Effects of elevated CO2 concentration on the polyamine levels of field-grown soybean at three O3 regimes

Effects of increased ozone (O3) and carbon dioxide (CO2) on polyamine levels were determined in soybean (Glycine max L. Merr. cv. Clark) grown in open-top field chambers. The chamber treatments consisted of three O3 regimes equal to charcoal filtered (CF), non-filtered (NF), and non-filtered plus 40 nl litre(-1) O3 and CO2 treatments equal to 350, 400 and 500 microl litre(-1) for a total of nine treatments. Leaf samples were taken at three different times during the growing season. Examination of growth and physiological characteristics, such as photosynthesis, stomatal resistance, and shoot weight, revealed that increasing CO2 ameliorated the deleterious effects of increased O3. Results from the initial harvest, at the pre-flowering growth stage (23 days of treatment), showed that increasing O3 at ambient CO2 caused increases in putrescine (Put) and spermidine (Spd) of up to six-fold. These effects were lessened with increased CO2. Elevated CO2 increased polyamines in plants treated with CF air, but had no effect in the presence of ambient or enhanced O3 levels. Leaves harvested during peak flowering (37 days of treatment) showed O3-induced increases in Put and Spd at ambient CO2 concentrations. However, increased CO2 levels inhibited this response by blocking the O3-induced polyamine increase. Leaves harvested during the pod fill stage (57 days of treatment) showed no significant O3 or CO2 effects on polyamine levels. Our results demonstrate that current ambient O3 levels induce the accumulation of Put and Spd early in the growing season and that further increases in O3 could result in even greater polyamine increases. These results are consistent with a possible antiozonant function for polyamines. The ability of increased CO2 to protect soybeans from O3 damage, however, does not appear to involve polyamine accumulation.     

Disappearance of bromopropylate residues in artichokes, strawberries and beans

Residues of Bromopropylate were determine in artichokes, strawberries and beans after foliar spray of acaricide at two rates. The rates used were 1 g/l formulated product (normal recommended) and 1.5 g/l. The residue levels of bromopropylate in the three crops after 14 days were lower than 0.7 ppm and did not exceed the Maximum Residual Level (MRL) recommended by FAO. In the artichokes and strawberries, the total concentration of residues decreased by 50% of the initial level after 2-3 days. Only trace levels of the bromopropylate residues (less than 0.01 ppm) were detected in the "hearts" of the artichokes. Bromopropylate residues in the green beans were also less than 0.8 ppm after the first day of foliar spraying. The kinetic of degradation occurred in two different steps. In the first step (4-6 days) the dissipation of bromopropylate was faster whereas in the second step (7-14 days) the loss of residues was much slower.     

Effect of mecoprop drift on some plant species of conservation interest when grown in standardized mixtures in microcosms

There has been an increasing awareness of potential impacts of herbicide drift on to vegetation in nature reserves and field margin habitats adjacent to treated areas. Previous work using single species bioassays has suggested that the effects of a single drift event are confined close to the sprayer (< 10 m). In the present study eight native dicotyledonous species, with and without a perennial grass (Lolium perenne), were grown in standardized microcosms in order to study (1) the effects of herbicide drift where plants were exposed to competition, and (2) the effects of a second spray application. The microcosms were arranged downwind (0-8 m) of a standard agricultural sprayer applying mecoprop at recommended rates. The effects of the herbicide drift on foliar symptoms of plant damage and end-of-season yield were assessed in each of two years. The main conclusions were that (1) growth of Stachys sylvatica and Lolium perenne (where sown) was enhanced near the sprayer and, (2) six other species (Digitalis purpurea, Galium mollugo, Hypericum hirsutum, Lychnis flos-cuculi, Primula veris and Ranunculus acris) showed some evidence of reduction in either performance (assessed non-destructively after a single exposure) or yield after two exposures. Three species (Lychnis flos-cuculi, Primula veris and Ranunculus acris) showed a reduction in flowering performance. Thus, mecoprop drift affected the aesthetic appearance, possibly the fecundity of some species and the balance between species in these microcosm experiments. The implications of these results for the persistence of attractive plant communities in sensitive areas are discussed.     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

Analysis of pollutant levels in central Hong Kong applying neural network method with particle swarm optimization

Air pollution has emerged as an imminent issue in modernsociety. Prediction of pollutant levels is an importantresearch topic in atmospheric environment today. For fulfillingsuch prediction, the use of neural network (NN), and inparticular the multi-layer perceptrons, has presented to be acost-effective technique superior to traditional statisticalmethods. But their training, usually with back-propagation (BP)algorithm or other gradient algorithms, is often with certaindrawbacks, such as: 1) very slow convergence, and 2) easilygetting stuck in a local minimum. In this paper, a newlydeveloped method, particle swarm optimization (PSO) model, isadopted to train perceptrons, to predict pollutant levels, andas a result, a PSO-based neural network approach is presented. The approach is demonstrated to be feasible and effective bypredicting some real air-quality problems.     

Cadmium and zinc source assessment in the Sepetiba Bay and basin region

Industrial and weathering inputs of Cd and Zn to the Sepetiba Bay and basin were assessed, based on production parameters obtained from local environment and industry authorities, and literature data. The results are compared with similar evaluations from other coastal regions and field data obtained in measuring Zn and Cd transport by rivers, direct run-off and atmospheric deposition in the region. Cadmium and zinc inputs to the bay increased by three orders of magnitude relative to pre-industrial fluxes and presently reach up to 1.6 and 180 tonnes per year for Cd and Zn, respectively, which represents a large input-to-area ratio, and explains the high concentration of these metals previously reported in the estuarine biota and sediments of Sepetiba Bay. Industrial activities, mainly metallurgical and chemical, comprise 94% and 84% of the total Cd and Zn inputs to the Bay. This figure identifies the point sources as being responsible for the environmental contamination and for regional poisoning risks.     

Speciation of arsenic using solid phase extraction cartridges

Various solid phase extraction (SPE) cartridges were investigated for speciation of arsenite [As(III)], arsenate [As(v)], monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA). Cartridges containing different types of sorbent materials were tested for arsenic retention and elution characteristics. Alumina cartridges were found to completely retain all the four target arsenic species, and are suitable for removal and preconcentration purposes. For speciation analysis, different arsenic species were separated on the basis of their selective retention on and elution from specific cartridges. DMA was retained on a resin-based strong cation exchange cartridge and eluted with 1.0 M HCl. MMA and As(v) were both retained on a silica-based strong anion exchange cartridge and sequentially eluted with 60 mM acetic acid (for MMA) and 1.0 M HCl [for As(v)]. As(III) was not retained on either cartridge and remained in solution. Arsenic species in solution and those eluted from the cartridges were subsequently quantified by using flow injection with hydride generation atomic fluorescence spectrometry (FI-HGAFS) and hydride generation atomic absorption spectrometry (FI-HGAAS). A detection limit of 0.05 microg L(-1) arsenic in water sample was achieved using HGAFS. An application of the method was demonstrated at a drinking water treatment facility. As(III) and As(v) species were determined in water at various stages of treatment. The method is suitable for routine determination of trace levels of arsenic in drinking water to comply with more stringent environmental regulations.     

Optimal and suboptimal control of anaerobic digesters

Anaerobic digester failure due to entry of inhibitors or sudden changes in the feed substrate concentration may be encompassed beneficially by applying optimal control theory. An almost proportional relationship between the dilution rate and the methane production rate leads to a simple suboptimal control law with only minor loss in performance, after the occurrence of the above mentioned events.     

Parameter values to model the soil ingestion pathway

Soil ingestion is an important exposure pathway for contaminants that are not otherwise very mobile in the environment. Health of both humans and animals can be affected. This paper summarizes the literature and recommends models and probabilistic parameter values for risk assessment applications. Models of the pathway require estimates of the amounts of soil ingested, the concentration of contaminants relative to the original soil, and the bioavailability in the gut of the contaminants ingested with soil. Using a lead-contaminated sandbox as an example, the modelling recommendations suggest that a child typically may consume 50 mg d^–1 of the sandbox soil, the soil ingested will have a tenfold higher lead concentration than the original soil, and the lead will be as bioavailable as if ingested as inorganic lead in water.The Canadian Government right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.