Impact of soluble organic matter and particulate organic matter on anammox system: Performance,microbial community and N2O production

In this study,the effects of soluble readily biodegradable COD (sCOD) and particulate slowly biodegradable COD (pCOD) on anammox process were investigated.The results of the longterm experiment indicated that a low sCOD/N ratio of 0.5 could accelerate the anammox and denitrification activity,to reach as high as 84.9%±2.8% TN removal efficiency.Partial denitrification-anammox (PDN/anammox) and denitrification were proposed as the major pathways for nitrogen removal,accounting for 91.3% and 8.7% o...     

Changes in the central and peripheral circulatory system in response to the cold: own studies using impedance plethysmography and Doppler ultrasound

The aim of the study was to determine the cardiovascular response to continuous (4 °C for 60 min) and intermittent (10 min at 4?°C and 10 min at room temperature alternately) exposure to the cold in 30 healthy young men. The subjects were equipped with a set of identical clothing (insulation 2.1 clo) and during the stay in the chamber and outside performed the same activities, i.e., walking on a treadmill at a speed of 0.5?km/h. The tests included assessing the central circulatory system using the Holter system and assessing the peripheral circulatory system using impedance plethysmography and Doppler ultrasound. The analysis of the parameters that describe the central and peripheral circulation poses a difficulty in determining which variant of exposure constitutes a greater load on the circulatory system. It should be noted that even the conditions used in the study may cause adverse effects in the cardiovascular system.     

Repeatability of a dynamic rollover test system

Objective: The goal of this study was to characterize the rollover crash and to evaluate the repeatability of the Dynamic Rollover Test System (DRoTS) in terms of initial roof-to-ground contact conditions, vehicle kinematics, road reaction forces, and vehicle deformation.

Methods: Four rollover crash tests were performed on 2 pairs of replicate vehicles (2 sedan tests and 2 compact multipurpose van [MPV] tests), instrumented with a custom inertial measurement unit to measure vehicle and global kinematics and string potentiometers to measure pillar deformation time histories. The road was instrumented with load cells to measure reaction loads and an optical encoder to measure road velocity. Laser scans of pre- and posttest vehicles were taken to provide detailed deformation maps.

Results: Initial conditions were found to be repeatable, with the largest difference seen in drop height of 20 mm; roll rate, roll angle, pitch angle, road velocity, drop velocity, mass, and moment of inertia were all 7% different or less. Vehicle kinematics (roll rate, road speed, roll and pitch angle, global Z′ acceleration, and global Z′ velocity) were similar throughout the impact; however, differences were seen in the sedan tests because of a vehicle fixation problem and differences were seen in the MPV tests due to an increase in reaction forces during leading side impact likely caused by disparities in roll angle (3° difference) and mass properties (2.2% in moment of inertia [MOI], 53.5 mm difference in center of gravity [CG] location).

Conclusions: Despite those issues, kinetic and deformation measures showed a high degree of repeatability, which is necessary for assessing injury risk in rollover because roof strength positively correlates with injury risk (Brumbelow 2009). Improvements of the test equipment and matching mass properties will ensure highly repeatable initial conditions, vehicle kinematics, kinetics, and deformations.     

Technologies for deodorization of malodorous gases

There is an increasing number of citizens’ complaints about odor nuisance due to production or service activity. High social awareness imposes pressure on entrepreneurs and service providers forcing them to undertake effective steps aimed at minimization of the effects of their activity, also with respect to emission of malodorous substances. The article presents information about various technologies used for gas deodorization. Known solutions can be included into two groups: technologies offering prevention of emissions, and methodological solutions that enable removal of malodorous substances from the stream of emitted gases. It is obvious that the selection of deodorization technologies is conditioned by many factors, and it should be preceded by an in-depth analysis of possibilities and limitations offered by various solutions. The aim of the article is presentation of the available gas deodorization technologies as to facilitate the potential investors with selection of the method of malodorous gases emission limitation, suitable for particular conditions.

     

Shell deformations in the Baltic clam Macoma balthica from southern Baltic Sea (the Gulf of Gdansk): hypotheses on environmental effects

High-resolution digital photography and graphical image analyses systems have been used to define external morphometric characters of shell deformations in four populations of the Baltic clam Macoma balthica from the Gulf of Gdansk (southern Baltic Sea). The proposed shell deformation indices (SDI), which were based on the relationship of selected dimensions in the posterior and the anterior part of the shell, showed at least three morphological features that provide a distinctive diagnosis of "regular" and "deformed" clams: the presence of flexure on the posterior side (SDI1), elongated posterior region (SDI2), and shell growth (SDI3). The degree and prevalence of deformed clams varied locally over space. Increase in percentage contribution of aberrated shells with depth, corresponding to oxygen depletion profile in the Gulf, suggests low oxygen concentrations as the main agent exerting a deforming influence. The observed morphological aberrations developed with age (size) of a bivalve, suggesting a long-term effect of causal factors, and were accompanied by lightening shell weight, possibly due to decalcification of previously deposited calcareous material during anaerobic metabolism. It is hypothesized that hypoxic/anoxic conditions and a subsequent presence of hydrogen sulfide on a deep organic-rich sea bottom induce shell form alterations that enable the pumping of oxygenated water from above the anoxic layer. Such a morphological modification highlights the functional significance of shell deformations in protective response to the ambient low-oxygen concentrations. Sediment organotin concentrations fall within moderate to high contamination range and, therefore, may also have an adverse impact on the shell form. DNA analyses of the fragment of mitochondrial gene cytochrome oxidase I (COI, 393 base pairs) showed homogenous genetic structure of regular and deformed clams, indicating that shell deformations in M. balthica are primarily driven by acclimatization to the ambient environmental conditions.     

Relationships and bioaccumulation of chemical elements in the Baikal seal (Phoca sibirica)

Concentrations of Al, Ba, Cd, Cu, Fe, Mn, Mo, Si, Sr, Zn, Ca, K, Mg, Na and P in the livers of Baikal seal, plankton, zoobenthos, and fish, constituting the food sources for the seals, were determined by ICP-MS and ICP-AES. The accumulation of elements in the liver of seals, affected by internal and external (environmental) factors, was assessed by multidimensional (ANOVA, FA) and correlation analyses. FA has enabled identification of abiotic and biotic factors responsible for the accumulation of elements in the livers of Baikal seals. Significant influence of sex and development stage of the seals analysed on hepatic concentrations of some elements was found. The observed differences in element concentrations between pups, males and females could be attributable to the reproductive cycle of this species. ANOVA showed differences in concentrations of Fe, Zn, Cu and Cd in seals from the three separate basins of the lake. BMFs suggest biomagnification of Fe and Zn in the fish-seal trophic link.     

Effects of cadmium and zinc on larval growth and survival in the ground beetle,Pterostichus oblongopunctatus

Carabid beetles, like Pterostichus oblongopunctatus, living in metal contaminated areas may be exposed to elevated levels of metals within their diets. However, when compared to other second order consumers, they have one of the lowest observed levels of metals, indicating methods of detoxification to deal with such toxicants. In this study, we investigated if chronic, multigenerational exposure to metals leads to resistance to toxic metal concentrations, and if so, what are the costs associated with them. Adult organisms were collected from two sites, a polluted and a reference site near Olkusz, in southern Poland. These adults were immediately mated, and eggs were collected twice weekly to assess the effects in the larvae of the F(1) generation. Larvae were randomly exposed to one of four artificial mediums: control, 50 mg kg(-1) Cd, 500 mg kg(-1) Zn, and a combined treatment of 50 mg kg(-1) Cd and 500 mg kg(-1) Zn to investigate possible interactions. Individuals were sacrificed at 10, 30, and 40 days. Although metals were not accumulated in larvae (p>0.05), larvae fed the Cd or the Zn treatment grew significantly slower, and had the lowest survival rate (p<0.05) in respect to control. Out of metal treated animals, those on the combined treatment of CdZn grew the quickest and had the highest observed survival (p<0.05). Although previous studies have demonstrated changes in adult population parameters under chronic, multigeneration exposure to toxic metal concentrations, our study did not reveal any changes in the larval stage.     

Chromium occurrence in the environment and methods of its speciation

This article includes a survey of chromium (Cr) occurrence in different environmental compartments, its pathways in the environment and the cross-sectional presentation of Cr speciation methods against the background of Cr chemistry. The aim of the article is to demonstrate that knowledge of interconversion processes between different Cr forms is necessary to understand its behaviour and role in the environment, in addition to enabling reliable Cr speciation analysis to be performed. The current methods of Cr speciation are presented, characterized and their usefulness discussed. These must rely on superior separation and detection capabilities since Cr in environmental compartments is mostly at trace or ultra-trace level. The need for using unique techniques of sampling, storage, handling and separation for Cr speciation is documented.     

Toxicity of metalaxyl,azoxystrobin, dimethomorph,cymoxanil, zoxamide and mancozeb to Phytophthora infestans isolates from Serbia

A study of the in vitro sensitivity of 12 isolates of Phytophthora infestans to metalaxyl, azoxystrobin, dimethomorph, cymoxanil, zoxamide and mancozeb, was conducted. The isolates derived from infected potato leaves collected at eight different localities in Serbia during 2005–2007. The widest range of EC₅₀ values for mycelial growth of the isolates was recorded for metalaxyl. They varied from 0.3 to 3.9 μg mL^?1 and were higher than those expected in a susceptible population of P. infestans. The EC₅₀ values of the isolates were 0.16–0.30 μg mL^?1 for dimethomorph, 0.27–0.57 μg mL^?1 for cymoxanil, 0.0026–0.0049 μg mL^?1 for zoxamide and 2.9–5.0 μg mL^?1 for mancozeb. The results indicated that according to effective concentration (EC₅₀) the 12 isolates of P. infestans were sensitive to azoxystrobin (0.019–0.074 μg mL^?1), and intermediate resistant to metalaxyl, dimethomorph and cymoxanil. According to resistance factor, all P. infestans isolates were sensitive to dimethomorph, cymoxanil, mancozeb and zoxamide, 58.3% of isolates were sensitive to azoxystrobin and 50% to metalaxyl. Gout's scale indicated that 41.7% isolates were moderately sensitive to azoxystrobin and 50% to metalaxyl.