Biodegradation of chlorinated solvents in a water unsaturated topsoil

In order to investigate topsoils as potential sinks for chlorinated solvents from the atmosphere, the degradation of trichloromethane (CHCl(3)), 1,1,1-trichloroethane (CH(3)CCl(3)), tetrachloromethane (CCl(4)), trichloroethene (C(2)HCl(3)) and tetrachloroethene (C(2)Cl(4)) was studied in anoxic laboratory experiments designed to simulate denitrifying conditions in water unsaturated topsoil. Active denitrification was demonstrated by measuring the release of 15N in N(2) to the headspace from added 15N labeled nitrate. The degradation of chlorinated aliphatic compounds was followed by measuring their concentrations in the headspace above the soil.The headspace concentrations of all the chlorinated solvents except CH(3)CCl(3) were significantly (P相似文献   

Trace metal behaviour in the Conwy estuary,North Wales

The distribution of trace metals Zn, Ni, Mn, Fe, Cu, Pb, Cd and Cr between suspended particulate matter (SPM) and water in the Conwy estuary, North Wales, has been studied in three surveys in 1998. Dissolved Cu and Mn showed some monthly variations. Most of the dissolved trace metals displayed a negative association with salinity, indicating rivers as a major source of inputs for them. Particulate Zn, Mn and Fe showed a decreasing concentration seaward, whilst the levels of Ni, Cu, Cr and Pb increased with salinity. SPM concentration was the most important variable significantly related to trace metal concentrations in SPM, with an inverse relationship between the two parameters. This was explained by the relative enrichment of trace metals in fine particles at low SPM concentrations and relative depletion of trace metals in coarse particles at high SPM concentrations. Particulate Zn, Mn and Pb were dominated by the fraction available to acetic acid (non-detrital), whilst particulate Ni, Fe and Cr were dominated by the fraction available to nitric acid (detrital). The partition coefficient of trace metals between SPM and water declined with increasing SPM concentration, consistent with the so-called "particle concentration effect". Such a phenomenon may be explained by the presence of fine particles (including colloids) enriched with trace metals at low SPM concentrations, and the salinity-induced desorption.     

Preparation of mercury emissions inventory for eastern North America

Point and area inventories of anthropogenic mercury emissions documented by US and Canadian environmental agencies have been aggregated into a single archive for analysis and air pollution modeling work. For 5341 point sources and 1634 aggregated area sources, mercury emissions are apportioned among elemental gaseous [Hg(0)], reactive gaseous[Hg(II)], and particulate [Hg(p)] emissions using speciation factors derived from available monitoring measurements. According to this inventory, 4.82 x 10(5) mol of mercury were emitted in calendar year 1996 in the latitude range 24-51 degrees north, and longitude range 64-91 degrees west, which covers most of North America east of the Mississippi River. Using speciation factors consistent with past emission source studies, we find the relative emission proportions among Hg(0):Hg(II):Hg(p) species are 47:35:18. Maps of the various mercury species' emissions patterns are presented. Gridded emission patterns show local mercury emission extremes associated with individual cement production and municipal incineration facilities, and in contrast to past inventories, population centers do not stand out. Considerable uncertainties are still present in estimating emissions from large point sources, as are methods of apportioning emissions among various mercury species.     

Geochemical evidences of the anthropogenic alteration of trace metal composition of the sediments of Chiricahueto marsh (SE Gulf of California)

Seven sediment cores (60-80 cm) were collected at Chiricahueto marsh, a salt marsh influenced by agrochemical, domestic and industrial effluents. The concentrations of Ag, Al, Cd, Co, Cu, Fe, Li, Mn, Pb, V and Zn were studied in the solid phase at each 1-cm section. The profiles of Ag, Cd, Cu, Mn, Ni, Pb and Zn showed a slight recent pollution in the site with enrichment and anthropogenic factors higher than unity; and correlation analysis indicated a direct association with organic carbon. Al, Co, Cr, Fe, Li, and V concentration profiles displayed a negative correlation with organic C and positive with mud content and no consistent enrichment at surface. Based on the principal component analysis and correlation analysis, two principal groups of metals were identified. The first group includes Al, Co, Cr, Fe and Li, that are derived predominantly from the weathering of parent materials in the local bedrock; and the second group include most of the metals, which were relatively enriched at surficial sediments, that are produced mainly by anthropogenic activities such as agriculture (Cd, Cu and Zn), sewage effluents (Ag, Cd, Cu, Ni, Pb and Zn) and in lesser extent atmospheric deposition (Cd and Pb).     

Fate and assessment of persistent organic pollutants in water and sediment from Minjiang River Estuary,Southeast China

Persistent organochlorine compounds were analyzed in surface water, porewater and surficial sediment samples from Minjiang River Estuary, which is the first large river in Fujian Province, Southeast of China. The total concentrations of 18 organochlorine pesticides were 214.4-1819, 4541-13,699 ng/l, 28.79-52.07 ng/g in surface water, porewater and sediments (dry weight) respectively, and those of 21 polychlorinated biphenyls (PCBs) in the three phases were: 203.9-2473, 3192-10,855 ng/l, 15.14-57.93 ng/g respectively. The results showed that the concentrations of these selected organochlorine pesticides and PCBs in porewater were higher than those in surface water. It may be due to the fact that these organic hydrophobic pollutants tend to stay in the sediments, and then re-suspend from the sedimentary phase to the upper water. We have analyzed the distribution characteristics of individual organochlorine pesticide components and PCBs, and found that alpha-HCH, DDE, Heptachlor, Endosulfan II, Methoxychlor were the most common organochlorine pesticides contaminants. Considering the groups of HCHs (HCHs=alpha-HCH+beta-HCH+gamma-HCH+delta-HCH) and DDTs (DDTs=DDT+DDD+DDE), the predominance of beta-HCH, DDE in all water, porewater and sediment samples was clearly observed. This observation suggested that beta-HCH was resistant to biodegradation and the DDTs had been transformed to its metabolites, DDE and DDD, of which DDE that was more un-degradable. The PCB congeners containing 3-6 chlorines had the great preponderance in the three phase. These results were compared with those present in other estuaries and harbors. A risk assessment was evaluated for the persistent organic pollutants in the Minjiang River Estuary.     

Differences between weekday and weekend air pollutant levels in southern California

Ambient air quality data were analyzed to empirically evaluate the effects of reductions of volatile organic compounds (VOCs) and oxides of nitrogen (NOx) emissions on weekday and weekend levels of ozone (O3; 1991-1998) and particulate NO3- (1980-1999) in southern California. Despite significantly lower O3 precursor levels on weekends, 20 of 28 South Coast Air Basin (SoCAB) sites (28 of all 78 southern California sites) showed statistically significant higher mean O3 levels on Sundays than on weekdays (p < 0.01); 49 of the remaining 50 sites showed no significant differences between mean weekday and Sunday peak O3 levels. We also observed no statistically significant differences between mean weekday and weekend concentrations of particulate NO3- or nitric acid (HNO3, the precursor of particulate NO3-). Averaged over sites, the mean Sunday NOx and nonmethane hydrocarbon concentrations were 25-41% and 16-30% lower, respectively, than on weekdays. Site-to-site differences between weekend and weekday mean peak hourly O3 levels were related to whether O3 formation was limited by the availability of NOx. A thermodynamic equilibrium model predicts that particulate NO3- levels would decrease in response to a reduction of HNO3, and that particulate ammonium NO3- formation was not limited by the availability of ammonia. The similarity of mean weekday and weekend levels of NO3- therefore did not result from limitations on the formation of particulate NO3- from its precursor, HNO3.     

Boreal bog plants: nitrogen sources and uptake of recently deposited nitrogen

The main goals of this study were to determine the delta15N signature of quantitatively important boreal bog plants as basis for discussing their N sources, and to assess the effects of five different 3 year N treatments (i.e. 0, 5, 10, 20 and 40 kg N ha(-1) year(-1)) on the bog plants and surface peat at different depths (i.e. 0, 5, 10, 20 and 40 cm) by using 15N as tracer. Plants and peat were analyzed for N concentration, 15N natural abundance and 15N at.%. From the results we draw three main conclusions: First, the relative importance of different N sources is species-specific among bog plants. Second, an annual addition of 5 kg N ha(-1) year(-1) was sufficient to significantly increase the N concentration in Sphagnum mosses, liverworts and shallow rooted vascular plants, and an annual addition of 40 kg N ha(-1) year(-1) during 3 years was not sufficient to increase the N concentration in deep rooted plants, although the 15N content increased continuously, indicating a possible longer term effect. Third, an annual addition of 40 kg N ha(-1) year(-1) during 3 years increased the N content in surface peat at depths of 5 and 10 cm, but not at depths of 20 and 40 cm, indicating the capacity of the living Sphagnum mosses and the surface peat to take up deposited N, and thereby function as a filter.     

Removal of heavy metals from a metaliferous water solution by Typha latifolia plants and sewage sludge compost

Typha latifolia plants, commonly known as cattails, were grown in a mixture of mature sewage sludge compost, commercial compost and perlite (2:1:1 by volume). Four Groups (A, B, C and D) were irrigated (once every two weeks) with a solution containing different concentrations of Cu, Ni, and Zn, where in the fifth (group M) tap water was used. At the end of the 10 weeks experimental period substrate and plants were dried, weighed and analysed for heavy metals. The amounts of all three metals removed from the irrigation solution, were substantial. In the roots and leaves/stems of T. latifolia the mean concentration of Zn reached values of 391.7 and 60.8 mg/kg of dry weight (d.w.), respectively. In the substrate of Group D all three metals recorded their highest mean concentrations of 1156.7 mg/kg d.w. for Cu, 296.7 mg/kg d.w. for Ni and 1231.7 mg/kg d.w. for Zn. Linear correlation analyses suggested that there was a linear relationship between the concentration of metals in the solutions and the concentration of metals in the substrates at the end of the experiment. The percentage removal of the metals in the substrate was large, reaching 100% for Cu and Zn in some groups and almost 96% for Ni in group D. The total amount of metals removed by the plants was considerably smaller than that of the substrate, due mainly to the small biomass development. A single factor ANOVA test (5% level) indicated that the build up in the concentration of metals in the roots and the leaves/stems was due to the use of metaliferous water solution and not from the metals pre-existing in the substrate. The contribution of the plants (both roots and leaves/stems) in the removing ability of the system was less than 1%.     

The role of humic substances in chromium sorption onto natural organic matter (peat)

To elucidate mechanisms of Cr³⁺ sorption onto the unaltered solid natural organic matter, the comparative studies of this ion binding from a solution at pH 4.0 onto three selected particle size fractions: 2000–1000 μm, 630–200 μm and 63–20 μm of markedly different HS content and structure, separated by a wet sieving from an overall sample of peat (Brushwood Peat Humus) were carried out. Comparable patterns of COOH groups and CEC_t confirmed that for cation exchange capacity were responsible mainly cations connected with COO⁻ functional groups. It was though found that aliphatic acids in the solid state did not take part in Cr³⁺ binding, thus the finest studied fraction 63–20 μm of the highest contents of functional groups showed the lowest sorption capacity for Cr³⁺, while similar patterns of sorbed Cr³⁺, soluble HS content and base CEC₀ indicated that these parameters were directly interrelated. The base ion exchange processes determined by CEC₀ (with Ca²⁺ as a predominant exchangeable cation) appeared to be not the major mechanisms responsible for Cr³⁺ sorption. For this metal, strong binding to insoluble large molecular weight organic pool two- to threefold prevailed over the ion exchange processes. Very low acid desorption indicated generally low mobility of Cr³⁺-organic compounds.     

Copper complexation by tannic acid in aqueous solution

The speciation of titrated copper in a dissolved tannic acid (TA) solution with an initial concentration of 4 mmol organic carbon (OC)/l was investigated in a nine-step titration experiment (Cu/OC molar ratio = 0.0030–0.0567). We differentiated between soluble and insoluble Cu species by 0.45 μm filtration. Measurements with a copper ion selective electrode (ISE) and diffusive gradients in thin films (DGT) were conducted to quantify unbound Cu(II) cations (‘free’ Cu) and labile soluble Cu complexes. For the DGT measurements, we used an APA hydrogel and a Chelex 100 chelating resin (Na form). Insoluble organic Cu complexes (>0.45 μm) was the dominant Cu species for Cu/OC = 0.0030–0.0567 with a maximum fraction of 0.96 of total Cu. At Cu/OC > 0.0100, Cu-catalysed degradation of aggregate structures resulted in a strong increase of free Cu and (labile) soluble Cu complexes with a maximum fraction of 0.28 and 0.32 of total Cu, respectively. Labile (i.e. DGT-detectable) soluble Cu complexes had a relatively high averaged diffusion coefficient (D) in the APA hydrogel (3.50 × 10⁻⁶– 5.58 × 10⁻⁶ cm² s⁻¹).