Application of the comet assay and detection of DNA damage in haemocytes of medicinal leech affected by aluminium pollution: A case study

This report describes an investigation of genotoxic effects in medicinal leech (Hirudo verbana) exposed to water and sediment of Lake Njivice (Krk Island, Croatia) contaminated by aluminium compounds. The levels of primary DNA damage in leech haemocytes and loss of DNA integrity caused by acute and chronic exposure to contaminated water and sediment were investigated using the alkaline comet assay. Genotoxic effects induced by acute exposure to contaminants were evaluated on leech haemocytes and blood cells of fish and mouse treated ex vivo. The effects of chronic exposure were assessed on haemocytes sampled from an animal kept under laboratory conditions on contaminated water and sediment for 180 days. The results indicate the DNA damaging potential of aluminium compounds present in an excess amount in tested samples.     

Lead pollution in East Trinidad resulting from lead recycling and smelting activities

Several problems of acute lead poisoning in children have been identified over the past three years in Trinidad. In all cases investigated so far, continual exposure to lead from battery recycling or from lead-smelter wastes have been found responsible. In East Trinidad, illicit dumping of lead wastes from such sources has resulted in several sites becoming heavily contaminated. Some of these sites are in environmentally sensitive areas, including rivers and wetlands, and require urgent remedial action. Results of monitoring studies at several of these sites show lead levels as high as 75% by weight. The potential for surface and ground water contamination exists, as evidenced by leaching of lead into surrounding areas.     

Toxicity mitigation and solidification of municipal solid waste incinerator fly ash using alkaline activated coal ash

Municipal solid waste (MSW) incineration is a common and effective practice to reduce the volume of solid waste in urban areas. However, the byproduct of this process is a fly ash (IFA), which contains large quantities of toxic contaminants. The purpose of this research study was to analyze the chemical, physical and mechanical behaviors resulting from the gradual introduction of IFA to an alkaline activated coal fly ash (CFA) matrix, as a mean of stabilizing the incinerator ash for use in industrial construction applications, where human exposure potential is limited. IFA and CFA were analyzed via X-ray fluorescence (XRF), X-ray diffraction (XRD) and Inductive coupled plasma (ICP) to obtain a full chemical analysis of the samples, its crystallographic characteristics and a detailed count of the eight heavy metals contemplated in US Title 40 of the Code of Federal Regulations (40 CFR). The particle size distribution of IFA and CFA was also recorded. EPA's Toxicity Characteristic Leaching Procedure (TCLP) was followed to monitor the leachability of the contaminants before and after the activation. Also images obtained via Scanning Electron Microscopy (SEM), before and after the activation, are presented. Concrete made from IFA, CFA and IFA-CFA mixes was subjected to a full mechanical characterization; tests include compressive strength, flexural strength, elastic modulus, Poisson's ratio and setting time. The leachable heavy metal contents (except for Se) were below the maximum allowable limits and in many cases even below the reporting limit. The leachable Chromium was reduced from 0.153 down to 0.0045 mg/L, Arsenic from 0.256 down to 0.132 mg/L, Selenium from 1.05 down to 0.29 mg/L, Silver from 0.011 down to .001 mg/L, Barium from 2.06 down to 0.314 mg/L and Mercury from 0.007 down to 0.001 mg/L. Although the leachable Cd exhibited an increase from 0.49 up to 0.805 mg/L and Pd from 0.002 up to 0.029 mg/L, these were well below the maximum limits of 1.00 and 5.00 mg/L, respectively.     

Structural Differences Between Lignin Model Polymers Synthesized from Various Monomers

In a plant cell wall, lignin is synthesized from several monomeric precursors, combined in various ratios. The variation in monomer type and quantity enables multifunctional role of lignin in plants. Thus, it is important to know how different combinations of lignin monomers impact variability of bond types and local structural changes in the polymer. Lignin model polymers are a good model system for studies of relation between variations of the starting monomers and structural variations within the polymer. We synthesized lignin model polymers from three monomers, CF??based on coniferyl alcohol and ferulic acid in monomer proportions 5:1 and 10:1 (w/w), CP??based on coniferyl alcohol and p-coumaric acid in proportion 10:1 (w/w) and CA??based on pure coniferyl alcohol. We studied structural modifications in the obtained polymers, by combining fluorescence microscopy and spectroscopy, FT-IR and Raman spectroscopy, in parallel with determination of polymers?? molecular mass distribution. The differences in the low M _w region of the distribution curves of the 10:1 polymers in comparison with the CA polymer may be connected with the increased content of C=C bonds and decreased content of condensed structures, as observed in FT-IR spectra and indicated by the analysis of fluorescence spectra. The 5:1 CF polymer contains a different type of structure in comparison with the 10:1 CF polymers, reflected in its simpler M _w distribution, higher homogeneity of the fluorescence emitting structures and in the appearance of a new high-wavelength emission component. We propose that this component may originate from ??-conjugated chains, which are longer in this polymer. The results are a contribution to the understanding of the involvement of structural variations of lignin polymers in the cell wall structural plasticity.     

The Lost Creek Fire: managing social relations under disaster conditions

This paper examines some of the social processes associated with disaster conditions. Utilising an asset‐based perspective of community capacity, it focuses on four types of normative systems to interpret the ability of communities to manage disasters through market‐, bureaucratic‐, associative‐, and communal‐based norms. Drawing on experience of a wildfire in the Crowsnest Pass region of southwest Alberta, Canada, in 2003, the tensions and compatibilities among these normative systems are evaluated through interviews with 30 community leaders. The results confirm the contributions of all types of social capital to resiliency, the necessity for rapid use of place‐based knowledge, and the importance of communication among all types and levels of agents. In addition, they point to the value of identifying and managing potential conflicts among the normative systems as a means to maximising their contributions. The integration of local networks and groups into the more general disaster response minimised the impacts on health and property.     

Quantification of sources of PCBs to the atmosphere in urban areas: A comparison of cities in North America, Western Europe and former Yugoslavia

We present estimated emission source strengths of seven polychlorinated biphenyl (PCB) congeners for Banja Luka, a city that was affected by the civil war in Bosnia and Hercegovina (former Yugoslavia) in the 1990s. These emission estimates are compared to PCB emission rates estimated for the cities of Zurich, Switzerland, and Chicago, USA using an approach that combines multimedia mass balance modeling and measurement data. Our modeled per-capita emission estimates for Banja Luka are lower by a factor of ten than those for Zurich and Chicago, which are similar. This indicates that the sources of PCB emissions in Banja Luka are likely to be weaker than in the Western European and North American cities which show relatively high PCB emissions. Our emission rates from the three cities agree within a factor of ten with emission estimates from a global PCB emission inventory derived from production and usage estimates and emission factors.     

Environmental analysis of the production of natural cork stoppers in southern Europe (Catalonia – Spain)

The wine industry has developed greatly over recent years, and it could be stated that what was once a traditional industry has become a very productive and technical sector. One aspect that has not been studied until now is the cork stopper, despite the fact that most wine bottles are sealed with this product, and practically all corks are produced in the Iberian Peninsula.This study presents the environmental analysis of the production of natural cork stoppers, using life cycle assessment (LCA) methodology. The research was supported by data from four Catalan representative companies and all the stages involved in the production after the forest management have been taken into account. The purpose of this research was to provide reference data for the Catalan cork industrial sector (Northeast Spain), and also contribute to deciding which aspects of natural cork stopper production must be improved and further researched. Another objective of this research was to emphasise and demonstrate that LCA methodology could be an interesting tool for improving traditional industry, from a cleaner production perspective.Results could be used by other sector companies to analyse and compare themselves with in order to know if they could improve their production with the current available technology. Impact assessment results indicate that the manufacturing stage was the stage causing the greatest impact, but also an evaluation of the influence of the initial transport from the forest reveals that this stage could notably increase the impact when raw cork was moved from distant forests.     

Changes in mussel Mytilus galloprovincialis protein profile as a reaction of water pollution

In the present report the changes in mussels Mytilus galloprovincialis protein profile, as a reaction of water pollution, is presented. The antioxidant capacity was determined by the efficacy to scavenge the derived radical in mussel samples using the Trolox Equivalent Antioxidant Capacity (TEAC) assay. The highest percentage of inhibition was estimated in protein mussels from the dirty area (DM) in comparison with the clean samples (CM). The amounts of both zinc and copper determined by atomic spectroscopy were significantly higher in the protein mussels from the dirty than from the clean areas (P<0.05). Fourier Transform Infrared (FT-IR) spectroscopy and fluorescence revealed specific qualitative changes in secondary and tertiary structures of mussel proteins from the dirty area by the shift in the amides I and II positions and fluorescence intensity. Estimated temperature and enthalpy of denaturation in the protein mussels well correlated with fluorescence and spectroscopic measurements and showed the changes influenced by water pollution.