Assessment of the disposition of chiral polychlorinated biphenyls in female mdr 1a/b knockout versus wild-type mice using multivariate analyses

Polychlorinated biphenyls (PCBs) are present in the environment as complex mixtures, which make it challenging to identify PCB congeners that may be subject to active transport processes. Here we employ a transgenic mouse model in combination with multivariate analyses to investigate if chiral PCBs 91, 95, 132, 136, 149, 174, 176 and 183 are subject to active (enantioselective) transport by multidrug resistance (MDR) transporters. A synthetic PCB mixture containing these congeners was administered orally to female FVB or mdr1a/1b knockout mice. Due to the short half-life of chiral PCB congeners, mice were euthanized after 24 h and PCB concentrations and enantiomeric fractions were determined in selected tissues and excreta. Principal component analysis did not reveal differences between wild-type and mdr1a/1b knockout mice. However, Hotelling T²-test revealed significantly lower PCB concentrations and a more pronounced enantiomeric enrichment in the adipose tissue of mdr1a/1b knockout mice. These differences are due to higher body weights and higher fecal fat contents of mdr1a/1b knockout mice. Analysis of the enantiomeric fractions of PCBs 91, 95, 136, 149 and 174 showed a significant enantiomeric enrichment for all five congeners in wild-type and mdr1a/1b knockout mice. Overall, by studying a PCB mixture in a transgenic mouse model in combination with a multivariate data reduction approach, PCBs 91, 95, 136, 149 and 174 could be excluded as substrates of multidrug resistance transporters 1a/b.     

Use of the landfill water pollution index (LWPI) for groundwater quality assessment near the landfill sites

The purpose of the paper is to assess the groundwater quality near the landfill sites using landfill water pollution index (LWPI). In order to investigate the scale of groundwater contamination, three landfills (E, H and S) in different stages of their operation were taken into analysis. Samples of groundwater in the vicinity of studied landfills were collected four times each year in the period from 2004 to 2014. A total of over 300 groundwater samples were analysed for pH, EC, PAH, TOC, Cr, Hg, Zn, Pb, Cd, Cu, as required by the UE legal acts for landfill monitoring system. The calculated values of the LWPI allowed the quantification of the overall water quality near the landfill sites. The obtained results indicated that the most negative impact on groundwater quality is observed near the old Landfill H. Improper location of piezometer at the Landfill S favoured infiltration of run-off from road pavement into the soil-water environment. Deep deposition of the groundwater level at Landfill S area reduced the landfill impact on the water quality. Conducted analyses revealed that the LWPI can be used for evaluation of water pollution near a landfill, for assessment of the variability of water pollution with time and for comparison of water quality from different piezometers, landfills or time periods. The applied WQI (Water Quality Index) can also be an important information tool for landfill policy makers and the public about the groundwater pollution threat from landfill.     

Chemometric approach to evaluate element distribution in muscle,liver and fish bone of roach (Rutilus rutilus), silver bream (Blicca bjoerkna) and crucian carp (Carassius carassius) from Swarzędzkie Lake (Poland) using ICP-MS and FIAS-CVAAS techniques

The content of elements in fish tissues and organs from Swarz?dzkie Lake was investigated in order to evaluate the possible risk associated with their consumption by animals as well as humans. Samples of muscle, liver and fish bone of three fish species; roach (Rutilus rutilus), silver bream (Blicca bjoerkna) and crucian carp (Carassius carassius) were collected from seine catches undertaken as part of the biomanipulation of Swarz?dzkie Lake. Element concentration (Al, As, Cd, Co, Cr, Cu, Hg, Ni, Pb, Zn) was determined by inductively coupled plasma mass spectrometry (ICP-MS), with the exception of Hg where the flow injection analysis system cold vapour atomic absorption spectrometry (FIAS-CVAAS) was applied. The study indicated a large variation in the occurrence of the investigated elements in different parts of the fish body. The highest content of Al and Zn was stated in all fish organs for each fish species. The majority of the applied statistical and chemometric methods (e.g., PCA, CA) refer to roach since we had a large number of data for this species. The obtained results were assessed in terms of their accuracy and precision using certified reference material of Fish Muscle ERM BB422.     

The transfer of active ingredients of insecticides and fungicides from an orchard to beehives

This investigation was undertaken to determine whether active ingredients (AIs) of currently recommended plant protection products (PPPs) could be transferred to beehives from apple and pear trees. A field trial was carried out with apple trees of Ligol and Idared variety, and pear trees of Conference variety. For pest and diseases control of fungal origin, recommended PPPs were applied. Samples of flowers from the above-mentioned varieties of fruit trees, of bees, brood and honey from beehives located in their direct neighborhood were collected regularly and analyzed for the presence of lambda-cyhalothrin (an insecticide) and cyprodinil, captan, fluopyram, kresoxim-methyl, penthiopyrad and trifloxystrobin (fungicides). In samples of flowers of Ligol variety, fluopyram residues (on average 0.621 µg single flower^?1) were at the highest levels, whereas in samples of pear flowers of Conference variety, and in flowers of Idared variety, captan residues (on average, respectively, 0.705 and 165.7 µg single flower^?1). In samples of bees and honey, residues of five AIs were detected, and in brood six AIs, whereby in each case captan residues prevailed, respectively, up to 585.2, 51.52 and 126.5 µg kg^?1 bees and honey. In the honey, significantly larger residues of captan were found out than maximum residue level (MRL) for this AI – 103.04% MRL. In the case of any AI, the daily intake did not exceed 0.002% acceptable daily intake (ADI).     

Technologies for deodorization of malodorous gases

There is an increasing number of citizens’ complaints about odor nuisance due to production or service activity. High social awareness imposes pressure on entrepreneurs and service providers forcing them to undertake effective steps aimed at minimization of the effects of their activity, also with respect to emission of malodorous substances. The article presents information about various technologies used for gas deodorization. Known solutions can be included into two groups: technologies offering prevention of emissions, and methodological solutions that enable removal of malodorous substances from the stream of emitted gases. It is obvious that the selection of deodorization technologies is conditioned by many factors, and it should be preceded by an in-depth analysis of possibilities and limitations offered by various solutions. The aim of the article is presentation of the available gas deodorization technologies as to facilitate the potential investors with selection of the method of malodorous gases emission limitation, suitable for particular conditions.

     

Toxicokinetics of chiral polychlorinated biphenyls across different species—a review

Nineteen polychlorinated biphenyls (chiral or C-PCBs) exist as two stable rotational isomers (atropisomers) that are non-superimposable mirror images of each other. C-PCBs are released into the environment as racemic (i.e., equal) mixtures of both atropisomers and undergo atropisomeric enrichment due to biological, but not abiotic, processes. In particular, toxicokinetic studies provide important initial insights into atropselective processes involved in the disposition (i.e., absorption, distribution, biotransformation, and excretion) of C-PCBs. The toxicokinetic of C-PCBs is highly congener and species dependent. In particular, at lower trophic levels, abiotic processes play a predominant role in C-PCB toxicokinetics. Biotransformation plays an important role in the elimination of C-PCBs in mammals. The elimination of C-PCB follows the approximate order mammals > birds > amphibians > fish, mostly due to a corresponding decrease in metabolic capacity. A few studies have shown differences in the toxicokinetics of C-PCB atropisomers; however, more work is needed to understand the toxicokinetics of C-PCBs and the underlying biological processes. Such studies will not only contribute to our understanding of the fate of C-PCBs in aquatic and terrestrial food webs but also facilitate our understanding of human exposures to C-PCBs.     

Treatment of landfill leachates with biological pretreatments and reverse osmosis

Environmental Chemistry Letters - Landfill leachates from municipal landfills are usually heavily contaminated and thus require treatments before direct discharge into natural waters. Selecting the...     

The potential of the Phytotoxkit microbiotest for hazard evaluation of sediments in eutrophic freshwater ecosystems

The applicability of the Phytotoxkit microbiotest for toxicity assessment of sediments in eutrophic freshwater ecosystems was evaluated. Sediments were collected from Turawa dam reservoir (southwestern Poland) which, for years, has been subjected to a marked nutrient enrichment and heavy metal contamination. The test plant species were exposed to whole sediments, solid phases of sediments, and pore waters. Phytotoxicity was estimated on the basis of seed germination and root elongation measurements, combined into an overall germination index (GI). For pore waters, the majority of GI values were not statistically different from the controls, which was consistent with chemical data. For solid phases and whole sediments, GI values showed diversified effects ranging from growth stimulation to growth inhibition. The results obtained vary depending on the plant species and the type of sediment samples. Generally, tests with solid phases of sediments showed phytostimulation, suggesting that higher amount of nutrients adsorbed on organic matter-rich sediments might conceal the inhibitory impact of heavy metals (Cd, Cr, Cu, Mn, Ni, Pb, and Zn). However, this beneficial impact is indicative of a significant nutrient load and, with respect to aquatic ecosystems, its potential resuspention that might accelerate the reservoir eutrophication. Under appropriate conditions heavy metals exerted stronger negative impact on plants. Tests with whole sediments had a higher acidity (pH?5.85) and showed adverse effects, though plant responses vary from inhibition (Lepidium sativum) to stimulation (Sorghum saccharatum). The study demonstrated variability in toxicity of contaminated nutrient-rich sediments as well as effectiveness and usefulness of the Phytotoxkit microbiotest as a practical and reliable tool for evaluation of the hazard of eutrophic ecosystems to higher plants.     

Treatment of urban stormwater for dissolved pollutants: A comparative study of natural organic filter media

Sorption capacities were evaluated for the dissolved stormwater (SW) pollutants onto two tree mulches and jute fiber. SW spiked with predetermined concentrations of copper (Cu), cadmium (Cd), hexavalent chromium (Cr ⁺⁶), lead (Pb), zinc (Zn), and benzo[a]pyrene (B[a]P), naphthalene (NP), fluoranthene (FA), 1,3‐dichlorobenzene (DCB), and butylbenzylphthalate (BBP) were used in this study. Each medium removed close to 100 percent of all the pollutants at the concentrations studied. Sorption capacities (μg/g) of the three organic media were in the order of jute > hardwood mulch > softwood mulch, and on a mole basis, both the heavy metals and the toxic organics were sorbed by the three media in an identical sequence: Cr ⁺⁶ > Cu, Zn > Cd > Pb; and NP > DCB > FA > B[a]P > BBP. Sorption capacities of the hardwood wood mulch and jute fiber for the pollutants were correlated with distinctive physical properties of the pollutants. © 2005 Wiley Periodicals, Inc.     

Synthesis of polychlorinated biphenyls and their metabolites with a modified Suzuki-coupling

A modified procedure for the synthesis of polychlorinated biphenyls (PCBs) utilizing the Suzuki-coupling, a palladium-catalyzed cross-coupling reaction, is described. The coupling of (chlorinated) benzene boronic acids with bromochlorobenzenes, using Pd(dppf)(2)Cl(2) (dppf = 1,1'-bis(diphenylphosphino)ferrocene) as the catalyst and aqueous sodium carbonate as the base, gave the desired PCB congeners in moderate to good yields. Eleven PCB congeners, including environmentally important PCB congeners and metabolites, were synthesized using this modified procedure. This new catalyst Pd(dppf)(2)Cl(2) offers the advantage of being less air-sensitive and has a longer shelf life compared to Pd(PPh(4))(4). Three new (di-)methoxylated PCB congeners were synthesized using the same procedure by either coupling a chlorinated benzene boronic acid with a bromo (di-)methoxybenzene or by coupling a (di-)methoxy benzene boronic acid with a chlorinated bromobenzene. The dimethoxylated PCB congeners were readily converted into the respective dihydroxylated PCB derivatives using boron tribromide in dichloromethane. This approach offers the advantage of high selectivity and moderate to good yields compared to conventional methods such as the Cadogan reaction and allows the use of less toxic starting materials.