Prenatal diagnosis of thrombocytopenia absent radius syndrome using ultrasound and fetoscopy

The prenatal diagnosis of thrombocytopenia absent radius syndrome in both dizygotic twins utilizing ultrasound, radiography and fetoscopy is described.     

Additive und synergistische Kombinationswirkungen von Xenobiotika in subtoxischen Konzentrationen auf menschliche Fibroblasten

The toxic combination effects of xenobiotics of different substance classes were investigated in human fibroblasts. Subtoxic concentrations of 4-chloroaniline enhanced the toxicity of 2,4-dichlorophenoxyacetic acid (2,4-D, dimethylammonium salt) in an additive manner. A mixture of 4-chloroaniline, dicofol and 4-chlorophenol increased the toxicity of 2,4-D synergistically. The concentrations of the components used in the mixture were one third of their ?no observed effect concentrations” (NOEC). The combination of 4-chloroaniline, dicofol and 4-chlorophenol (without 2,4-D) at subtoxic concentrations also showed synergistic effects. The great differences in the lipophilicity of the combined substances might be the cause of the synergistic action.     

Levels of dioxins and dioxin-like PCBs in food samples on the Greek market

Food intake is the main source of exposure to dioxin-like compounds for humans. The results of a surveillance programme on polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and co-planar polychlorinated biphenyls (co-PCBs) in 77 food samples from the Greek market and producers are presented. The study included the analyses of milk and dairy products, meat and meat products, fish, vegetable oil, eggs, fruit, vegetable and rice collected between August and December 2002. After extraction, extracts were cleaned up on a series of carbon column chromatography, silica gel, alumina chromatography, and then analysed by high resolution gas chromatography/high resolution mass spectrometry. All samples had a dioxin content far below the EC Regulation (2375/2001/EC) limits.     

Fines migration from soil daily covers in Hong Kong landfills

Laboratory tests using 240 mm diameter columns were conducted to study fines migration in conditions that simulate daily soil covers in Hong Kong municipal solid waste landfills. Five factors suspected to affect fines migration were examined: moisture content at soil compaction, overburden pressure, pumping rate, cover thickness, and soil-waste interface condition. The results show that moisture content at compaction, cover thickness, and soil-waste interface are the most influential parameters on fines migration in completely decomposed granite daily covers. The measured equivalent sizes of migratory fines from the soil covers were in the range of 4–140 μm. The majority of migratory fines migrated during first permeations, representing 64–86% of the total by mass. Larger particles tended to migrate from the soil mass during the saturation process. In a typical run, about 0.0018% of the total cover soil (by dry weight) was washed out during a typical 1 h rainfall event. The results of the laboratory studies point to important engineering implications on the operation of local MSW landfills regarding the use of sandy daily covers.     

Evaluation of an approach for the characterization of reactive and available pools of 20 potentially toxic elements in soils: part II--solid-solution partition relationships and ion activity in soil solutions

To assess environmental risks related to contaminants in soil it is essential to predict the available pool of inorganic contaminants at regional scales, accounting for differences between soils from variable geologic and climatic origins. An approach composed of a well-accepted soil extraction procedure (0.01 M CaCl(2)) and empirical Freundlich-type models in combination with mechanistically based models which to date have been used only in temperate regions was applied to 136 soils from a South European area and evaluated for its possible general use in risk assessment. Empirical models based on reactive element pools and soil properties (pH, organic carbon, clay, total Al, Fe and Mn) provided good estimations of available concentrations for a broad range of contaminants including As, Ba, Cd, Co, Cu, Hg, Mo, Ni, Pb, Sb, Se and Zn (r(2): 0.46-0.89). The variation of the pools of total Al in soils expressed the sorptive capacity of aluminosilicates and Al oxides at the surfaces and edges of clay minerals better than the actual variability of clay contents. The approach has led to recommendations for further research with particular emphasis on the impact of clay on the solubility of As and Sb, on the mechanisms controlling Cr and U availability and on differences in binding properties of soil organic matter from different climatic regions. This study showed that such approach may be included with a good degree of certainty for first step risk assessment procedures to identify potential risk areas for leaching and uptake of inorganic contaminants in different environmental settings.     

Analytik von Mineralölkohlenwasserstoffen: Die Problematik der Probenaufbereitung

For the determination of mineral oil hydrocarbons in water and soil, IR-as well as GC/FID-methods (DEV H-18, ISO/TR 11046, NEN 5733) are used. Independent of the measurement method, different clean-up procedures are prescribed in these standard methods. Aluminium oxide, silica gel and magnesium silicate (Florisil^®) are used as adsorbents. This article describes the problems of clean-up occurring in mineral oil analysis using selected substances. Tests concerning the type of adsorbent, extract medium, clean-up-technique and extract/adsorbent-ratio are presented. It will be shown that the clean-up procedure has to be counted as a significant factor of influence in the determination of mineral oil hydrocarbons. The sources of errors resulting from clean-up as well as the possibilities to avoid them are presented. An extraction solvent for soils which is simple to handle and optimally adjustable to the requirements of the clean-up procedure is presented.     

The role of hydrodynamics, matrix and sampling duration in passive sampling of polar compounds with Empore SDB-RPS disks

There is an increasing need to monitor concentrations of polar organic contaminants in the aquatic environment. Integrative passive samplers can be used to assess time weighted average aqueous concentrations, provided calibration data are available and sampling rates are known. The sampling rate depends on environmental factors, such as temperature and water flow rate. Here we introduce an apparatus to investigate the sampling properties of passive samplers using river-like flow conditions and ambient environmental matrices: river water and treated sewage effluent. As a model sampler we selected Empore SDB-RPS disks in a Chemcatcher housing. The disks were exposed for 1 to 8 days at flow rates between 0.03 and 0.4 m s(-1). Samples were analysed using a bioassay for estrogenic activity and by LC-MS-MS target analysis of the pharmaceuticals sulfamethoxazole, carbamazepine and clarithromycin. In order to assess sampling rates of SDB disks, we also measured aqueous concentrations of the pharmaceuticals. Sampling rates increased with increasing flow rate and this relationship was not affected by the environmental matrix. However, SDB disks were only sampling in the integrative mode at low flow rates <0.1 m s(-1) and/or for short sampling times. The duration of linear uptake was particularly short for sulfamethoxazole (1 day) and longer for clarithromycin (5 days). At 0.03 m s(-1) and 12-14 degrees C, the sampling rate of SDB disks was 0.09 L day(-1) for clarithromycin, 0.14 L day(-1) for sulfamethoxazole and 0.25 L day(-1) for carbamazepine. The results show that under controlled conditions, SDB disks can be effectively used as passive sampling devices.     

Carbon monoxide and carbon dioxide concentrations in Santiago de Chile associated with traffic emissions

CO/CO₂ ratios have been measured in different locations of Santiago de Chile city. Measurements were carried out in a tunnel (prevailing emissions from cars with catalytic converter) and close to heavy traffic streets. Concentrations measured along the city traffic tunnel or temporal profiles of concentrations measured near heavy traffic streets allow an estimation of CO/CO₂ ratios emitted from mobile sources. Values obtained range from 0.0045 ± 0.0006 to 0.0100 ± 0.0004 and depend on the prevailing type of mobile sources. In particular, lowest values were found close to a street with heavy traffic dominated by diesel-powered public transportation, while the highest values were found at the city tunnel. Places located near streets of mixed mobile sources (public buses and cars) showed intermediate values. Average CO/CO₂ ratios are compatible with emission factors proposed for Santiago’s main mobile sources.