Critical review of the building downwash algorithms in AERMOD

The only documentation on the building downwash algorithm in AERMOD (American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model), referred to as PRIME (Plume Rise Model Enhancements), is found in the 2000 A&WMA journal article by Schulman, Strimaitis and Scire. Recent field and wind tunnel studies have shown that AERMOD can overpredict concentrations by factors of 2 to 8 for certain building configurations. While a wind tunnel equivalent building dimension study (EBD) can be conducted to approximately correct the overprediction bias, past field and wind tunnel studies indicate that there are notable flaws in the PRIME building downwash theory. A detailed review of the theory supported by CFD (Computational Fluid Dynamics) and wind tunnel simulations of flow over simple rectangular buildings revealed the following serious theoretical flaws: enhanced turbulence in the building wake starting at the wrong longitudinal location; constant enhanced turbulence extending up to the wake height; constant initial enhanced turbulence in the building wake (does not vary with roughness or stability); discontinuities in the streamline calculations; and no method to account for streamlined or porous structures.

Implications: This paper documents theoretical and other problems in PRIME along with CFD simulations and wind tunnel observations that support these findings. Although AERMOD/PRIME may provide accurate and unbiased estimates (within a factor of 2) for some building configurations, a major review and update is needed so that accurate estimates can be obtained for other building configurations where significant overpredictions or underpredictions are common due to downwash effects. This will ensure that regulatory evaluations subject to dispersion modeling requirements can be based on an accurate model. Thus, it is imperative that the downwash theory in PRIME is corrected to improve model performance and ensure that the model better represents reality.     

Atrazine contamination in agricultural soils from the Yangtze River Delta of China and associated health risks

Atrazine is one of the most widely applied and persistent herbicides in the world. In view of limited information on the regional contamination of atrazine in soils in China, this study investigated the spatial distribution and environmental impacts of atrazine in agricultural soils collected from the Yangtze River Delta (YRD) as an illustrative analysis of rapidly developing regions in the country. The results showed that the concentrations of atrazine in the YRD agricultural soils ranged from <1.0 to 113 ng/g dry weight, with a mean of 5.7 ng/g, and a detection rate of 57.7 % in soils. Pesticide factory might be a major source for the elevated levels of atrazine in Zhejiang Province. The contamination of atrazine was closely associated with land use types. The concentrations and detection rates of atrazine were higher in corn fields and mulberry fields than in rice paddy fields. There was no significant difference in compositions of soil microbial phospholipids fatty acids among the areas with different atrazine levels. Positive relationship (R = 0.417, p < 0.05, n = 30) was observed between atrazine and total microbial biomass. However, other factors, such as soil type and land management practice, might have stronger influences on soil microbial communities. Human health risks via exposure to atrazine in soils were estimated according to the methods recommended by the US EPA. Atrazine by itself in all the soil samples imposed very low carcinogenic risks (<10^?6) and minimal non-cancer risks (hazard index <1) to adults and children.     

Why social values cannot be changed for the sake of conservation

The hope for creating widespread change in social values has endured among conservation professionals since early calls by Aldo Leopold for a “land ethic.” However, there has been little serious attention in conservation to the fields of investigation that address values, how they are formed, and how they change. We introduce a social–ecological systems conceptual approach in which values are seen not only as motivational goals people hold but also as ideas that are deeply embedded in society's material culture, collective behaviors, traditions, and institutions. Values define and bind groups, organizations, and societies; serve an adaptive role; and are typically stable across generations. When abrupt value changes occur, they are in response to substantial alterations in the social–ecological context. Such changes build on prior value structures and do not result in complete replacement. Given this understanding of values, we conclude that deliberate efforts to orchestrate value shifts for conservation are unlikely to be effective. Instead, there is an urgent need for research on values with a multilevel and dynamic view that can inform innovative conservation strategies for working within existing value structures. New directions facilitated by a systems approach will enhance understanding of the role values play in shaping conservation challenges and improve management of the human component of conservation.     

Carbon fluxes from coarse woody debris in southern taiga forests of the Valdai Upland

Studies in three typical forest biotopes of the Valdai Upland were performed to evaluate the stocks and surface area of coarse woody debris from spruce and birch (in linear transects), its colonization by xylotrophic fungi (during reconnaissance surveys), and CO₂ emission (by a chamber method). The stock and surface area were minimum in a paludal birch forest (46.4 m³/ha and 960 m²/ha) and maximum in a decay area of spruce forest (256.1 m³/ha and 3761 m²/ha, respectively). The assemblages of wood-decay fungi had a composition typically found in southern taiga forests. The total CO₂ flux varied from 145 kg C-CO₂/ha per year in the paludal birch forest to 462 kg C-CO₂/ha per year in small herb–green moss spruce forest. It is concluded that air temperature is an informative predictor of seasonal C-CO₂ flux rate from coarse woody debris.     

Ultrasound effects on the activity of Aspergillus niger lipases in their application in dairy wastewater treatment

We evaluated the effect of ultrasound radiation on lipase activity. The experiments were conducted using a low‐cost crude enzyme extract. We then used this lipase to treat dairy effluent. The results of our study presented an increase of approximately 430% in the concentration of free fatty acids.     

Minimizing disruptions caused by damming and ensuring the health of downstream ecosystems

In view of the Brazilian Ten‐Year Energy Expansion Plan 2021, this article presents a discussion on environmental flow (e‐flow). The authors analyze the literature to show the evolution of publications concerning e‐flow releases from the perspective of ecosystems services preservation considering results from different case studies from throughout the world. Finally, two main recommendations are drawn regarding e‐flow are: (1) performing a holistic approach to e‐flow planning, including hydrological, hydraulic, water quality, habitat, and riparian zone considerations; and (2) installing in new structures adequate bottom outlets to allow a range of adjustable e‐flow from reservoir dams to reproduce natural flow variations.     

Comparing Costs of Onsite Best Management Practices to Nutrient Credits for Stormwater Management: A Case Study in Virginia

Best management practices (BMPs) are widely used to mitigate impacts of increased impervious surfaces on stormwater runoff. However, there is limited detailed and up‐to‐date information available on the cost of designing, constructing, and maintaining BMPs over their lifetime. The objective of this study is to analyze BMPs recently constructed by the Virginia Department of Transportation (VDOT) to quantify their total cost per pound of phosphorus removed annually. A motivating factor for the study is recent changes to regulatory guidelines in Virginia which allow for full or partial substitution of purchased nutrient credits in lieu of constructing onsite BMPs to achieve compliance with stormwater quality regulations. Results of the analysis of nine BMPs found their cost ranged from $20,100 to $74,900, in 2014 dollars, per pound ($44,313‐$165,126 per kg) of phosphorus removed. Based on these results and assuming current credit prices procured by VDOT, purchasing nutrient credits is a cost‐effective option for the agency, especially when factoring in the cost of additional right of way for the BMP. Based on this finding, we expect compliance with stormwater quality regulations through credit purchases to become more widely used in Virginia. Moving forward, we suggest more direct tracking of BMP costs to support comparisons between BMP costs across a range of types and conditions to credit purchases for meeting stormwater regulations.     

A Comprehensive Python Toolkit for Accessing High‐Throughput Computing to Support Large Hydrologic Modeling Tasks

The National Flood Interoperability Experiment (NFIE) was an undertaking that initiated a transformation in national hydrologic forecasting by providing streamflow forecasts at high spatial resolution over the whole country. This type of large‐scale, high‐resolution hydrologic modeling requires flexible and scalable tools to handle the resulting computational loads. While high‐throughput computing (HTC) and cloud computing provide an ideal resource for large‐scale modeling because they are cost‐effective and highly scalable, nevertheless, using these tools requires specialized training that is not always common for hydrologists and engineers. In an effort to facilitate the use of HTC resources the National Science Foundation (NSF) funded project, CI‐WATER, has developed a set of Python tools that can automate the tasks of provisioning and configuring an HTC environment in the cloud, and creating and submitting jobs to that environment. These tools are packaged into two Python libraries: CondorPy and TethysCluster. Together these libraries provide a comprehensive toolkit for accessing HTC to support hydrologic modeling. Two use cases are described to demonstrate the use of the toolkit, including a web app that was used to support the NFIE national‐scale modeling.     

Method for Rapidly Assessing the Overtopping Risk of Bridges Due to Flooding over a Large Geographic Region

Hydraulic events are a leading cause of bridge failures. While these hydraulic events are accounted for in bridge design, changing environmental and land use conditions require continual updating of this risk. For example, after a bridge has been constructed, streamflow can change in unanticipated ways as a result of land use changes, geomorphic changes, and climate change. The objective of this research was to create a screening method able to quickly and inexpensively estimate overtopping risk across a collection of bridges based on the current streamflow conditions. The method uses a geographic information system, nationally available and standardized datasets, and recent regression equations to quantify bridge vulnerability to overtopping for flooding with varying return periods. This screening method could also be used to assist decision makers in updating the Waterway Adequacy field in the National Bridge Inventory, which indicates the overtopping risk of bridges. The method was applied to a portion of the Hampton Roads region of Virginia, United States that includes 475 bridges. The results of the analysis, when combined with transportation data for bridges, aid decision makers to assign further resources to complete more detailed analyses of bridges identified as being at risk for overtopping.