Measurements of carbonyls in a 13-story building

BACKGROUND, AIM AND SCOPE: Formaldehyde and acetaldehyde are emitted by many mobile and stationary sources and secondary aldehydes are intermediates in the photo-oxidation of organic compounds in the atmosphere. These aldehydes are emitted indoors by many materials such as furniture, carpets, heating and cooling systems, an by smoking. Carbonyls, mainly formaldehyde and acetaldehyde, have been studied because of their adverse health effects. In addition, formaldehyde is a suspected carcinogen. Therefore, the concentrations of formaldehyde and acetaldehyde were determined to assess the inhalation exposure doses to carbonyls for people who work in a 13-story building and in order to evaluate the cancer hazard. METHODS: Carbonyl compounds in indoor and outdoor air were measured at a 13-story building located in Mexico City. The mezzanine, fifth and tenth floors, and the third level-parking garage were selected for sampling. Samples were collected in two sampling periods, the first from April 20 to 29, 1998 and the second from December 1 to 20, 1998. Carbonyls were sampled by means of DNHP-coated cartridges at a flow rate of 1 l min(-1) from 9:00 to 19:00 hours, during 2-hour time intervals and analyzed by HPLC with hours, during 2-hour time intervals and analyzed by HPLC with UV/VIS detection. RESULTS: Mean carbonyl concentrations were highest in the 3rd level-parking garage, with the formaldehyde concentration being the highest ranging from 108 to 418 microg m(-3). In working areas, the highest carbonyl arithmetic mean concentrations (AM) were observed on the 5th floor. Acetone and formaldehyde concentrations were highest in April ranging from 161 to 348 microg m(-3) (AM = 226) and from 157 to 270 microg m(-3) (AM = 221), respectively. Propionaldehyde and butyraldehyde were present in smaller concentrations ranging from 2 to 25 and 1 to 28 microg m(-3), respectively, considering all the samples. Mean indoor/outdoor ratios of carbonyls ranged from 1.8 to 9.6. A reduction of inhalation exposure doses of 41% and 45% was observed in the fifth floor air after the air conditioning systems had been repaired. Formaldehyde and acetaldehyde concentrations were higher in smoking environments. CONCLUSION: Indoor carbonyl concentrations were significantly greater than outdoor concentrations. Tobacco smoke seems to be the main indoor source of formaldehyde. After the air conditioning system was maintained and repaired (as was recommended), an important reduction in the emission of formaldehyde and acetaldehyde was achieved on all floors, except for the 3rd level parking garage, thereby reducing the inhalation exposure doses. RECOMMENDATION: The results obtained in this research demonstrated that maintenance of air conditioning systems must be carried out regularly in order to avoid possible adverse effects on health. Additionally, it is mandatory that isolated smoking areas, with air extraction systems, be installed in every public building.     

Mechanical Properties, Water Vapor Permeability and Water Affinity of Feather Keratin Films Plasticized with Sorbitol

In poultry industry chicken feathers are normally hydrolyzed and used to prepare animal feed. In this work the use of this material to prepare films was investigated. Keratins were extracted from chicken feathers with 2-mercaptoethanol in concentrated urea solution using sodium dodecyl sulfate (SDS). The effect of varying the amount of sorbitol on properties of chicken feather keratin (CFK) was investigated. As the concentration of plasticizer increased, the moisture content (MC) of these films increase, the monolayer MC increased from 0.060 (without plasticizer) to 0.482 g water/g dry matter (0.30 g sorbitol/g keratin). The water vapor permeability (WVP) varied between 0.096 g/m s Pa and 8.098 g/m s Pa for films without sorbitol and with 0.30 g sorbitol/g keratin, respectively. Film strength decreased from 5.13 MPa to 0.45 MPa and the elongation at break achieved the maximum value of 52.75% for samples with 0.02 g sorbitol/g keratin. The dry matter density didn’t change significantly, varying between 0.86–0.89 g/cm³ for all samples. Films with potential applications in food packaging can be obtained from CFKs. However, further researches are necessary to decrease film solubility and increase mechanical resistance.     

Physical and chemical characterisation of metal finishing industrial wastes

In EU countries approximately 150,000 tons/year of galvanic sludges are generated by 4000 industrial units from the corresponding wastewater treatment plants. These sludges are generally classified as hazardous (European Waste Catalogue as adopted in Council Decision 2000/532/CE and as amended by Decisions 2001/118/EC, 2001/119/EC and 2001/573/CE), basically due to the presence of heavy metals. This work attempts to better understand the physical and chemical characteristics of these sludges, by studying 39 samples collected in different Portuguese industries that should represent all kinds of similar wastes independent of their place of generation. Chemical composition and leaching characteristics are given, together with density, grain size distribution, and specific surface area values. Statistical analysis was used for grouping the wastes according to chemical parameters, which might be useful to predict potential reuse as raw materials for different applications.     

Donax trunculus and Venus verrucosa as bioindicators of trace metal concentrations in Mauritanian coastal waters

Trace-metal concentrations (Cd, Cu, Fe, Mn and Zn) were investigated in two species of abundant filter-feeding molluscs from Mauritania, the wedge shell Donax trunculus L. and the clam Venus verrucosa L. D. trunculus were collected on the beach of Nouakchott at low tide and V. verrucosa were sampled at the Banc d'Arguin at depths varying from 10 to 20 m, in mid-February 1987. D. trunculus contains significantly higher Fe and Zn concentrations than the clam. Total trace-metal content per individual (Y) in D. trunculus could be related to body weight (W) as the power function Y=aW ^b . The subsequent regression coefficient b was >1 for Cu, Fe, Mn and Zn and >1 for Cd. Metal concentrations in both species decreased in the order: Fe>Zn>Mn>Cu>Cd. Comparison of trace-metal concentrations in the small D. trunculus and the large V. verrucosa revealed lower contents in V. verrucosa, except for Cd. The trace-metal distribution in the various organs of V. verrucosa indicates that gills seem to concentrate metals, except Cu, to a greater degree than the other organs (visceral mass and remainder). The relatively elevated content of Fe in D. trunculus and of Cd, Fe and Zn in the gills of V. verrucosa seem to be of natural origin. In view of the scarcity of Mytilus sp. along the Mauritania coast, the molluscs D. trunculus and V. verrucosa are proposed as useful bioindicators of trace-metal concentrations.     

Habitat mapping using machine learning-extended kernel-based reclassification of an Ikonos satellite image

The spatial resolution of satellite imagery suitable for earth resources studies has improved from 80 m (Landsat-MSS, launched in 1972) to 0.6 m (QuickBird, launched in 2001). The conventional pixel-based methods developed for medium resolution satellite images are not suitable for classification of very high spatial resolution images, because the spectral responses of particular habitat classes are much more variable. On the other hand, in the original Barnsley–Barr kernel-based reclassification algorithm not only the spectral information of a pixel but also the textural information in the vicinity of the pixel is used when the pixel labeling decision is made. The first step of the kernel reclassification algorithm is to perform an initial classification of the original image. In the second step, the adjacency-event matrices are computed for each pixel according to co-occurrence frequencies of the initial classes in the kernel window. The degree of matching between an adjacency-event matrix corresponding to specific pixel and the set of class-specific template matrices produced during training is the criterion for pixel re-labeling. We extend the original kernel-based reclassification algorithm with a decision tree-based reclassification, simultaneously taking into account the class-specific similarity images, which are a side-product of the original algorithm. The advantage of decision tree-extended approach over the original approach seems to be the ability of the former to consider more input information, thus increasing the Kappa classification accuracy for an Ikonos image of our study area from 0.56 to 0.60, using a nomenclature containing 10 habitat classes.     

Pollutant dispersion in wetland systems: Mathematical modelling and numerical simulation

In this paper we present and justify an original use of a diffusive-advective partial differential equation model, its discretization procedures and resulting numerical simulations for the dispersal of pollutants in an air–water system, with distinct behaviours in water and in air. The authors believe that the relevance of the developed work lies in its potential use in practical environmental assessment processes for the definition of both preventive and clean-up strategies.     

Landslides into reservoirs and their impacts on banks

Mass wasting processes, like slope failures, on the margins of dam reservoirs, lakes, bays and oceans may generate large water waves that can produce disasters due to flooding over the banks, run up along the shoreline and overtopping dam crests. Therefore, the study of slope failures, the subsequent generation of impulse waves and their consequences are of paramount importance for safety. In this paper the generation and propagation of water waves in reservoirs induced by landslides and their impact on banks were investigated by means of a laboratory study carried out at University of Coimbra wave channel, in a flume measuring 12.0 m  ×  1.5 m  ×  1.0 m (L  ×  H  ×  W), where two banks with variable slope were placed. The study considered the sliding of calcareous blocks over a sliding slope bank into the reservoir, the generation of impulse waves, their propagation in the reservoir and their impact on the downstream bank. A number of waves were generated by different fallings of calcareous blocks, considering different volumes, sliding slopes, initial positions and reservoir depths. All fallings were recorded by video-camera and the results were processed afterwards to obtain the time history of the falling. The water surface variations due to transient waves were measured at five gauges placed between the banks. The waves overtopping and breaking on the downstream bank were also filmed using a video camera, and the hydrodynamic forces on this bank were also measured using four pressure transducers.     

The effect of cadmium on antioxidant responses and the susceptibility to oxidative stress in the hydrothermal vent mussel Bathymodiolus azoricus

Hydrothermal vents are a unique environment of extreme physical–chemical characteristics and biological species composition. Cd is a toxic non-essential metal present in high concentrations in the hydrothermal vent environment, contrary to those found in marine coastal areas. Cd toxicity has been related, among other things, with reactive oxygen species production, even though this is a non-redox metal. Bathymodiolus azoricus is a deep-sea Mytilid bivalve very common in the Mid Atlantic Ridge (MAR) hydrothermal vent fields and very little is known about the antioxidant defence system in this specie. Because lethal Cd concentration in B. azoricus is unknown, the aim of this study was to assess the effects of a Cd concentration higher than that found in the hydrothermal vents on oxidative stress biomarkers, such as antioxidant enzymes. Mussels were exposed to 100 μg l⁻¹ Cd during 24, 48 and 144 h, respectively, in a pressurized aquarium (IPOCAMP). Superoxide dismutase (SOD), catalase (CAT), glutathione peroxidases (GPx), total oxyradical scavenging capacity (TOSC), metallothionein (MT) and lipid peroxidation (LPO) were measured in the gills and mantle of B. azoricus. The results indicate that gills are first affected by Cd toxicity. This may be due to different physiological functions of the tissues and by the presence of thio and methanotrophic symbiotic bacteria in the gills. The SOD and CAT are inhibited during the first day of exposure in the gills, although TOSC and MT concentrations were the same in control and exposed mussels. In the mantle, enzymatic activation only occurred after 6 days, and no significant differences in MT concentrations were found in the control and exposed mussels during the first day, as observed in the gills.     

A simple voltammetric procedure for speciation and evaluation of As removal from water

Here, we show a fast and sensitive method for the determination of inorganic arsenic in natural waters using differential pulse cathodic stripping voltammetry. All the arsenite determinations were done in 2.0 mol L⁻¹ HCl + 3.15 × 10⁻⁴ mol L⁻¹ Cu(II) supporting electrolyte. 1 × 10⁻³ mol L⁻¹ sodium thiosulphate was used as As(V) reducing agent. The detection limit was 0.5 μg L⁻¹ for both species. The method has been applied to water samples collected in an arsenic-contaminated region of Brazil, in particular, to verify the efficiency of the solar oxidation and removal of arsenic process applied to these waters.     

A case study of industrial symbiosis development using a middle-out approach

Industrial symbiosis (IS) emerged as a collective, multi-industrial approach to improve economic and environmental performance through the use of wastes/by-products as substitutes for raw materials. The development of IS initiatives depends on the context in which they occur, characterised in terms of social, economic, political, spatial and temporal embeddedness. As a consequence, the context can be influenced to become more supportive of IS through a continuous, interactive process, combining top-down governmental directives and bottom-up spontaneous business initiatives. A strategy to develop and enhance this process is explored in this paper and described by the authors as a middle-out approach.Policies and policy instruments introduced by governmental agencies provide objectives and incentives to businesses. The middle-out approach induces the development of a strategy to create positive feedback loops among agents (e.g. government, industries) that may guide their actions into setting the conditions to support IS emergence.This paper provides a case study that discusses a regional development of IS in Portugal that highlights critical factors for success in implementing IS, and shows that the middle-out approach can also be understood as an extension and combination of previous research on context factors and planned/spontaneous approaches to IS development.