The value of Seasonal Correction Factors in assessing the health risk from domestic radon: a case study in Northamptonshire, UK

Following an intensive survey of domestic radon levels in the United Kingdom (UK), the former National Radiological Protection Board (NRPB), now the Radiation Protection Division of the Health Protection Agency (HPA-RPD), established a measurement protocol and promulgated Seasonal Correction Factors applicable to the country as a whole. Radon levels in the domestic built environment are assumed to vary systematically and repeatably during the year, being generally higher in winter. The Seasonal Correction Factors therefore comprise a series of numerical multipliers, which convert a 1-month or 3-month radon concentration measurement, commencing in any month of the year, to an effective annual mean radon concentration. In a recent project undertaken to assess the utility of short-term exposures in quantifying domestic radon levels, a comparative assessment of a number of integrating detector types was undertaken, with radon levels in 34 houses on common geology monitored over a 12-month period using dose-integrating track-etch detectors exposed in pairs (one upstairs, one downstairs) at 1-month and 3-month resolution. Seasonal variability of radon concentrations departed significantly from that expected on the basis of the HPA-RPD Seasonal Correction Factor set, with year-end discontinuities at both 1-month and 3-month measurement resolutions. Following this study, monitoring with electrets was continued in four properties, with weekly radon concentration data now available for a total duration in excess of three and a half years. Analysis of this data has permitted the derivation of reliable local Seasonal Correction Factors. Overall, these are significantly lower than those recommended by HPA-RPD, but are comparable with other results from the UK and from abroad, particularly those that recognise geological diversity and are consequently prepared on a regional rather than a national basis. This finding calls into question the validity of using nationally aggregated Seasonal Correction Factors, especially for shorter exposures, and the universal applicability of these corrections is discussed in detail.     

Presence, biotransformation and effects of sulfophenylcarboxylic acids in the benthic fish Solea senegalensis

The presence of linear alkylbenzene sulfonates (LAS) and their degradation intermediates, sulfophenylcarboxylic acids (SPCs), with concentrations up to 100 ppb has been found in surface waters taken from the estuary of the river Guadalete (Cádiz, SW of Spain). Higher concentrations were found at the sampling site located adjacent to the discharge outlet of a wastewater treatment plant (WWTP). The concentrations decreased downstream to a few ppb as a result of dilution, sorption, and degradation processes, which were taking place along the estuary. Once the presence of both xenobiotics was confirmed in the environment, an in vivo assay was conducted to study their biotransformation and effects in the benthic fish Solea senegalensis. A flow-through system was employed, consisting of an exposure phase (120 h) with environmental levels of the surfactant (200, 500 and 800 microg/L of 2?C(10)LAS), followed by a depuration stage (72 h). The generation of SPCs has been quantified during these phases in both water and fish, with LAS biotransformation shown in all cases. The antioxidant enzymes catalase (CAT), glutathione peroxidase (GPX), glutathione reductase (GR), the phase II enzyme glutathione S-transferase (GST), and the phase III acid and alkaline phosphatases (AcP, ALP) were also estimated and utilized as biomarkers.     

Distribution of organotin compounds in the bivalves of the Aegean Sea, Greece

Five bivalve species--Mytilus galloprovinciallis (Mediterranean mussels), Venus gallina (stripped venus), Modiola barbatus L. (bearded horse mussels), Pecten jacobeus (scallops) and Callista chione (hard clams)--were collected from seven areas in Aegean Sea, Greece, between August 2001 and January 2003 and analyzed for organotins (OTs). The concentrations (as geometric means) found were 17.1 ng g-1 for tributyltin (TBT), 18.8 ng g-1 for dibutytltin (DBT), 7.8 ng g-1 for monobutyltin (MBT) and 13.0 ng g-1 for triphenyltin (TPhT) (wet weight), which are at similar or lower levels than those reported worldwide. Studying OTs distribution between different bivalve species, lower concentrations were observed in mediterranean mussels, possibly due to their growth in water column (grown on sea net pens in mussel farms), in contrast to the free-ranging species, collected from fishing grounds. Concentrations of the OTs in the examined bivalves varied seasonally.     

The role of coalitions in disaster policymaking

Disasters have the potential to act as focusing events, which can increase the amount of attention on disaster‐related problems and encourage policy action. Understanding of the political characteristics of disaster policymaking is underdeveloped, yet it is known that these features may be dissimilar to those of non‐disaster policy areas, especially concerning the coalitions of policy actors engaged in the disaster policy process. Coalitions in the realm of disaster policy processes may be less likely to form, may look very different, and may have different goals than those in non‐disaster domains. Knowledge of the emergence, composition, and purpose of coalitions in disaster policy is lacking. This paper draws on prior theory and case observations to define and describe the characteristics of a disaster policy subsystem and to build a typology of coalitions that may appear within such a subsystem, providing a foundation upon which scholars can work to study coalition dynamics in disaster policy subsystems.     

Direct evidence of trophic interactions among apex predators in the Late Triassic of western North America

Hypotheses of feeding behaviors and community structure are testable with rare direct evidence of trophic interactions in the fossil record (e.g., bite marks). We present evidence of four predation, scavenging, and/or interspecific fighting events involving two large paracrocodylomorphs (=‘rauisuchians’) from the Upper Triassic Chinle Formation (～220–210 Ma). The larger femur preserves a rare history of interactions with multiple actors prior to and after death of this ～8–9-m individual. A large embedded tooth crown and punctures, all of which display reaction tissue formed through healing, record evidence of a failed attack on this individual. The second paracrocodylomorph femur exhibits four unhealed bite marks, indicating the animal either did not survive the attack or was scavenged soon after death. The combination of character states observed (e.g., morphology of the embedded tooth, ‘D’-shaped punctures, evidence of bicarination of the marking teeth, spacing of potentially serial marks) indicates that large phytosaurs were actors in both cases. Our analysis of these specimens demonstrates phytosaurs targeted large paracrocodylomorphs in these Late Triassic ecosystems. Previous distinctions between ‘aquatic’ and ‘terrestrial’ Late Triassic trophic structures were overly simplistic and built upon mistaken paleoecological assumptions; we show they were intimately connected at the highest trophic levels. Our data also support that size cannot be the sole factor in determining trophic status. Furthermore, these marks provide an opportunity to start exploring the seemingly unbalanced terrestrial ecosystems from the Late Triassic of North America, in which large carnivores far outnumber herbivores in terms of both abundance and diversity.     

Ensuring the continued success of a mulch biowall at a trichloroethylene-contaminated superfund site: Lessons learned

Trichloroethylene (TCE) is a toxic organic compound, which can adversely affect human health. The chemical is one of the most frequently found contaminants in groundwater in the United States and around the world. A landfill in Maryland contaminated with high levels of TCE decades ago was added to the U.S. Environmental Protection Agency's National Priority List (NPL) in 1994. A biowall was installed on the site in 2013 to promote the bioremediation of TCE and subsequently of its degradation products. Six-year monitoring data indicated a steady removal of >99% groundwater TCE at the wall since installation. However, a concurrent buildup of intermediate byproducts was observed downgradient of the wall. An examination of the entire system was necessary to find the reason behind the inefficiency of the biowall. In this study, the background of the site, remediation plan, and installation were assessed. Monitoring data, including the concentration of TCE and its degradation byproducts, and geochemical and physical characteristics were evaluated to understand the conditions and challenges facing decision-makers of this project and possible options to improve biowall efficacy.     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

Recycling potential of MWCNTs/HDPE nanocomposite filament: 3D printing and mechanical characterization

Journal of Material Cycles and Waste Management - Fused filament fabrication (FFF) based additive manufacturing (AM) process is a widely used and emerging manufacturing process for...