number of samples. When the total and leaching results were compared to risk-based Florida soil cleanup target levels and groundwater cleanup target levels, the street sweepings were not found to pose a significant human-health risk via direct exposure or groundwater contamination.     

Evaluation of environmental impacts of food waste management by material flow analysis (MFA) and life cycle assessment (LCA)

This paper focuses on the evaluation of potential environmental impacts of food waste management practices by material flow analysis (MFA) and life cycle assessment (LCA) during different life cycle stages toward the environmentally sustainable options for Daejeon Metropolitan City (DMC) in Korea. The MFA and LCA studies were conducted to examine different recycling facilities of food waste. The results of the LCA study indicate that, among the different recycling methodologies currently in practice in DMC, Scenario 4 (wet and dry feed site) conduced to higher global warming potential (GWP) and higher acidification potential (AP), whereas Scenarios 2 (wet feed site 1) and 3 (wet feed site 2) resulted in the lowest impact. This is mainly due to the emission caused during the treatment stage. For eutrophication potential (EP), Scenario 1 (composting site) contributed to higher environmental impacts due to the emission of ammonia generated during the treatment process, while in case of photochemical ozone creation potential (POCP), the collection stage for all recycling facilities led to higher impacts to the environment due to the combustion of fossil fuels. This study indicates that the proper disposal of the final residues, such as solid sludge and screened materials, could aid in reducing environmental burdens.