Remediation of contaminated agricultural soils near a former Pb/Zn smelter in Austria: batch, pot and field experiments

Metal contaminated crops from contaminated soils are possible hazards for the food chain. The aim of this study was to find practical and cost-effective measures to reduce metal uptake in crops grown on metal contaminated soils near a former metal smelter in Austria. Metal-inefficient cultivars of crop plants commonly grown in the area were investigated in combination with in-situ soil amendments. A laboratory batch experiment using 15 potential amendments was used to select 5 amendments to treat contaminated soil in a pot study using two Barley (Hordeum vulgare L.) cultivars that differed in their ability to accumulate cadmium. Results from this experiment identified 3 of these amendments for use in a field trial. In the pot experiment a reduction in ammonium nitrate extractable Cd (<41%) and Pb (<49%) compared to the controls was measured, with a concurrent reduction of uptake into barley grain (Cd<62%, Pb<68%). In the field extractable fractions of Cd, Pb, and Zn were reduced by up to 96%, 99%, and 99%, respectively in amended soils.     

Polycyclic aromatic hydrocarbons in the bulk precipitation and surface waters of Northern Greece

Bulk (wet and dry) precipitation and surface water sampling was undertaken in the main plain of central Macedonia in Northern Greece. Fourteen polycyclic aromatic hydrocarbons (PAHs) included in the US EPA's priority pollutant list were analysed. The concentrations determined in bulk precipitation were in general within the range of values worldwide reported. Concentrations were highest in the cold months. Deposition fluxes of PAHs were of the same order of magnitude as reported data. The greatest values were found when high concentrations of PAHs in precipitation coincided with large precipitation amounts. The concentrations of PAHs in surface waters (main rivers, tributaries, ditches, etc) were in general lower than those in bulk precipitation, and among the lowest reported for European rivers, excepting Np and Ph. Bulk deposition and domestic effluents are suggested as being the main PAH sources into surface waters.     

Simultaneous conversion of CHClF(2) and CH(3)Br to CH(2)CF(2)

Gas phase reaction of CHClF(2) with CH(3)Br in an alumina tube reactor at 773-1123 K as a function of various input ratios of CH(3)Br to CHClF(2) is presented. The major products detected include C(2)F(4), CH(2)CF(2), and CH(4). Minor products include CH(3)Cl, CHF(3), C(2)H(4), C(2)H(2), CH(2)CF-CF(3), and C(2)H(3)F. The reaction produces a high yield of CH(2)CF(2) (53% based on CHClF(2) feed) at 1123 K and an input molar ratio of CH(3)Br to CHClF(2) of 1.8, suggesting that the reaction potentially can be developed as a process to convert two ozone depleting substances (CHClF(2) and CH(3)Br) to a highly valuable chemical, CH(2)CF(2). The reaction of CHClF(2) with CH(3)Cl and CH(3)I was also investigated under similar reaction conditions, to assist in understanding the reaction chemistry involved in the reaction of CHClF(2) with CH(3)Br.     

The solid-phase controls on the mobility of heavy metals at the Copper Cliff tailings area, Sudbury, Ontario, Canada

The Copper Cliff Tailings Disposal Area, located near Sudbury, Ontario, covers an area of approximately 2200 ha and constitutes more than 10% of the total area of all mine tailings in Canada. The area has been utilized since 1936, receiving sulphide-containing tailings from the Inco Sudbury operations. Field measurements of pore-gas oxygen and carbon dioxide in the vadose zone indicate that sulphide oxidation has progressed to depths of 1.6 m to 1.7 m within the tailings. The oxidation of sulphide minerals within the vadose zone, and the accompanying dissolution of carbonate and aluminosilicate minerals within these tailings releases SO₄, Fe(II) and other metals to the pore water. In the vadose and saturated zones, concentrations of Fe and Ni exceed 10100 mg/l and 2210 mg/l, respectively. These high concentrations of dissolved metals are attenuated by a series of precipitation, coprecipitation and adsorption reactions. The precipitation of secondary sulphate and hydroxide phases also create hardpan layers at or near the oxidation front. Geochemical modelling of the pore-water chemistry suggests that pH-buffering reactions are occurring within the shallow oxidized zones, and that secondary-phase precipitation is occurring at or near the underlying hardpan and transition zones. Mineralogical study of the tailings confirmed the presence of jarosite, gypsum and goethite within the shallow tailings, suggesting that these phases are controlling the dissolved concentrations of Fe, SO₄ and Ca. Extraction experiments conducted on the tailings solids indicate that the constituents contained in the water-soluble fraction of the shallow, weathered tailings are derived from the original pore water and the dissolution of highly soluble phases such as gypsum. The acid-leachable fraction of the weathered tailings accounts for up to 25% of the heavy metals, and the reducible fraction may contain up to 100% of the heavy metals within the shallow, weathered tailings. Based on the pore water profiles and the geochemistry of the tailings solids, a relative mobility scale of Fe=Mn=Ni=Co>Cd Zn>Cr=Pb>Cu can be determined.     

Antimony distribution and environmental mobility at an historic antimony smelter site, New Zealand

A historic antimony smelter site at Endeavour Inlet, New Zealand has smelter residues with up to 17 wt.% antimony. Residues include coarse tailings (cm scale particles, poorly sorted), sand tailings (well sorted) and smelter slag (blocks up to 30 cm across). All of this material has oxidised to some degree over the ca. 100 years since the site was abandoned. Oxidation has resulted in acidification of the residues down to pH 2-5. Smelter slag contains pyrrhotite (FeS) and metallic antimony, and oxidation is restricted to surfaces only. The coarse tailings are the most oxidised, and few sulfide grains persist. Unoxidised sand tailings contain 10-20 vol.% stibnite (Sb2S3) containing up to 5% As, with subordinate arsenopyrite (FeAsS), and minor pyrite (FeS2). The sand tailings are variably oxidised on a scale of 2-10 cm, but original depositional layering is preserved during oxidation and formation of senarmontite (Sb2O3). Oxidation of sand tailings has resulted in localised mobility of both Sb and As on the cm scale, resulting in redistribution of these metalloids with iron oxyhydroxide around sand grain boundaries. Experiments demonstrate that Sb mobility decreases with time on a scale of days. Attenuation of both As and Sb occurs due to adsorption on to iron oxyhydroxides which are formed during oxidation of the smelter residues. There is no detectable loss of Sb or As from the smelter site into the adjacent river, <50 m away, which has elevated Sb (ca. 20 microg/l) and As (ca. 7 microg/l) from mineralised rocks upstream. Despite the high concentrations of Sb and As in the smelter residues, these metalloids are not being released into the environment.     

Degradation half-life times of PCDDs, PCDFs and PCBs for environmental fate modeling

Literature search of the knowledge on the degradation of persistent organic pollutants (POPs) in environmental compartments air, water, soil and sediment was done in purpose to find properties of POPs of interest for modeling. One degradation process, hydrolysis (chemical degradation), was omitted as negligibly slow for POPs studied. The other two, photolysis and biodegradation processes, were considered separately in purpose to develop estimation procedures. The estimates can be given as pseudo first-order rate constants kP for photolysis and kB for biodegradation. For each compartment, an overall degradation rate is k(tot) = kP + kB and lifetime t(1/2) = ln 2/k(tot). The latter values, lifetimes in each compartment, will be used as input parameters to the Baltic Sea model.     

Acute toxicity of aromatic and non-aromatic fractions of naphthenic acids extracted from oil sands process-affected water to larval zebrafish

The toxicity of oil sands process-affected water (OSPW) has regularly been attributed to naphthenic acids, which exist in complex mixtures. If on remediation treatment (e.g., ozonation) or on entering the environment, the mixtures of these acids all behave in the same way, then they can be studied as a whole. If, however, some acids are resistant to change, whilst others are not, or are less resistant, it is important to establish which sub-classes of acids are the most toxic.     

Long-term increases in surface water dissolved organic carbon: observations, possible causes and environmental impacts

Dissolved organic carbon (DOC) concentrations in 22 UK upland waters have increased by an average of 91% during the last 15 years. Increases have also occurred elsewhere in the UK, northern Europe and North America. A range of potential drivers of these trends are considered, including temperature, rainfall, acid deposition, land-use, nitrogen and CO2 enrichment. From examination of recent environmental changes, spatial patterns in observed trends, and analysis of time series, it is suggested that DOC may be increasing in response to a combination of declining acid deposition and rising temperatures; however it is difficult to isolate mechanisms based on monitoring data alone. Long-term DOC increases may have wide-ranging impacts on freshwater biota, drinking water quality, coastal marine ecosystems and upland carbon balances. Full understanding of the significance of these increases requires further knowledge of the extent of natural long-term variability, and of the natural "reference" state of these systems.     

Photocatalytic oxidation of triclosan

In the spring of 2003, there was an outbreak of the severe respiratory syndrome (SARS) in Hong Kong. Health concerns have thus triggered an increased and predominant use of various types of household cleansing agents such as triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol). However, it has been reported recently that triclosan could be photochemically converted to toxic 2,8-dichlorodibenzo-p-dioxin (2,8-Cl(2)DD) in the environment. It is therefore necessary to develop environmentally friendly methods for the treatment of triclosan. To this end, photocatalytic degradation of triclosan in aqueous solution was conducted using TiO(2) (Degussa P25) under irradiation of UV light (lambda < 365 nm). It was found that triclosan could be degraded by this approach. Hydrogen peroxide was added to enhance the degradation process, and the optimal initial hydrogen peroxide concentration for triclosan degradation was 0.005% (w/v). Product identification indicated that triclosan oxidation occurred at its phenol moiety and yielded quinone and hydroquinone intermediates. The formation of a dichlorophenol intermediate in triclosan degradation suggested bond-breaking of the ether linkage occurred during the process. Moreover, no chlorinated dibenzo-p-dioxin congener was detected. These findings confirm that the photocatalytic degradation of triclosan is an environmentally friendly process.