Conventional, microwave, and ultrasound sequential extractions for the fractionation of metals in sediments within the Petrochemical Industry, Serbia

In this paper, the main objective was fractionation of Cd, Cu, Ni, Pb, Zn, Ca, Fe, and K in certificate material and sediment samples gathered from and around the Petrochemical Industry using the conventional, microwave and ultrasonic sequential extraction. Microwave oven and ultrasound bath were used as an energy source for achieving faster extraction. Additional heating and boiling of samples were avoided by using lower power and shorter time for microwave and ultrasound extraction. Precision and accuracy of procedure were evaluated by using certificate material (BCR701). Acceptable accuracy of metals (87.0–111.3 %) was achieved for all three-step sequential of conventional extraction protocol. An accuracy of the fourth step has been verified with two certificate materials: BCR143R and 146R. The range of total extracted metal concentrations from sediments was similar for all three extraction techniques. A significant high percentage of Cd, Cu, and Zn were obtained after extraction of the exchangeable and acid soluble sediment fraction. Principal component analysis of values obtained after determination of risk assessment code using conventional and ultrasound sequential extraction show similarity of these values. Accuracy, recovery, and risk assessment code values imply that ultrasound sequential extraction is a more suitable, accelerated sequential extraction procedure (30 min per extraction step) than microwave extraction in applied conditions.     

The fate and importance of organics in drinking water treatment: a review

In the pioneer days, the main driving forces for research of organics in drinking water treatment (DWT) were human health risks and optimisation of technology. The focus was on natural organic matter (NOM) structure, disinfection by-products (DBPs) formation, NOM removal by means of coagulation, adsorption, and oxidation, and development of the most efficient water treatment trains. Surprisingly, after decades of research, rapid development of analytical techniques and progress in risk assessment, the same driving forces are still in the limelight — although the topics have changed slightly. The attention switched from trihalomethanes to a new generation of DBPs. The definition of hydrophilic/hydrophobic NOM depends on the technique used for characterisation. It has become evident that numerous organic compounds can threaten water supply sources. Some of them had been ignored or overlooked in the past, but have recently been detected by advanced analytical tools even in drinking water. Prioritisation becomes priority per se. As far as processes are concerned, mainstream research has been following three lines: fouling mechanisms, application of hybrid processes and interactions between synthetic organic chemicals, other water constituents and materials used in DWT. Significant development has been made in membrane technology. This paper presents a broad overview of the recent organics research. Although the state-of-the-art technologies seem to have an answer to each and every question raised, it is still necessary to deal with specific problems on a case-by-case basis mainly due to the unique nature of NOM and different xenobiotics that may appear in various types of waters. In the end, human health risk, which derives from the presence/absence of organics, is only the tip of the iceberg — underneath lies a whole new universe — the socio-economic aspect of water treatment and quality that deserves much more attention.     

Assessing the risk of ignition in the Russian far east within a modeling framework of fire threat.

The forests of high biological importance in the Russian Far East (RFE) have been experiencing increasing pressure from growing demands for natural resources under the changing economy of post-Soviet Russia. This pressure is further amplified by the rising threat of large and catastrophic fire occurrence, which threatens both the resources and the economic potential of the region. In this paper we introduce a conceptual Fire Threat Model (FTM) and use it to provide quantitative assessment of the risk of ignition in the Russian Far East. The remotely sensed data driven FTM is aimed at evaluating potential wildland fire occurrence and its impact and recovery potential for a given resource. This model is intended for use by resource managers to assist in assessing current levels of fire threat to a given resource, projecting the changes in fire threat under changing climate and land use, and evaluating the efficiency of various management approaches aimed at minimizing the fire impact. Risk of ignition (one of the major uncertainties within fire threat modeling) was analyzed using the MODIS active fire product. The risk of ignition in the RFE is shown to be highly variable in spatial and temporal domains. However, the number of ignition points is not directly proportional to the amount of fire occurrence in the area. Fire ignitions in the RFE are strongly linked to anthropogenic activity (transportation routes, settlements, and land use). An increase in the number of fire ignitions during summer months could be attributed to (1) disruption of the summer monsoons and subsequent changes in fire weather and (2) an increase in natural sources of fire ignitions.     

Quantification of sources of PCBs to the atmosphere in urban areas: A comparison of cities in North America, Western Europe and former Yugoslavia

We present estimated emission source strengths of seven polychlorinated biphenyl (PCB) congeners for Banja Luka, a city that was affected by the civil war in Bosnia and Hercegovina (former Yugoslavia) in the 1990s. These emission estimates are compared to PCB emission rates estimated for the cities of Zurich, Switzerland, and Chicago, USA using an approach that combines multimedia mass balance modeling and measurement data. Our modeled per-capita emission estimates for Banja Luka are lower by a factor of ten than those for Zurich and Chicago, which are similar. This indicates that the sources of PCB emissions in Banja Luka are likely to be weaker than in the Western European and North American cities which show relatively high PCB emissions. Our emission rates from the three cities agree within a factor of ten with emission estimates from a global PCB emission inventory derived from production and usage estimates and emission factors.     

Comparing decadal responses of whole-watershed manipulations at the Bear Brook and Fernow experiments

The Bear Brook Watershed in Maine (BBWM), USA, and the Fernow Experimental Forest in West Virginia, USA, represent unique, long-term, paired, whole watershed, experimental manipulations focusing on the effects of nitrogen (N) and sulfur (S) deposition on temperate forests. Both watersheds began whole-ecosystem additions of N and S as (NH₄)₂SO₄ in the fall of 1989, and both are entering their third decade of chronic enrichment of the treated watersheds, while the reference watersheds offer unique opportunities to evaluate forest watershed responses to recovery. Differences between BBWM and Fernow in the history of atmospheric deposition, soil properties, and forest composition all contribute to different response trajectories in stream chemical exports over time. The four watersheds represent a spectrum of N enrichment and retention, ranging from ≈98% N retention in the reference watershed in Maine, to ≈20% N retention in the treated watershed in West Virginia. Despite these differences, there is evidence that mechanisms of response in base cation leaching and other processes are similar among all four watersheds. In both cases, the history to date of two decades of research and monitoring has provided new insights into ecosystem response not evident in more traditional short-term research.     

Methane Emissions from Large Dams as Renewable Energy Resources: A Developing Nation Perspective

By means of a theoretical model, bootstrap resampling and data provided by the International Commission On Large Dams (ICOLD (2003) World register of dams. http://www.icold-cigb.org) we found that global large dams might annually release about 104 ± 7.2 Tg CH₄ to the atmosphere through reservoir surfaces, turbines and spillways. Engineering technologies can be implemented to avoid these emissions, and to recover the non-emitted CH₄ for power generation. The immediate benefit of recovering non-emitted CH₄ from large dams for renewable energy production is the mitigation of anthropogenic impacts like the construction of new large dams, the actual CH₄ emissions from large dams, and the use of unsustainable fossil fuels and natural gas reserves. Under the Clean Development Mechanism of the Kyoto Protocol, such technologies can be recognized as promising alternatives for human adaptations to climate change concerning sustainable power generation, particularly in developing nations owning a considerable number of large dams. In view of novel technologies to extract CH₄ from large dams, we estimate that roughly 23 ± 2.6, 2.6 ± 0.2 and 32 ± 5.1 Tg CH₄ could be used as an environmentally sound option for power generation in Brazil, China and India, respectively. For the whole world this number may increase to around 100 ± 6.9 Tg CH₄.     

Effects of life-history traits on parasitism in a monogamous mammal, the eastern rock sengi (Elephantulus myurus)

The distribution of parasites is often characterised by substantial aggregation with a small proportion of hosts harbouring the majority of parasites. This pattern can be generated by abiotic and biotic factors that affect hosts and determine host exposure and susceptibility to parasites. Climate factors can change a host’s investment in life-history traits (e.g. growth, reproduction) generating temporal patterns of parasite aggregation. Similarly, host age may affect such investment. Furthermore, sex-biased parasitism is common among vertebrates and has been linked to sexual dimorphism in morphology, behaviour and physiology. Studies exploring sex-biased parasitism have been almost exclusively conducted on polygynous species where dimorphic traits are often correlated. We investigated the effects of season and life-history traits on tick loads of the monogamous eastern rock sengi (Elephantulus myurus). We found larger tick burdens during the non-breeding season possibly as a result of energetic constraints and/or climate effects on the tick. Reproductive investment resulted in increased larval abundance for females but not males and may be linked to sex-specific life-history strategies. The costs of reproduction could also explain the observed age effect with yearling individuals harbouring lower larval burdens than adults. Although adult males had the greatest larval tick loads, host sex appears to play a minor role in generating the observed parasite heterogeneities. Our study suggests that reproductive investment plays a major role for parasite patterns in the study species.     

Structural Differences Between Lignin Model Polymers Synthesized from Various Monomers

In a plant cell wall, lignin is synthesized from several monomeric precursors, combined in various ratios. The variation in monomer type and quantity enables multifunctional role of lignin in plants. Thus, it is important to know how different combinations of lignin monomers impact variability of bond types and local structural changes in the polymer. Lignin model polymers are a good model system for studies of relation between variations of the starting monomers and structural variations within the polymer. We synthesized lignin model polymers from three monomers, CF??based on coniferyl alcohol and ferulic acid in monomer proportions 5:1 and 10:1 (w/w), CP??based on coniferyl alcohol and p-coumaric acid in proportion 10:1 (w/w) and CA??based on pure coniferyl alcohol. We studied structural modifications in the obtained polymers, by combining fluorescence microscopy and spectroscopy, FT-IR and Raman spectroscopy, in parallel with determination of polymers?? molecular mass distribution. The differences in the low M _w region of the distribution curves of the 10:1 polymers in comparison with the CA polymer may be connected with the increased content of C=C bonds and decreased content of condensed structures, as observed in FT-IR spectra and indicated by the analysis of fluorescence spectra. The 5:1 CF polymer contains a different type of structure in comparison with the 10:1 CF polymers, reflected in its simpler M _w distribution, higher homogeneity of the fluorescence emitting structures and in the appearance of a new high-wavelength emission component. We propose that this component may originate from ??-conjugated chains, which are longer in this polymer. The results are a contribution to the understanding of the involvement of structural variations of lignin polymers in the cell wall structural plasticity.     

Toxicity mitigation and solidification of municipal solid waste incinerator fly ash using alkaline activated coal ash

Municipal solid waste (MSW) incineration is a common and effective practice to reduce the volume of solid waste in urban areas. However, the byproduct of this process is a fly ash (IFA), which contains large quantities of toxic contaminants. The purpose of this research study was to analyze the chemical, physical and mechanical behaviors resulting from the gradual introduction of IFA to an alkaline activated coal fly ash (CFA) matrix, as a mean of stabilizing the incinerator ash for use in industrial construction applications, where human exposure potential is limited. IFA and CFA were analyzed via X-ray fluorescence (XRF), X-ray diffraction (XRD) and Inductive coupled plasma (ICP) to obtain a full chemical analysis of the samples, its crystallographic characteristics and a detailed count of the eight heavy metals contemplated in US Title 40 of the Code of Federal Regulations (40 CFR). The particle size distribution of IFA and CFA was also recorded. EPA's Toxicity Characteristic Leaching Procedure (TCLP) was followed to monitor the leachability of the contaminants before and after the activation. Also images obtained via Scanning Electron Microscopy (SEM), before and after the activation, are presented. Concrete made from IFA, CFA and IFA-CFA mixes was subjected to a full mechanical characterization; tests include compressive strength, flexural strength, elastic modulus, Poisson's ratio and setting time. The leachable heavy metal contents (except for Se) were below the maximum allowable limits and in many cases even below the reporting limit. The leachable Chromium was reduced from 0.153 down to 0.0045 mg/L, Arsenic from 0.256 down to 0.132 mg/L, Selenium from 1.05 down to 0.29 mg/L, Silver from 0.011 down to .001 mg/L, Barium from 2.06 down to 0.314 mg/L and Mercury from 0.007 down to 0.001 mg/L. Although the leachable Cd exhibited an increase from 0.49 up to 0.805 mg/L and Pd from 0.002 up to 0.029 mg/L, these were well below the maximum limits of 1.00 and 5.00 mg/L, respectively.     

The Lost Creek Fire: managing social relations under disaster conditions

This paper examines some of the social processes associated with disaster conditions. Utilising an asset‐based perspective of community capacity, it focuses on four types of normative systems to interpret the ability of communities to manage disasters through market‐, bureaucratic‐, associative‐, and communal‐based norms. Drawing on experience of a wildfire in the Crowsnest Pass region of southwest Alberta, Canada, in 2003, the tensions and compatibilities among these normative systems are evaluated through interviews with 30 community leaders. The results confirm the contributions of all types of social capital to resiliency, the necessity for rapid use of place‐based knowledge, and the importance of communication among all types and levels of agents. In addition, they point to the value of identifying and managing potential conflicts among the normative systems as a means to maximising their contributions. The integration of local networks and groups into the more general disaster response minimised the impacts on health and property.