Risk-optimal highway design: Methodology and case studies

Highway geometric design in mountainous areas has been a typical challenge. The combination of short horizontal curves and restricted right-of-way is a common ground for contemplating design exception in British Columbia, Canada. In practice, collision modification factors (CMFs) are advocated as quantitative measures of changes in road features on safety. However, in many situations, there are no CMFs in the literature to predict the safety impact of changing particular road features. An important example of these road features is sight distance restriction on horizontal curves. A mechanism for risk measurement has been proposed in earlier work to assist designers in comparing the safety impact of different deviations from sight distance requirements. This paper attempts to answer the questions as to whether it is possible to reduce overall risk and achieve consistency in such reduction without demanding wider right-of-way. This problem was formulated in a multi-objective optimization framework. Following this methodology, it was possible to achieve an average reduction in risk of 25% on the nine critical cross-sections. This reduction in risk was achieved without demanding wider right-of-way and without creating measurable increase in expected collision frequency due to independent re-dimensioning of different geometric elements. On theoretical grounds, this paper represents another step into the direction of developing fully probabilistic geometric design standards. On practical grounds, this paper provides an important decision mechanism that enables the efficient use of available right-of-way for new highway construction. Case studies in this paper have been applied on a major highway development in British Columba, Canada.     

The impact of urban growth on regional air quality surrounding the Langat River Basin, Malaysia

Studies of air quality were carried out in the towns of Kajang, Nilai and Banting in the Langat River Basin, southern region of Kuala Lumpur to determine the status and trend of air quality. The determination of air quality was based on several parameters such as suspended solids with diameters less than 10???m (PM₁₀) and gaseous pollutants of sulphur dioxide (SO₂), nitrogen dioxide (NO₂), ozone (O₃), and carbon monoxide (CO). Primary concentration data of air pollutants were compiled through fieldwork studies and combined with secondary data obtained from the regular monitoring data as collected by Alam Sekitar Malaysia Sdn. Bhd. (ASMA) on behalf of Malaysian Department of Environment (DOE) at their stations in Kajang and Nilai. Results showed that the average concentrations of PM₁₀, SO₂, NO₂, O_3, and CO at all sampling stations were still below the permissible values recommended by the Malaysian DOE. The level of gaseous pollutants of NO₂, O_3, and CO was recorded at statistically higher levels (p?<?0.05) than values recorded at the control station at Pangsun Recreational Area. These pollutants were suspected to have originated mainly from exhaust systems of motor vehicles. Data for the years 1996 to 2006 as obtained from ASMA showed long-term air quality trends of increasing O₃ and NO₂ concentrations in Kajang whilst concentrations of PM₁₀ recorded at both Kajang and Nilai stations were mostly expected coming from transboundary sources especially biomass burning and the development activities around the study areas.     

Congenital sialoblastoma (embryoma) associated with premature centromere division and high level of alpha-fetoprotein

Sialoblastoma is a rare, locally aggressive, and potentially malignant perinatal salivary tumor that predominantly affects the parotid glands. To date, 29 cases of sialoblastoma have been reported. We report a further case of sialoblastoma diagnosed at 37 weeks of gestation presenting with novel findings that are the premature centromere division and a high level of alpha-fetoprotein. Copyright © 2005 John Wiley & Sons, Ltd.     

Distribution of heavy metal concentrations in the different soft tissues of the freshwater snail Pomacea insularum (D’Orbigny, 1839; Gastropoda), and sediments collected from polluted and unpolluted sites from Malaysia

Pomacea insularum were collected from polluted and unpolluted freshwater ecosystems in Malaysia. Besides the shells, the soft tissues were dissected and pooled into cephalic tentacle, foot, mantle, operculum, digestive tract, penial sac, lung sac, and remainder. These tissues were analyzed for the concentrations of Cu, Cd, Fe, Ni, and Zn. The present work resulted in three interesting findings. First, the concentrations of Cu, Cd, Fe, and Zn found in most of the different parts of P. insularum collected from the polluted Juru River were significantly (P < 0.05) higher than those found in the snails from the other four sites. Second, positive and significant correlation coefficients were found for sediment-lung sac for Cd, Fe, and Zn while sediment-digestive tract for Cu. These correlation results indicated that lung sacs could reflect the environmental concentrations of Cd, Fe, and Zn, while the digestive tract could do the same for Cu. Third, the different concentrations of heavy metals found in the different parts indicated different metal regulation and binding sites in these organs. The significant correlation coefficients between different tissues indicated that they might be caused by similar metal regulation and sequestration. Based on the above findings, P. insularum are a potential biomonitor of Cd, Cu, Fe, and Zn pollution in freshwater ecosystems.     

Local community acceptance of the rare earth industry: the case of the Lynas Advanced Materials Plant (LAMP) in Malaysia

This paper provides a detailed analysis of the local community response to a newly installed rare earth (RE) refinery facility and the factors underlying its acceptance. House-to-house interviews, using structured questionnaire, were conducted in 2013 (N = 370). Results show that the community was divided into deciding whether they agreed with the presence of the facility, 41.36 % (for) and 41.62 % (against). The remaining fraction of the community was undecided, which made up 17.03 % of the total respondents. This paper identifies six significant predictors of risk acceptance: gender, education status, place of residence, Factor 1 (variables—perception of safety, concern on effects, and trust in the operators), Factor 2 (variables—social and individual benefits), and Factor 3 (variables—no confidence in government). This study gives insights on how the public respond to potential hazardous facilities and highlights the need for policy makers to consider public sentiment which can interfere with further expansion of the RE industry.     

Contamination of butyltin compounds in Malaysian marine environments

Concentration of butyltin compounds (BTs), including tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) and total tin (SigmaSn) were determined in green mussel (Perna viridis), 10 species of muscle fish and sediment from coastal waters of Malaysia. BTs were detected in all these samples ranging from 3.6 to 900 ng/g wet wt., 3.6 to 210 ng/g wet wt., and 18 to 1400 ng/g dry wt. for mussels, fish and sediments, respectively. The concentrations of BTs in several locations of this study were comparable with the reported values from some developed countries and highest among Asian developing nations. Considerable concentration of BTs in several locations might have ecotoxicological consequences and may cause concern to human health. The parent compound TBT was found to be highest than those of its degradation compounds, DBT and MBT, suggesting recent input of TBT to the Malaysian marine environment. Significant positive correlation (Spearman rank correlation: r2=0.82, P<0.0001) was found between BTs and SigmaSn, implying considerable anthropogenic input of butyltin compounds to total tin contamination levels. Enormous boating activities may be a major source of BTs in this country, although aquaculture activities may not be ignored.     

Use of waste plastic in concrete mixture as aggregate replacement

Industrial activities in Iraq are associated with significant amounts of non-biodegradable solid waste, waste plastic being among the most prominent. This study involved 86 experiments and 254 tests to determine the efficiency of reusing waste plastic in the production of concrete. Thirty kilograms of waste plastic of fabriform shapes was used as a partial replacement for sand by 0%, 10%, 15%, and 20% with 800 kg of concrete mixtures. All of the concrete mixtures were tested at room temperature. These tests include performing slump, fresh density, dry density, compressive strength, flexural strength, and toughness indices. Seventy cubes were molded for compressive strength and dry density tests, and 54 prisms were cast for flexural strength and toughness indices tests. Curing ages of 3, 7, 14, and 28 days for the concrete mixtures were applied in this work. The results proved the arrest of the propagation of micro cracks by introducing waste plastic of fabriform shapes to concrete mixtures. This study insures that reusing waste plastic as a sand-substitution aggregate in concrete gives a good approach to reduce the cost of materials and solve some of the solid waste problems posed by plastics.     

Fate of Chlorothalonil, Chlorpyrifos and Profenofos in a Vegetable Farm in cameron Highlands, Malaysia

The fate of chlorothalonil, chlorpyrifos and profenofos in sandy loam soil under tropical condition was studied in a vegetable plot in the Cameron Highlands, Malaysia. The plot was treated with chlorothalonil, chlorpyrifos and profenofos according to normal agricultural practices of the Cameron Highlands. Water (runoff and lysimeter), soil and bedload sediment samples were taken according to a sampling schedule. Residues in water, soil and bedload sediment samples were laboratory analysed to determine amount. Chlorothalonil residues were detected in the range of < 0.01–0.08 mg/kg in the soil, < 0.01–0.02 ng/mL in the leachate, < 0.01–0.02 ng/mL in the runoff and < 0.01–0.11mg/kg in the sediment. Field studies of chlorpyrifos showed residue levels of < 0.01–0.06 mg/kg in the soil, < 0.01–0.07 ng/mL in the leachate, < 0.01–0.08 ng/mL in the runoff and < 0.01–0.62 mg/kg in the sediment. Residue levels of profenofos were detected in the range of < 0.01–0.02 mg/kg in the soil, < 0.01–0.87 ng/mL in the leachate, < 0.01–0.08 ng/mL in the runoff and < 0.01–0.35 mg/kg in the sediment. The three pesticides dissipated rapidly, with DT50 (time for 50% loss) of less than two days. The study showed that these pesticides dissipated rapidly under the climatic conditions of the Cameron Highlands in Malaysia.     

Drivers of food waste generation and best practice towards sustainable food waste management in the hotel sector: a systematic review

Environmental Science and Pollution Research - The growing volumes of food globally are lost or wasted along the entire food chain. However, a high effort in investigating why food waste (FW)...     

Allozyme polymorphisms and heavy metal levels in the green-lipped mussel Perna viridis (Linnaeus) collected from contaminated and uncontaminated sites in Malaysia

It has been widely reported that heavy metal contamination in coastal waters can modify the allozyme profiles of marine organisms. Previous studies have recorded elevated metal concentrations in sediments and mussel tissues off Peninsular Malaysia. In the present study, horizontal starch gel electrophoresis was carried out to estimate the levels of allelic variation of the green-lipped mussel, Perna viridis, collected from one contaminated and three relatively uncontaminated sites off Peninsular Malaysia. Fourteen polymorphic loci were observed. In addition, the concentrations of cadmium, copper, lead, mercury and zinc were determined in the sediments and in the soft tissues of the mussels. Mussels from contaminated site, evidenced by high metal pollution indices (MPI) of the sediment and the mussel tissues, showed the highest percentage of polymorphic loci (78.6%), while those collected from the uncontaminated sites had lower MPI of the sediment and mussel tissue, and exhibited lower percentages of polymorphic loci (35.7-57.1%). The population from the contaminated site showed the highest excess of heterozygosity (0.289) when compared to that of the populations from the three uncontaminated sites (0.108-0.149). Allozyme frequencies at the phosphoglucomutase (PGM; E.C. 2.7.5.1) locus also differed between the contaminated and uncontaminated populations. Previous studies have shown that exposure to heavy metals can select or counter-select for particular alleles at this locus. The present results suggest that allozyme polymorphism in P. viridis is a potential biomonitoring tool for heavy metal contamination but further validation is required.