The influence of particle surface characteristics on pollutant metal uptake by cells

The phosphatic mineral, hydroxyapatite, and two ion exchange resins have been used as artificial sediment particles. The surface properties of these materials have been studied using the Langmuir adsorption isotherm to calculate the binding capacity (B(max)) and the adsorption constant (K(L)) for zinc and cadmium ions. Mussels (Mytilus edulis) were fed on the particles and their digestive glands were subsequently removed and subjected to cell fractionation. The supernatant fraction was used to determine cytosol metal levels as a measure of the materials absorbed from the ingested particles. The level of cytosol zinc and cadmium was correlated with the K(L) values of the artificial sediments. It is suggested that phagocytosis of sediment particles plays an important part in transferring pollutants into benthic organisms and that the efficiency of this process is related to the adsorption coefficient of the particle surfaces.     

Selectivity in the complexation of actinides by humic substances

The interactions of a range of actinide elements (Th, U, Np, Pu, Am) with humic substances from the Needle's Eye natural analogue site were studied by gel permeation chromatography. Bulk humic substances were isolated by ammonia extraction, followed by dialysis against distilled water and freeze-drying. The gel permeation results suggest that Needle's Eye humic substances can be fractionated into three incompletely resolved fractions with average molecular weights determined by analytical ultracentrifugation around 49 000 for Fraction 1, around 14 700 for Fraction 2 and around 8000 for Fraction 3. Although there are significant differences between the organic matter elution patterns in individual gel permeation experiments, presumably due to differences in column packing, these are much smaller than the differences between metal ions. The uranium that is naturally present in these humic substances is largely bound in the late-eluting fraction. Spikes of the early actinides, including Np and Pu in controlled valency states, have been added to the humic substances, and gel permeation of the spiked humic substances shows that the three humic fractions vary greatly in their effectiveness and selectivity as ligands for early actinides.     

Three-fluid retention in porous media involving water, PCE and air

A classical way to obtain three-fluid retention curves in porous media from measured two-fluid retention curves is based on the Leverett concept, which states that the total volumetric liquid content in a water-wet porous medium, containing water, a nonaqueous-phase liquid (NAPL) and air, is a function of the capillary pressure across the interface between the continuous NAPL and air. This functional relationship results from the assumed condition that in a three-fluid porous medium, the intermediate wetting fluid spreads over the water-air interface. Application of Leverett's concept may not be valid, however, for nonspreading NAPLs like perchloroethylene (PCE). This paper discusses measurements of both PCE-air and water-PCE-air retention curves using a long vertical column in conjunction with a dual-energy gamma radiation system. The data indicate that the Leverett concept was applicable only until a critical PCE saturation had been reached.     

Development of a continuously stirred flow cell for investigating sorption mass transfer

This paper introduces a new reversible-flow design for a continuously stirred reactor used to study sorption mass transfer in soil and solvent systems. The stirred reactor has potential advantages over conventional packed column or batch reactors because it isolates intraparticle sorption rate limitations from advective-dispersive transport, yet allows changes to flux through the reactor for analysis of sorption kinetics under dynamic conditions. Previously, stirred reactors have often failed due to clogging of sediment on the effluent frit. The reverse-flow backwashing design allows longer life and higher confidence in maintaining mixed conditions than previous designs. Mass transfer 'rate coefficients estimated from stirred and column experiments are compared; both techniques produced results consistent with a published correlation. The data also show that fitted sorption mass transfer coefficients can be strongly dependent on the choice of equilibrium partition coefficient (i.e. batch or first-moment derived values), and that the conventional two-site sorption kinetics model fails to accurately predict sorption mass transfer in the presence of changing solvent velocity through the reactor.     

Surface complexation modeling of Yb(III) sorption and desorption on hematite and alumina

Sorption and desorption of Yb(III) were studied on hematite and on alumina using a surface complexation model. The experimental methodology was conceived to allow an analysis of the data using a constant capacitance model. The FITEQL code was used for the calculations.The experimental results tend to show reversibility of sorption when the surface loading is small, and irreversibility when the surface loading is high. Surface complexation modeling gives a good interpretation of these two phenomena, taking into account hydroxylation of the surface complexes. In these two cases, it is possible to describe sorption and desorption curves with the same surface stoichiometries and the same surface complexation constants. The existence of these surface complexes depends on the pH of the solution, surface loading, and reaction direction.     

Intercomparison between TRIO-EF and IMPACT codes with reference to experimental strontium migration data

This work presents an intercomparison exercise between two geochemical migration codes, TRIO-EF (an object-oriented finite element code) and IMPACT (a chemical engineering code using mixing cells in series). The predictions of the two codes are compared with the reference experimental results obtained in a previous study of strontium transport in soil columns. This simulated geochemical system is well documented and includes ion exchange and dissolution-precipitation reactions. The solution transport is simulated by a one-dimensional advection-dispersion model. The predictions of TRIO-EF and IMPACT are both in good agreement with the experimental results. However, slight differences can be observed between the two codes, especially when concentration discontinuities are involved, such as precipitation fronts or changes in boundary conditions. These discrepancies between the two codes can mainly be attributed to the different discretisation approaches.     

Regression modelling of hourly NOx and NO2 concentrations in urban air in London

Based on hourly measurements of NO_x NO₂ and O₃ and meteorological data, an ordinary least squares (OLS) model and a first-order autocorrelation (AR) model were developed to analyse the regression and prediction of NO_x and NO₂ concentrations in London. Primary emissions and wind speed are the most important factors influencing NO_x concentrations; in addition to these two, reaction of NO with O₃ is also a major factor influencing NO₂ concentrations. The AR model resulted in high correlation coefficients (R > 0.95) for the NO_x and NO₂ regression based on a whole year's data, and is capable of predicting NO₂ (R = 0.83) and NO_x (R = 0.65) concentrations when the explanatory variables were available. The analysis of the structure of regression models by Principal Component Analysis (PCA) indicates that the regression models are stable. The results of the OLS model indicate that there was an exceptional NO₂ source, other than primary emission and reaction of NO with O₃, in the air pollution episode in London in December 1991.     

Biodegradation of crosslinked acrylic polymers by a white-rot fungus

Two synthetic superabsorbent crosslinked acrylic polymers were mineralized by the white-rot fungusPhanerochaete chrysosporium. The amount of polymer converted to CO₂ increased as the amount of polymer added to the cultures increased. In the presence of sufficiently large amounts of the superabsorbents, such that all of the culture fluid was absorbed and a gelatinous matrix was formed, the fungus still grew and mineralization was observed. Neither the polymers, nor their degradation products were toxic to the fungus. While the rates of mineralization were low, all of the polymers incubated in the liquid fungal cultures were completely depolymerized to water soluble products within 15–18 days. The depolymerization of the polymers was observed only in nitrogen limited cultures of the fungus which secrete the lignin degradation system, however, the water soluble products of depolymerization were mineralized in both nutrient limited and sufficient cultures of the fungus. The rate of mineralization of the depolymerized metabolites was more than two times greater in nutrient sufficient cultures. Following longer incubation periods, most (> 80 %) of the radioactivity was recovered in the fungal mycelial mat suggesting that carbon of the polymer had been converted to fungal metabolites.     

Metal accumulation in sediments and benthic invertebrates in lakes of Latvia

The concentrations of cadmium, lead, nickel and copper in waters, sediments (total metal concentrations and their speciation forms) and benthic macroinvertebrates in 11 lakes of Latvia were determined using atomic absorption spectroscopy. Metal concentrations in lake waters, sediments and biota were compared with water chemistry. Compared to total concentrations, metal speciation forms in sediments were better correlated with respective metal concentrations in invertebrates. Therefore, the evaluation of potential metal bioaccumulation should consider metal speciation. The mean concentrations of trace metals in benthic invertebrates in Latvia were much lower than in other countries, which can be explained by comparatively lower anthropogenic loads. However, local areas of anthropogenic impacts were evident.     

Germination and seedling development of switchgrass and smooth bromegrass exposed to 2,4,6-trinitrotoluene

It is estimated that explosives contaminate approximately 0.82 million cubic metres of soil at former military installations throughout the US; major contaminants often include 2,4,6-trinitrotoluene (TNT) and its degradation products. At some sites, phytoremediation may be a viable option to incineration or other costly remediation treatments. Grasses may be particularly suited for remediation because of their growth habit and adaptability to a wide range of soil and climate conditions. We characterized the effects of TNT on germination and early seedling development of switchgrass and smooth bromegrass to evaluate their potential use on contaminated sites. Switchgrass and smooth bromegrass seeds were germinated in nutrient-free agar containing 0 to 60 mg TNT litre(-1). Smooth bromegrass germination decreased as TNT concentration increased, while switchgrass germination was unaffected by TNT. Concentrations up to 15 mg TNT litre(-1) did not affect switchgrass root growth rate, but bromegrass root growth was reduced at TNT concentrations above 7.5 mg litre(-1). At 7.5 mg TNT litre(-1), however, shoot growth rate was reduced in both species. Examination at 20-fold magnification revealed switchgrass radicles were unaffected by TNT, while smooth bromegrass radicles appeared slightly swollen. Results indicate switchgrass is more tolerant of TNT than smooth bromegrass, but the establishment of both species may be limited to soil containing less than 50 mg kg(-1) of extractable TNT.