Study of contaminant transport at an open-tipping waste disposal site

Field and laboratory studies were conducted to estimate concentration of potential contaminants from landfill in the underlying groundwater, leachate, and surface water. Samples collected in the vicinity of the landfill were analyzed for physiochemical parameters, organic contaminants, and toxic heavy metals. Water quality results obtained were compared from published data and reports. The results indicate serious groundwater and surface water contamination in and around the waste disposal site. Analysis of the organic samples revealed that the site contains polychlorinated biphenyls and other organo-chlorine chemicals, principally chloro-benzenes. Although the amount of PCB concentration discovered was not extreme, their presence indicates a potentially serious environmental threat. Elevated concentrations of lead, copper, nickel, manganese, cadmium, and cobalt at the downgradient indicate that the contamination plume migrated further from the site, and the distribution of metals and metals containing wastes in the site is nonhomogeneous. These results clearly indicate that materials are poorly contained and are at risk of entering the environment. Therefore, full characterization of the dump contents and the integrity of the site are necessary to evaluate the scope of the problem and to identify suitable remediation options.     

Risk assessment of pharmaceutically active compounds (PhACs) in the Klang River estuary,Malaysia

Environmental Geochemistry and Health - The concentration profile, distribution and risk assessment of pharmaceutically active compounds (PhACs) in the coastal surface water from the Klang River...     

Effect of pH values on the solubility of some elements in different soil samples

The purpose of this study is to know the concentrations of some heavy-metal elements (Zn, Pb and Cd) in different types of soil and the effect of pH values on their solubility. Two types of soil were selected from area adjacent to the sewage treatment plant, as well as from an agricultural area in the city of Al-Rass, Qassim, KSA for this purpose. The results showed high concentrations of elements in the acidic medium at pH 2, while concentrations decreased as the pH increased to reach the neutral medium. The decrease in concentrations was very clear in the alkaline medium and reached the lowest values at pH10. On the other hand, the highest concentrations were detected in soil adjacent to the sewage treatment specially for Pb and Cd in comparison with agricultural soil. The previous results show the urgent need for wastewater treatment and checking for pH values at standard limits before use in irrigation or discharge it on soil surface, as well as soil analysis prior to the planting and selection of appropriate plants by specialists for the health of citizens, where each plant characterise by its absorption for specific elements.     

Risk-optimal highway design: Methodology and case studies

Highway geometric design in mountainous areas has been a typical challenge. The combination of short horizontal curves and restricted right-of-way is a common ground for contemplating design exception in British Columbia, Canada. In practice, collision modification factors (CMFs) are advocated as quantitative measures of changes in road features on safety. However, in many situations, there are no CMFs in the literature to predict the safety impact of changing particular road features. An important example of these road features is sight distance restriction on horizontal curves. A mechanism for risk measurement has been proposed in earlier work to assist designers in comparing the safety impact of different deviations from sight distance requirements. This paper attempts to answer the questions as to whether it is possible to reduce overall risk and achieve consistency in such reduction without demanding wider right-of-way. This problem was formulated in a multi-objective optimization framework. Following this methodology, it was possible to achieve an average reduction in risk of 25% on the nine critical cross-sections. This reduction in risk was achieved without demanding wider right-of-way and without creating measurable increase in expected collision frequency due to independent re-dimensioning of different geometric elements. On theoretical grounds, this paper represents another step into the direction of developing fully probabilistic geometric design standards. On practical grounds, this paper provides an important decision mechanism that enables the efficient use of available right-of-way for new highway construction. Case studies in this paper have been applied on a major highway development in British Columba, Canada.     

Dynamic behaviour of Cd2+ adsorption in equilibrium batch studies by CaCO3 −-rich Corbicula fluminea shell

This work presents the structural and adsorption properties of the CaCO₃ ^?-rich Corbicula fluminea shell as a natural and economic adsorbent to remove Cd ions from aqueous solutions under batch studies. Experiments were conducted with different contact times, various initial concentrations, initial solution pH and serial biosorbent dosage to examine the dynamic characterization of the adsorption and its influence on Cd uptake capacity. The characterization of the C. fluminea shell using SEM/EDX revealed that the adsorbent surface is mostly impregnated by small particles of potentially calcium salts. The dominant Cd adsorption mechanism is strongly pH and concentration dependent. A maximum Cd removal efficiency of 96.20 % was obtained at pH 7 while the optimum adsorbent dosage was observed as 5 g/L. The Langmuir isotherm was discovered to be more suitable to represent the experimental equilibrium isotherm results with higher correlation coefficients (R ²?>?0.98) than Freundlich (R ²?<?0.97).The correlation coefficient values (p?<?0.01) indicated the superiority of the Langmuir isotherm over the Freundlich isotherm.     

Pollution levels of thiobencarb, propanil, and pretilachlor in rice fields of the muda irrigation scheme, Kedah, Malaysia

The purpose of this study was to investigate the potential risk of pretilachlor, thiobencarb, and propanil pollutants in the water system of the rice fields of the Muda area. The study included two areas that used different irrigation systems namely non-recycled (N-RCL) and recycled (RCL) water. Regular water sampling was carried out at the drainage canals during the weeding period from September to October 2006 in the main season of 2006/2007 and April-May 2007 in off season of 2007. The herbicides were extracted by the solid-phase extraction method and identified using a GC-ECD. Results showed that the procedure for identification of the three herbicides was acceptable based on the recovery test values, which ranged from 84.1% to 96.9%. A wide distribution pattern where more than 79% of the water samples contained the herbicide pollutants was observed at both the areas where N-RCL and RCL water was supplied for the two seasons. During September to October 2006, high weedicide residue concentration was observed at the N-RCL area and it ranged from 0.05 to 1.00 μg/L for pretilachlor and propanil and 10-25 μg/L for thiobencarb. In the case of the area with RCL water, the weedicide residue ranged from 1 to 5 μg/L for pretilachlor and propanil and 10-25 μg/L for thiobencarb. The highest residue level reached was 25-50, 50-100, and 100-200 μg/L for pretilachlor, propanil, and thiobencarb, respectively. During April to May 2007, high residue concentration frequently occurred at the area supplied with N-RCL irrigation water and it ranged from 0.05 to 1.00, 10 to 25, and 25 to 50 μg/L for pretilachlor, propanil, and thiobencarb, respectively. The highest residue level reached was 25-50 μg/L for pretilachlor and 100-200 μg/L for propanil and thiobencarb. There was an accelerated increase in the concentration of the herbicide residues, with the maximum levels reached at the early period of weedicide application, followed by a sharp decrease after the rice fields were completely covered with the rice crop. During the main season of 2006/2007, the concentration of propanil residue gradually rose, although that of the other herbicides declined.     

Identification of naphthalene metabolism by white rot fungus Armillaria sp. F022

Armillaria sp. F022, a white rot fungus isolated from tropical rain forest (Samarinda, Indonesia) was used to biodegrade naphthalene in cultured medium. Transformation of naphthalene by Armillaria sp. F022 which is able to use naphthalene, a two ring-polycyclic aromatic hydrocarbon (PAH) as a source of carbon and energy was investigated. The metabolic pathway was elucidated by identifying metabolites, biotransformation studies and monitoring enzyme activities in cell-free extracts. The identification of metabolites suggests that Armillaria sp. F022 initiates its attack on naphthalene by dioxygenation at its C-1 and C-4 positions to give 1,4-naphthoquinone. The intermediate 2-hydroxybenzaldehyde and salicylic acid, and the characteristic of the meta-cleavage of the resulting diol were identified in the long-term incubation. A part from typical metabolites of naphthalene degradation known from mesophiles, benzoic acid was identified as the next intermediate for the naphthalene pathway of this Armillaria sp. F022. Neither phthalic acid, catechol and cis,cis-muconic acid metabolites were detected in culture extracts. Several enzymes (manganese peroxidase, lignin peroxidase, laccase, 1,2-dioxygenase and 2,3-dioxygenase) produced by Armillaria sp. F022 were detected during the incubation.     

Virtual water trade in industrial products: evidence from Malaysia

Virtual water embodied in international trade is equivalent to nearly one-third of global water withdrawal, confirming that trade plays a significant role in redistributing global water resources. This paper extends a virtual water analysis by measuring the extent to which virtual water embodied in traded industrial products affects the distribution of global virtual water. The distribution of global virtual water can be improved if trade in industrial products promotes virtual water outflows from water-abundant to water-scarce countries. Analyses were performed using an input–output model that can decompose water consumption into domestic demand and exports by destinations of trade. Focusing on Malaysia, the results indicate that trade in industrial products between Malaysia and its main trading partners have a limited capacity to improve the distribution of global virtual water. This limitation can be due to two reasons. Firstly, exports of Malaysian industrial products are mainly driven by less water-intensive sectors. Therefore, the amount of virtual water that outflows into other countries is also low. Secondly, trade in Malaysian industrial products largely involves water flows with other water-abundant countries. Only several water-scarce countries benefit from virtual water trade in industrial products with Malaysia, namely the Netherlands, Australia and China.     

Effect of Curing Temperature on Mechanical Properties of Bio-phenolic/Epoxy Polymer Blends

Journal of Polymers and the Environment - Nowadays, researchers continue studies for alternative materials to replace the redundant petroleum-based products. The combination of various polymer...