Lead pollution in East Trinidad resulting from lead recycling and smelting activities

Several problems of acute lead poisoning in children have been identified over the past three years in Trinidad. In all cases investigated so far, continual exposure to lead from battery recycling or from lead-smelter wastes have been found responsible. In East Trinidad, illicit dumping of lead wastes from such sources has resulted in several sites becoming heavily contaminated. Some of these sites are in environmentally sensitive areas, including rivers and wetlands, and require urgent remedial action. Results of monitoring studies at several of these sites show lead levels as high as 75% by weight. The potential for surface and ground water contamination exists, as evidenced by leaching of lead into surrounding areas.     

Biomass of Speckled Alder on an Air-Polluted Mountain Site and its Response to Fertilization

The article summarizes outcomes of a biomass study conducted in a young speckled alder plantation on a cold mountain site. At this location, the previously existing old forest was clear felled because of damage from air pollution, and present-day surface humus is in need of restoration. The intention of this study was to quantify the biomass and nutrients accumulated by alders and their components and assess whether the initial fertilization resulted in increased biomass production and nutrient accumulation in the biomass. Besides the control, two fertilized treatments were installed. In the surface treatment (SUT), the amendment was applied as a base dressing in small circles around trees. In the planting-hole treatment (PHT), the amendment was incorporated into soil inside the planting holes. Five growth seasons after planting and fertilization, six alders from each treatment were harvested including roots. Their biomass was quantified and analyzed for macroelements. The greatest pool of dry mass (DM) was branches in the control and stem wood in the fertilized treatments. The greatest pools of macroelements were leaves and branches. The most pronounced effects of fertilization were recorded in the DM and consequently in the absolute quantities of nutrients. The DM of an average tree in the control, SUT, and PHT was 85, 226, and 231 g, respectively. The absolute contents of nutrients per tree in the fertilized treatments showed the following increases, as compared with the control: (N) 2.5–2.6 times; (P) 1.6–2.4 times; (K) 1.8–2.1 times; and (Mg) 1.8–2.0 times, respectively. Speckled alder responded positively to fertilization.     

Explosibility of polyamide and polyester fibers

The current research is aimed at investigating the explosion behavior of hazardous materials in relation to aspects of particulate size. The materials of study are flocculent (fibrous) polyamide 6.6 (nylon) and polyester (polyethylene terephthalate). These materials may be termed nontraditional dusts due to their cylindrical shape which necessitates consideration of both particle diameter and length. The experimental work undertaken is divided into two main parts. The first deals with the determination of deflagration parameters for polyamide 6.6 (dtex 3.3) for different lengths: 0.3 mm, 0.5 mm, 0.75 mm, 0.9 mm and 1 mm; the second involves a study of the deflagration behavior of polyester and polyamide 6.6 samples, each having a length of 0.5 mm and two different values of dtex, namely 1.7 and 3.3. (Dtex or decitex is a unit of measure for the linear density of fibers. It is equivalent to the mass in grams per 10,000 m of a single filament, and can be converted to a particle diameter.) The explosibility parameters investigated for both flocculent materials include maximum explosion pressure (P_max), size-normalized maximum rate of pressure rise (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE) and minimum ignition temperature (MIT). ASTM protocols were followed using standard dust explosibility test equipment (Siwek 20-L explosion chamber, MIKE 3 apparatus and BAM oven). Both qualitative and quantitative analyses were undertaken as indicated by the following examples. Qualitative observation of the post-explosion residue for polyamide 6.6 indicated a complex interwoven structure, whereas the polyester residue showed a shiny, melt-type appearance. Quantitatively, the highest values of P_max and K_St were obtained at the shortest length and finest dtex for a given material. For a given length, polyester displayed a greater difference in P_max and K_St at different values of dtex than polyamide 6.6. Long ignition delay times were observed in the BAM oven (MIT measurements) for polyester, and video framing of explosions in the MIKE 3 apparatus (MIE measurements) enabled observation of secondary ignitions caused by flame propagation after the initial ignition occurring at the spark electrodes.     

Foraging activity and resource use by three parrotfish species at Fernando de Noronha Archipelago, tropical West Atlantic

Parrotfishes are important components of the herbivore and detritivore guilds of tropical and subtropical reefs. Most of parrotfish species are protogynous hermaphrodites that change colour and sex, from initial phase females or males (IP) to terminal phase males (TP). We studied the foraging behaviour of Sparisoma amplum, S. axillare and S. frondosum, three syntopic scarids on the rocky reefs of Fernando de Noronha Archipelago, Tropical West Atlantic. The three parrotfish species differed in food selection and preference, but IP and TP individuals of the same species preferred the same food types, except for S. amplum. Feeding rates of IP individuals were higher than those of TP individuals, but the distribution of feeding frequencies throughout the day of IP and TP individuals of the same species was similar. IP individuals had higher feeding rates than TP ones, which seems related to the fact that TP individuals spend a large amount of time patrolling their territories and chasing away conspecific individuals at the study site. The general foraging pattern we found for S. amplum, S. axillare and S. frondosum is similar to patterns found for other parrotfish species in the Western Atlantic.     

INTERACTION BETWEEN RIPARIAN VEGETATION,WATER TEMPERATURE,AND SALMONID HABITAT IN THE TUCANNON RIVER1

ABSTRACT: This analysis relates physical-process, ecological, and economic models to: (1) analyze the instream water temperatures with respect to existing and proposed riparian vegetation under natural conditions; (2) use these water temperatures to determine salmon and steel-head fish populations that were based upon actual field count and known temperature preference data; and (3) determine the economic worth based upon the estimated carrying capacity of the river, the estimated number of return spawners, and the economic value of commercially caught and sport-caught salmon and steelhead. The economic evaluations are in accordance with procedures outlined by the U.S. Water Resources Council (1983).     

Water-soluble gases as partitioning tracers to investigate the pore volume-transmissivity correlation in a fracture

Hydraulically equivalent fractures may show striking differences when a gas-migration experiment is performed because of the different correlations between transmissivity, pore volume and entry pressure. We numerically simulate gas migration between injection and extraction boreholes in a parallel plate fracture with a heterogeneous fault gouge, in a rough-walled fracture filled with homogeneous material, and in a rough-walled empty fracture. The parallel plate model and the empty model clearly show the existence of preferential paths; for high variance of the transmissivity field, gas flow takes place only in few discrete channels separated by water-saturated regions. In contrast, in the fracture filled with homogeneous fault gouge, the gas saturation is continuous and more uniformly distributed. It appears a fundamental issue to be able to discriminate in situ among conceptual models that can yield such a different gas-saturation distribution. As in practice, the saturation distribution cannot be directly observed, tracer experiments are performed to characterize a fracture. For these reasons, we simulate the transport of tracers, which are added to the gas phase as soon as quasi-steady saturation distribution and extraction rate are achieved, and we compare the breakthrough curves obtained assuming different models. Our numerical simulations suggest that discrimination among the models on the basis of single-tracer tests is unlikely. A better tool to investigate fracture properties is provided by a gas-tracer test, in which a cocktail of gases with different water solubility is employed. These gases behave as partitioning tracers and allow us to estimate the gas saturation in the fracture. Indeed, by comparison of the residence-time distributions of different gases, we are able to compute a streamline effective saturation, which is an excellent estimate of fracture saturation. In addition, the streamline effective saturation curve contains information that is useful to identify the conceptual model that more likely applies to the fracture.     

Assessing the risk of ignition in the Russian far east within a modeling framework of fire threat.

The forests of high biological importance in the Russian Far East (RFE) have been experiencing increasing pressure from growing demands for natural resources under the changing economy of post-Soviet Russia. This pressure is further amplified by the rising threat of large and catastrophic fire occurrence, which threatens both the resources and the economic potential of the region. In this paper we introduce a conceptual Fire Threat Model (FTM) and use it to provide quantitative assessment of the risk of ignition in the Russian Far East. The remotely sensed data driven FTM is aimed at evaluating potential wildland fire occurrence and its impact and recovery potential for a given resource. This model is intended for use by resource managers to assist in assessing current levels of fire threat to a given resource, projecting the changes in fire threat under changing climate and land use, and evaluating the efficiency of various management approaches aimed at minimizing the fire impact. Risk of ignition (one of the major uncertainties within fire threat modeling) was analyzed using the MODIS active fire product. The risk of ignition in the RFE is shown to be highly variable in spatial and temporal domains. However, the number of ignition points is not directly proportional to the amount of fire occurrence in the area. Fire ignitions in the RFE are strongly linked to anthropogenic activity (transportation routes, settlements, and land use). An increase in the number of fire ignitions during summer months could be attributed to (1) disruption of the summer monsoons and subsequent changes in fire weather and (2) an increase in natural sources of fire ignitions.     

Derivation of unit and flood hydrographs using a gis

A geographic information system (GIS) supporting a flood hydrograph prediction software package is described. The hydrograph prediction method is based on the convolution of excess rainfall with a synthetic unit hydrograph, derived by the Soil Conservation Service runoff curve number and a regional dimensionless unit hydrograph method, respectively. The GIS uses a raster method to store the following data: land use and land cover, soil type, rainfall intensity-frequency-duration statistics, runoff curve numbers (CN), regional dimensionless unit hydrograph, and regional lag-time relationship. The GIS has also the capability of computing a number of watershed and hydrologic parameters required for predictions, such as a watershed average rainfall and CN value, area, centroid, stream length etc. Most of the data for such computations are input from a digitizer. Substantial time and cost savings are possible once the data base has been created. Application of the system is illustrated by an example predicting flood frequency curves for selected watersheds in Alberta's Rocky Mountain foothills, Canada.