Fate and movement of atrazine, cyanazine, metolachlor and selected degradation products in water resources of the deep Loess Hills of Southwestern Iowa, USA

The environmental fate and movement of herbicides widely used for weed control in corn are assessed for a deep loess soil in southwestern Iowa. Beginning in the early 1980s, the herbicide-based weed control program emphasized the application of atrazine (ATR) or cyanazine (CYN) and metolachlor (MET) for both broadleaf and grass control. Between 1992 and 1995, concentrations of ATR, desethylatrazine (DEA), desisopropylatrazine (DIA), CYN and MET were measured in rainwater, both shallow and deep vadose zone water, and well water. Results show that the frequency of herbicide detections and the range and distribution of occurrences are dependent upon both landscape position and temporal inputs of recharge water from rainfall. Generally, DIA was observed more frequently and in higher mean concentration in well water than DEA, while DEA was observed more frequently than DIA in vadose zone groundwater. A chromatographic analogy is suggested to explain the occurrence patterns observed for both parent herbicide and degradation products within the unsaturated zone water. Analysis of rainwater samples collected during this time also revealed low concentrations of ATR, CYN and MET, with the timing of the detections indicative of non-local transport. Results show that the deep loess soil conducts both water and agricultural chemicals relatively rapidly and as such represents a production system which is vulnerable to contamination of shallow groundwater by herbicide-derived chemicals. Results also illustrate the importance of including major herbicide degradation products in water resource impact assessment studies.     

A catalogue of urban hydrocarbons for the city of Leeds: atmospheric monitoring of volatile organic compounds by thermal desorption-gas chromatography

A method has been developed for the speciation and quantitative determination of hydrocarbons in urban air in the city of Leeds. Hydrocarbons were pre-concentrated by adsorbent tube air sampling and analyzed using thermal desorption and gas chromatography with flame ionization detection and structural confirmation by mass spectrometric detection. While automated volatile organic compound (VOC) analyzers produced data for a maximum of about 30 compounds simultaneously, with the method described here, a total of 68 C6-C12 hydrocarbons were measured simultaneously in one analysis at parts per billion (ppb) levels. Several monitoring surveys were performed, one during the winter of 1993 and the other in the summer of 1994, at a number of sites to investigate the levels of VOCs identified in the urban air of Leeds.     

Soil properties and crop productivity as influenced by flyash incorporation in soil

Field experiments were carried out during 1996–97at Gulawathi, Muthiani and Salarpur Villages, IARI Farm, NewDelhi and NCPP Campus, Dadri to evaluate changes in soilcharacteristics and growth of wheat (Triticum aestivum L.),mustard (Brassica juncea L.), lentil (Lence esculentaMoench.), rice (Oryza sativa L.) and maize (Zea mays L.) byvarying amounts of flyash addition (up to 50t ha^-1) in soils atsowing/transplanting time of crops. Flyash addition in areasadjoining NCPP Thermal Power Plant, Dadri, Ghaziabad, U.P.ranged from 5–12 t ha^-1 yr^-1 in 1995–96. Shoot and root growthand yield of test crops at different locations after flyashincorporation resulted in beneficial effects of flyashaddition in most cases. The silt dominant texture of flyashimproved loamy sand to sandy loam textures of the surfacesoils at the farmers' fields. The increased growth in yield ofcrops with flyash incorporation was possibly due tomodifications in soil moisture retention and transmissioncharacteristics, bulk density, physico-chemical characterssuch as pH and EC and organic carbon content. The response offlyash addition in the soil on soil health and cropproductivity needs to be evaluated on long-term sustainableaspects.     

A Metamodeling Approach for Integrated Assessment of Air Quality Policies

A method is proposed to build integrated models (also called Metamodels) aimed at quantifying the economic efficiency of air quality policies. This Metamodeling approach is based on the coupling of two complementary models, that operate at different scales in space and time, and which represent the economic and the physical and chemical processes, respectively. The joint consideration of the physico-chemical and techno-economic structure of the pollution control problems permits a comprehensive evaluation of air pollution abatement strategies. The motivating pollution control problems include urban-regional air quality management through efficient energy and traffic control policies. A pilot study, exploiting data collected in the Geneva canton (Switzerland), is used to demonstrate the potential of the approach.     

Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Phytomonitoring and management of tar piles on the Qatari coastal marshes, Arabian Gulf

Most of the shores in Qatar and other oil producing countries have had a long history of crude oil pollution from different sources. This pilot study was to assess the problem and suggest a management programme for disposing of the collected tar or lessening the impact of tar accumulation. The vegetation on the sites used for dumping tar was used in a field survey to identify bioindicators of tar pollution and of the natural recovery of polluted sites. The phytomonitoring results indicate that recovery of polluted sites can be quite rapid after clean-up and restoration. To facilitate natural plant invasion and colonization, and the restoration of tar piles, the dumping sites must have plant communities with high species diversity and a high percentage of annual plants. Depending on the sand-tar ratio in the piles, artificial seeding of selected plant species (listed) can be applied by using species mixes or single species seeding. Management techniques are suggested to optimize the natural recovery and revegetation of tar-affected coastal marshes.     

Uranium enrichment by the separation-nozzle process

The Science of Nature - The development of reliable manufacturing methods for commercial separation elements, the successful operation of separative stages, and extensive tests performed on plant...     

Ecoprofit-Styria-prepare Thirteen pollution prevention case studies in the Styrian industry

The paper focuses upon the organization of a federal state-funded pollution prevention project in the Styrian industry. The project includes 13 companies from the textile, pulp and paper, machine building, wood working and printed circuit board manufacturing industries, covering most of the sectors and sizes in the Styrian industry. It started in January 1994 and will last for one year. It will demonstrate the possibilities of pollution prevention and the need for further research work. This project will make use of the methods and tools that were refined in the Austrian Prepare project. As a first step, a systematic balance of all the inputs and outputs of a company is made, after which the weak points and inefficiencies of material and energy use are identified and the options for improvements, both economical and ecological, are defined. Consequently, modifications in products and production lead to a situation with less waste and emissions. The preliminary lessons from these projects are presented: as a rule, the utilities (consumption of process materials and water, cleaning, energy, preparatory and finishing steps) are treated as black boxes and usually represent a considerable optimization potential. In these areas especially there is usually a lack of information and coordination as well as a need for a systematic and comprehensive approach. Leadership in the company and creative consultants are needed for starting lasting successful pollution prevention projects.     

Biologie und Biochemie des Elements Selen

The importance of selenium as an essential trace element has progressively emerged during the last years due to the analysis of selenium deficiency diseases and to the identification and characterization of a number of selenoenzymes. Selenium is incorporated in the catalytic site of the enzymes as an integral selenocysteine residue. The pathway of selenocysteine biosynthesis and incorporation has been elucidated recently for Escherichia coli. This article presents an overview on these subjects and describes the mechanisms which confer selenocysteine specificity in the framework of protein biosynthesis. In addition, some considerations concerning the phylogeny of selenocysteine incorporation are presented and a model for the evolution of the selenocysteine pathway is proposed.