A tracer study of headspace ventilation in a collector sewer

A field-scale tracer test was conducted to evaluate in-situ ventilation rates in a major collector sewer. The sewer under study was approximately 11 km long and ranged from 0.61 to 2.1 m in diameter. For the purposes of the tracer testing, the collector was divided into four reaches, each of which was tested individually. The tracer test involved injecting a measured volume of CO gas into a manhole over a short time period. CO concentrations were then measured in the collector headspace at selected manholes along the length of the reach. The technique employed successfully measured average headspace velocities over extended lengths of the collector. In a section that had a relatively stagnant headspace, approximately 1.1 km of sewer could be evaluated, with substantial tracer loss attributed to losses to manholes. In a section of the sewer with elevated headspace velocities, a section approximately 7.0 km long was successfully tested with one injection of tracer gas. The velocities observed in the collector varied substantially with time and location in the collector. The lowest velocities measured were in the upstream sections, with a minimum observed value of 3.8 m/min. The highest velocities were observed in the downstream sections, with a maximum value of 31.5 m/min. The presence of a substantial drop structure appeared to reduce the headspace velocity in the upstream reach. In general, there was an increasing trend in gas-phase flows with distance along the length of the collector. Flows at the discharge end of the collector were almost 2 orders of magnitude greater than those at the beginning.     

Performance evaluation of laser-induced breakdown spectrometry as a multimetal continuous emission monitor

Laser-induced breakdown spectroscopy (LIBS) has been evaluated as a multimetal continuous emissions monitor (CEM) at the U.S. Environmental Protection Agency (EPA) rotary kiln incinerator simulator (RKIS) facility in Raleigh, NC. Two detection systems with a bifurcated optical fiber bundle were used for simultaneously monitoring the concentrations of Be, Cd, Cr, and Hg in the test. Two calibration techniques were evaluated in the laboratory for the field measurements. On-line calibration of relative metal concentration was also performed in the simulated incinerator gas stream. Toxic metal concentrations measured with LIBS have been compared with the EPA reference method (RM) results.     

Changes in concentration of five PCDD/F congeners after cooking beef from treated cattle

A large piece of meat taken from a single animal, which had been dosed with five selected PCDD/Fs, was prepared and cooked by a selection of different methods; burgers (fried, grilled, barbecued), roasts (cooked using conventional and microwave ovens) and stews (open pan and pressure cooked). For some of the cooking methods, concentration changes, on a whole product basis, were observed between raw and cooked product. However, in all cases these could be explained simply through changes arising from loss of water and elimination of PCDD/Fs with released fat. The total amounts of PCDD/Fs present in the system (including in released fat) remained unchanged. Dietary intake of PCDD/Fs could therefore be reduced by the removal of visible fat from meat before cooking and by discarding any fat released from foods during the cooking process.     

ESF Workshop

Dioxin and PCB monitoring programs for food and feeding stuff in most countries of the world, including many European Countries are currently inadequate. Better control of food production lines and food processing procedures is needed to minimize entry of dioxin to the food chain and will help to avoid dioxin contamination accidents. This would also improve the ability to trace back a possible contamination to its source. European guidelines for monitoring programs should be established to ensure comparable and meaningful results. These guidelines should define the minimum requirements for the design of monitoring programs, analytical methods, and quality assurance. Though data from Northern Europe shows that the general population exposure to dioxin and PCB has decreased during the last ten years these compounds continue to be a risk of accidental contamination of the food chain. The most prominent recent example is the Belgian dioxin contamination of feeding stuff in 1999. The Belgian dioxin contamination was not detected due to dioxin monitoring programs but by their direct biological effects seen in animals. Four other cases of dioxin contamination have been detected in Europe since 1997 due to local monitoring programs. One of them (citrus pulp pellets 1998) was in a much larger scale than the Belgian dioxin contamination. The general population's exposure to dioxins and PCBs is still in the same range (1-4 pg WHO-TEQ/kg body weight and day) as the recently revised WHO tolerable daily intake (TDI). There is concern that short-term high level exposure to dioxins, furans, and PCB may cause biological effects on the human fetal development and further research is required. Further actions to control sources building on considerable advances already made in many countries may need to be supplemented by measures to prevent direct contamination of feeding stuff or food to reduce general population exposure further.     

Adsorption of imidazolinone herbicides on ferrihydrite-humic acid associations.

Adsorption of the imidazolinone herbicides imazapyr, imazethapyr and imazaquin was studied on two binary systems (ferrihydrite-humic acid) prepared by treating ferrihydrite (Fh) immediately after its precipitation with a soil humic acid (HA) at different loadings (4% and 8% HA content), and on a blank ferrihydrite sample prepared in the same way, but without HA addition. Imidazolinone adsorption on pure Fh and on the 4% Fh-HA decreased with increasing of the herbicide hydrophobicity (imazaquin相似文献   

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile-immobile-zone model.

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile-immobile-zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51-60% of the average finger diameters.     

Effect of composting on characterization and leaching of copper, manganese, and zinc from swine manure.

This research was conducted to study the influence of composting on the concentrations, water solubility, and phase association of Cu, Mn, and Zn from swine (Sus domesticus) feces. Composting of separated swine manure was performed in two piles for 122 days. The metal concentrations increased rapidly during the first 49 days and leveled off thereafter. All metal concentrations increased approximately 2.7-fold in the final compost due to decomposition of organic matter. A sequential extraction protocol was used to evaluate the humification process and partition metals into water-soluble, exchangeable, organically complexed, organically bound, solid particulate, and residual fractions. Temporal changes in the water-soluble fractions of Cu, Mn, and Zn were reflected by water-soluble organic C concentrations, which rapidly increased to a maximum at Day 18 and declined thereafter. An increase in the humic acid/fulvic acid ratio in Na4P2O7 or NaOH extracts at various stages of composting represented the humification process. During composting, the major portions of Cu, Mn, and Zn were in the organically-bound, solid particulate, and organically complexed fractions, respectively. Metal distributions in different chemical fractions were generally independent of composting age and, thus, independent of respective total metal concentrations in the composts.     

The acute toxicity of agricultural surfactants to the tadpoles of four Australian and two exotic frogs

Nonionic surfactants are frequently incorporated into pesticide formulations, and are therefore a group of chemicals to which amphibians may be exposed in agricultural or urban landscapes. However, little is known about the effects of surfactant exposure in amphibians. Feeding stage tadpoles of Bufo marinus, Xenopus laevis and four species of Australian frogs (Crinia insignifera, Heleioporus eyrei, Limnodynastes dorsalis and Litoria moorei) were exposed to nonylphenol ethoxylate (NPE) and alcohol alkoxylate in static-renewal acute toxicity tests. All species exhibited nonspecific narcosis following exposure to both these surfactants. The 48-h EC50 values for NPE ranged between 1.1 mg/l (mild narcosis) and 12.1 mg/l (full narcosis). The 48-h EC50 values for alcohol alkoxylate ranged between 5.3 mg/l (mild narcosis) and 25.4 mg/l (full narcosis). Replicate acute toxicity tests with B. narinus exposed to NPE at 30 degrees C over 96 h indicated that the narcotic effects were not particularly time dependant. The mean 24, 48, 72, and 96-h EC50 (mild narcosis) values were 3.6, 3.7, 3.5 and 3.5 mg/l, respectively. The mean 24, 48, 72 and 96-h EC50 (full narcosis) were 4.0, 4.1, 4.2 and 4.0, respectively. Acute toxicity tests with B. marinus exposed to NPE at 30 degrees C under conditions of low dissolved oxygen (0.8-2.3 mg/l) produced a two to threefold increase in toxicity.