Chemical-sensory characterization of dairy manure odor using headspace solid-phase microextraction and multidimensional gas chromatography mass spectrometry-olfactometry

Livestock operations are associated with emissions of odor, gases, and particulate matter. The majority of previous livestock odor studies focused on swine operations whereas relatively few relate to dairy cattle. Identifying the compounds responsible for the primary odor impact is a demanding analytical challenge because many critical odor components are frequently present at very low concentrations within a complex matrix of numerous insignificant volatiles. The objective of this study was to describe a chemical-sensory profile of dairy manure odor using headspace solid-phase microextraction (HS-SPME) and multidimensional gas chromatography-mass spectrometry-olfactometry (MDGC-MS-O). Two analytical approaches were used: (1) HS-SPME time-series extractions (from seconds up to 20 hr) followed by gas chromatography-mass spectrometry-olfactometry (GC-MS-O) analyses, and (2) relatively short HS-SPME extractions (30 min) followed by MDGC-MS-O analyses on selected chromatogram heart-cuts. Dairy manure was collected at research dairy farms in the United States and Israel. Volatile organic compounds (VOCs) resolved from multiple analyses included sulfur-containing compounds, volatile fatty acids, ketones, esters, and phenol/indole derivatives. A total of 86 potential odorants were identified. Of them, 17 compounds were detected by the human nose only. A greater number of VOCs and odorous compounds were detected, as well as higher mass loading, on solid-phase microextraction (SPME) fibers observed for longer extractions with SPME. However, besides sulfur-containing compounds, other selected compounds showed no apparent competition and displacement on the SPME fiber. The use of MDGC-MS-O increased chromatographic resolution even at relatively short extractions and revealed 22 additional odorants in one of the regions of the chromatogram. The two analytical approaches were found to be parallel to some extent whereas MDGC-MS-O can also be considered as a complementary approach by resolving more detailed chemical-sensory odor profiles.     

Estimation of autotrophic maximum specific growth rate constant--experience from the long-term operation of a laboratory-scale sequencing batch reactor system

The autotrophic maximum specific growth rate constant, muA,max, is the critical parameter for design and performance of nitrifying activated sludge systems. In literature reviews (i.e., Henze et al., 1987; Metcalf and Eddy, 1991), a wide range of muA,max values have been reported (0.25 to 3.0 days(-1)); however, recent data from several wastewater treatment plants across North America revealed that the estimated muA,max values remained in the narrow range 0.85 to 1.05 days(-1). In this study, long-term operation of a laboratory-scale sequencing batch reactor system was investigated for estimating this coefficient according to the low food-to-microorganism ratio bioassay and simulation methods, as recommended in the Water Environment Research Foundation (Alexandria, Virginia) report (Melcer et al., 2003). The estimated muA,max values using steady-state model calculations for four operating periods ranged from 0.83 to 0.99 day(-1). The International Water Association (London, United Kingdom) Activated Sludge Model No. 1 (ASM1) dynamic model simulations revealed that a single value of muA,max (1.2 days(-1)) could be used, despite variations in the measured specific nitrification rates. However, the average muA,max was gradually decreasing during the activated sludge chlorination tests, until it reached the value of 0.48 day(-1) at the dose of 5 mg chlorine/(g mixed liquor suspended solids x d). Significant discrepancies between the predicted XA/YA ratios were observed. In some cases, the ASM1 predictions were approximately two times higher than the steady-state model predictions. This implies that estimating this ratio from a complex activated sludge model and using it in simple steady-state model calculations should be accepted with great caution and requires further investigation.     

Biomagnification of mercury in trophic relation of Great Cormorant (Phalacrocorax carbo) and fish in the Vistula Lagoon, Poland

Total mercury (Hg) concentrations were determined by CV-AAS in selected tissues (liver, kidney, and muscle) of the Great Cormorant and some fish species (herring, ruffe, European smelt, tench, roach, Crucian carp, and Prussian carp) from the Vistula Lagoon ecosystem (Poland). Significant correlations between Hg concentrations in the kidneys and muscle of cormorants (U test, p?<?0.05) were found; levels of the metal were highest in the birds?? liver and kidneys. Total Hg concentrations in the fish decreased in the following order: roach > Prussian carp > Crucian carp > tench > European smelt > ruffe > herring. The biomagnification factor of Hg for the cormorant relative to the fish decreased in the following sequence: herring > ruffe > European smelt > tench > Crucian carp > roach = Prussian carp. It was significantly greater than unity, especially for the cormorant?Cherring trophic relationship. This implies that Hg is biomagnified in the cormorant in relation to its prey.     

Playing Pollution Games with Thermal Electricity Generators

This paper discusses the economic and environmental implications of a stylised electricity market with transmission grid constraints and shared temporal pollution standards that restrict the joint strategy space of the agents. These are problematic to enforce if individual monitoring is impossible or very expensive. For such situations, we propose a time-dependent (or “open-loop dynamic”), game-theoretic model capable of analysing coupled constraints equilibria, also known as generalised Nash. We compute these equilibria for thermal generators subjected to annual pollution limits and instantaneous grid restrictions for a three-node dc model with a two-period load duration curve. The model illustrates the possibility that well-meaning environmental regulation might harm consumer surplus. It also highlights the cost to efficiency of regulatory attempts to ease the burden of compliance.     

Chlorfenvinphos Dermal Absorption in Rats: Histological and Ultrastructural Changes in the Skin and Internal Organs

We studied the effect of chlorfenvinphos dermal absorption on the morphological picture of blood, on the histological and fine structure of tail skin, and on the histological structure of internal organs (lungs, heart, liver, spleen, and kidney) of rats. This study was conducted on 25 white Wistar rats, the tail skin of which was—or was not—hydrated before exposure. Rat tails were soaked in 0.5% or 0.05% chlorfenvinphos for 1 hr day for 3 months. Evident tendencies for a decrease in the absolute level of leukocytes and for an increase in the absolute level of erythrocytes in all experimental animals were observed. Histopathological changes in the internal organs were mildly manifested in only a few rats, mainly as liver and pulmonary hyperaemia. Rat tail skin at the direct exposure site showed hyperceratosis, intensive desquamation, and compensatory hyperplasia.     

Occupational Exposure to Harmful Chemical Substances While Processing Phenol-Formaldehyde Resins

Air pollutants emitted while processing phenol-formaldehyde resins have been investigated. Gas chromatography-mass-selective detection was used to separate and identify chemical compounds. It was determined that workers were exposed to formaldehyde in all workplaces. Besides, phenol, acetaldehyde, acrylaldehyde, 2-furaldehyde, xylene, ethylbenzene, toluene, tetrachlorethene, ethyl acetate, butyl acetate were found during the production of frictional materials; and 2-furaldehyde, phenol, naphthalene, 2-furan-methanol, polycyclic aromatic hydrocarbons (PAHs) during the production of abrasive materials. Quantitative analyses were performed with gas chromatogra-phy and high performance liquid chromatography. Assessment of occupational exposure indicated that chemical compounds emitted during the investigated processes might be dangerous for human health, mainly because of suspected carcinogenic compounds: formaldehyde and PAHs.     

Solid State Reactions of Potato Starch with Urea and Biuret

Reaction of granular potato starch with urea and biuret resulted in the formation of products, which were soluble neither in cold nor boiling water. The net reaction was a monosubstitution of the hydrogen atom in one hydroxyl group in each D-glucose unit of starch with the either CO–NH₂ or CO–NH–CO–NH₂ moiety, respectively. Properties of the products, particularly these with urea, depended on the mode of reaction. Reactions were carried out in the microwave oven as well as with convection heating. The products retained the granular form of starch but a vast majority of granules were damaged. -Amylolysis of those materials revealed that their susceptibility to the enzyme increasing in the order: starch-amylolysis with simultaneous insolubility in water make these products suitable as ruminant fodder and, eventually, biodegradable material.     

Overexpression of LCT1 in tobacco enhances the protective action of calcium against cadmium toxicity

Wheat cDNA LCT1, a nonspecific transporter for Ca2+, Cd2+, Na+ and K+, was overexpressed in tobacco. Transformants were tested for their sensitivity to a range of Ca2+-concentrations [0.01-10 mM Ca(NO3)2] with or without the presence of 0.05 mM Cd(NO3)2. Calcium and cadmium accumulation was also determined. LCT1-transformed plants expressed a phenotype distinct from controls only under conditions of low calcium (0.01-1 mM Ca2+). They grew significantly better and had slightly higher shoot calcium concentration. Transformants subjected to 0.05 mM Cd(NO3)2 in the presence of 1 mM Ca2+ displayed a substantially higher level of tolerance to cadmium and accumulated less Cd in roots. These results are the first to demonstrate the involvement of LCT1 in calcium acquisition and in the regulation of amelioration of Cd-toxicity by calcium.     

Levels of lead in atmospheric deposition in a large urban agglomeration in Poland

Lead levels in wet and dry deposition were determined within this project. A network of 10 sampling stations was established. The stations were located in areas characterized by heavy traffic volumes, but away from industrial and/or municipal pollution sources. It was assumed, therefore, that lead in the samples collected was coming primarily from automobile emissions. Measurements were carried out over a period of one year. Both rain and snow samples were collected. Lead concentrations in the samples ranged from 0.6 to 141 microg dm(-3). They depended on street topography, traffic volume, average speed of the vehicles, frequency of traffic congestion and atmospheric conditions. The highest lead levels in deposition were observed during the cold season.     

Determination of elemental carbon emission

The studies on elemental carbon content in the atmospheric air, performed at the air monitoring station in Katowice (Poland), have revealed violations of allowable maximum average annual and diurnal concentrations. Elemental carbon is introduced into the atmosphere mainly as soot generated from combustion processes. This work presents the determination of elemental carbon in emission generated from coal combustion processes.