Catalytic and electrocatalytic hydrogenolysis of brominated diphenyl ethers

Polybrominated diphenyl ethers (PBDEs) are ubiquitous environmental contaminants due to their use as additive flame-retardants. Conventional catalytic hydrogenolysis in methanol solution and electrocatalytic hydrogenolysis in aqueous methanol were examined as methods for debrominating mono- and di-bromodiphenyl ethers, as well as a commercial penta-PBDE mixture, in each case using palladium on alumina as the catalyst. Electrocatalytic hydrogenolysis employed a divided flow-through batch cell, with reticulated vitreous carbon cathodes and IrO2/Ti dimensionally stable anodes. Both methods gave efficient sequential debromination, with essentially complete removal of bromine from the PBDEs, but the electrocatalytic method was limited by the poor solubility of PBDEs in aqueous methanol.     

Bioassay for determining sensitivity to sulfosulfuron on seven plant species

This study presents a bioassay procedure, based on the root and shoot growth parameters, for the determination of the herbicide sulfosulfuron (1-(4,6 dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin-3-ylsulfonil)urea) sensitivity on seven vegetal species. Plant response to sulfosulfuron was calculated with the equations fitted to the root growth data as a function of the logarithm of the herbicide concentration by non-linear regression and was used to calculate the doses for 10, 30 and 50% inhibition of root growth (EC10, EC30 and EC50). The results indicate that the phytotoxic effect of sulfosulfuron in all the species assayed followed the order: flax > maize > onion > vetch > lepidium sativum > tomato > barley. These species showed phytotoxicity at low levels of sulfosulfuron and flax appeared to be the most susceptible species to sulfosulfuron (0.001 mg/L).     

Air Pollution Control of an Electric Furnace Steelmaking Shop

The body of information presented in this paper is directed to design engineers, operating management and others who may be concerned with the prevention of atmospheric emissions from electric arc steelmaking furnaces. Inland Steel Co. has recently begun operating its first electric furnace shop. Air pollution control equipment for the shop was installed to meet or exceed the legal requirements of applicable air pollution ordinances and regulations. General shop production requirements were established at 100 tons of steel per hour (maximum) to meet sales forecasts and intermediate production facility requirements. Conventional swing roof furnace design was selected for the pair of furnaces in the shop.     

The fate of recombinant plasmids during composting of organic wastes

Composting was investigated as a means for safe disposal of organic waste containing bacteria that carry transgenes in recombinant plasmids. To generate model recombinant plasmids, a mobile IncQ plasmid, RSF1010, and a non-mobile plasmid, pGFP, were genetically modified to carry a DNA segment encoding both green fluorescent protein and kanamycin resistance and were designated as RSF1010-GFPK and pGFPK. Escherichia coli (E. coli) C600 harboring these plasmids were inoculated into chicken manure specimens that were placed in compost at 20 and 60 cm from the bottom of a 1.0-m high compost bin. Control specimens were held at ambient temperature. By day 10, compost temperatures at the lower and upper levels of the bin had reached 45.3 and 61.5°C, respectively, and at both levels the target E. coli had been inactivated and the plasmids had lost their capacity to be transformed or mobilized. Furthermore, based on real time Polymerase chain reaction (PCR), the transgene fragments along with the host chromosomal DNA fragment from specimens at the upper level had been degraded beyond the detection limit. However, at the lower level where temperatures remained below 48°C these fragment persisted to day 21. At ambient temperatures (0–8°C), the E. coli, plasmids and the transgene fragments persisted in manure specimens throughout the 21 day test period. The study showed the potential for composting as a safe procedure for disposal of bacteria carrying transgenes in recombinant plasmids.     

PCDD/F reduction in incinerator flue gas by adding urea to RDF feedstock

The effect of urea on PCDD/F formation in a pilot incinerator was studied by incinerating urea with refuse-derived fuel (RDF) at three concentrations (0.1%, 0.5% and 1.0%, of the fuel feed). A distinct reduction in both PCDD/F and chlorophenol concentrations could be noticed when urea was introduced into the system. Partial-least-square (PLS) analysis of the data showed the importance of certain chlorophenol isomers as PCDD/F precursors, pointing to the possibility that the impact point of the urea inhibitor could be before the precursor molecules, i.e. chlorophenols, have been formed.     

Controlling air pollution from passenger ferries: cost-effectiveness of seven technological options

Continued interest in improving air quality in the United States along with renewed interest in the expansion of urban passenger ferry service has created concern about air pollution from ferry vessels. This paper presents a methodology for estimating the air pollution emissions from passenger ferries and the costs of emissions control strategies. The methodology is used to estimate the emissions and costs of retrofitting or re-powering ferries with seven technological options (combinations of propulsion and emission control systems) onto three vessels currently in service in San Francisco Bay. The technologies include improved engine design, cleaner fuels (including natural gas), and exhaust gas cleanup devices. The three vessels span a range of ages and technologies, from a 25-year-old monohull to a modern, high-speed catamaran built only four years ago. By looking at a range of technologies, vessel designs, and service conditions, a sense of the broader implications of controlling emissions from passenger ferries across a range of vessels and service profiles is provided. Tier 2-certified engines are the most cost-effective choice, but all options are cost-effective relative to other emission control strategies already in place in the transportation system.     

Effects of past sewage sludge additions on heavy metal availability in light textured soils: implications for crop yields and metal uptakes

The effect of heavy metal additions in past sewage sludge applications on soil metal availability and the growth and yield of crops was evaluated at two sites in the UK. At Gleadthorpe, sewage sludges enriched with salts of zinc (Zn), copper (Cu) and nickel (Ni) had been applied to a loamy sand in 1982 and additionally naturally contaminated Zn and Cu sludge cakes in 1986. At Rosemaund, sewage sludges naturally contaminated with Zn, Cu, Ni and chromium (Cr) had been applied in 1968-1971 to a sandy loam. From 1994 to 1997, the yields of both cereals and legumes at Gleadthorpe were up to 3 t/ha lower than the no-sludge control where total topsoil Zn and Cu concentrations exceeded 200 and 120 mg/kg, respectively, but only when topsoil ammonium nitrate extractable metal levels also exceeded 40 mg/kg Zn and 0.9 mg/kg Cu. At Rosemaund, yields were only decreased where total topsoil Cu concentrations exceeded 220 mg/kg or 0.7 mg/kg ammonium nitrate extractable Cu. These results demonstrate the importance of measuring extractable as well as total heavy metal concentrations in topsoils when assessing likely effects on plant yields and metal uptakes, and setting soil quality criteria.     

Dehalogenation of 2,6-dibromobiphenyl and 2,3,4,5,6-pentachlorobiphenyl in contaminated estuarine sediment

Estuarine sediments from a USEPA Superfund site in coastal Georgia were extensively contaminated with Aroclor 1268, a mixture of highly chlorinated polychlorinated biphenyls used by a former chlor-alkali plant. Batch slurries of contaminated sediment were incubated for 1 yr with amendments of 2,6-dibromobiphenyl (26-BB) and 2,3,4,5,6-pentachlorobiphenyl (23456-CB) under anaerobic, sulfate-reducing conditions and different pH (5.5-7.5). Organic extracts of slurry sub-samples in a time series were analyzed by congener-specific GC-MS. Dechlorination of 23456-CB was pH dependent and occurred via two routes with the sequential loss of (1) meta and para chlorines and (2) para, ortho, and meta chlorines. Quantitative dehalogenation of 26-BB was observed at all pH. Supplementation of nonachlorobiphenyls (as primers) did not induce dechlorination of native Aroclor 1268 nor of the primers themselves. While contaminated estuarine sediments possess microbial consortia with diverse dehalogenating activities, lack of dechlorination of Aroclor 1268 and spiked nonachlorobiphenyl congeners suggests a bioavailability limitation or enzyme-substrate incompatibilities.