Relationships and bioaccumulation of chemical elements in the Baikal seal (Phoca sibirica)

Concentrations of Al, Ba, Cd, Cu, Fe, Mn, Mo, Si, Sr, Zn, Ca, K, Mg, Na and P in the livers of Baikal seal, plankton, zoobenthos, and fish, constituting the food sources for the seals, were determined by ICP-MS and ICP-AES. The accumulation of elements in the liver of seals, affected by internal and external (environmental) factors, was assessed by multidimensional (ANOVA, FA) and correlation analyses. FA has enabled identification of abiotic and biotic factors responsible for the accumulation of elements in the livers of Baikal seals. Significant influence of sex and development stage of the seals analysed on hepatic concentrations of some elements was found. The observed differences in element concentrations between pups, males and females could be attributable to the reproductive cycle of this species. ANOVA showed differences in concentrations of Fe, Zn, Cu and Cd in seals from the three separate basins of the lake. BMFs suggest biomagnification of Fe and Zn in the fish-seal trophic link.     

Quality-assured measurements of animal building emissions: particulate matter concentrations

Federally funded, multistate field studies were initiated in 2002 to measure emissions of particulate matter (PM) < 10 microm (PM10) and total suspended particulate (TSP), ammonia, hydrogen sulfide, carbon dioxide, methane, nonmethane hydrocarbons, and odor from swine and poultry production buildings in the United States. This paper describes the use of a continuous PM analyzer based on the tapered element oscillating microbalance (TEOM). In these studies, the TEOM was used to measure PM emissions at identical locations in paired barns. Measuring PM concentrations in swine and poultry barns, compared with measuring PM in ambient air, required more frequent maintenance of the TEOM. External screens were used to prevent rapid plugging of the insect screen in the PM10 preseparator inlet. Minute means of mass concentrations exhibited a sinusoidal pattern that followed the variation of relative humidity, indicating that mass concentration measurements were affected by water vapor condensation onto and evaporation of moisture from the TEOM filter. Filter loading increased the humidity effect, most likely because of increased water vapor adsorption capacity of added PM. In a single layer barn study, collocated TEOMs, equipped with TSP and PM10 inlets, corresponded well when placed near the inlets of exhaust fans in a layer barn. Initial data showed that average daily mean concentrations of TSP, PM10, and PM2.5 concentrations at a layer barn were 1440 +/- 182 microg/m3 (n = 2), 553 +/- 79 microg/m3 (n = 4), and 33 +/- 75 microg/m3 (n = 1), respectively. The daily mean TSP concentration (n = 1) of a swine barn sprinkled with soybean oil was 67% lower than an untreated swine barn, which had a daily mean TSP concentration of 1143 +/- 619 microg/m3. The daily mean ambient TSP concentration (n = 1) near the swine barns was 25 +/- 8 microg/m3. Concentrations of PM inside the swine barns were correlated to pig activity.     

Evaluation of zeolite for control of odorants emissions from simulated poultry manure storage

Poultry operations are associated with emissions of aerial ammonia (NH3), volatile organic compounds (VOCs), and odor, and the magnitude of emissions is influenced by manure management practices. As a manure treatment additive, zeolites have been shown to have the potential to control NH3. Because of their properties it is also expected that zeolites could effectively adsorb VOCs and odor. The effectiveness of zeolite in controlling odor and VOCs was qualitatively evaluated in this controlled laboratory study involving simulated poultry manure storage. In the first two trials, zeolite was topically applied on nearly fresh laying hen manure at the rates of 0, 2.5, 5, and 10% (by weight). In the third trial, zeolite was topically applied at 5% with each addition of fresh manure into the storage vessel. Headspace samples from the emission vessels were collected with solid phase microextraction (SPME) and analyzed on a multidimensional-gas chromatograph-mass spectrometry-olfactometry (MDGC-MS-O) system for identification and prioritization of poultry manure odorants. Acetic acid, butanoic acid, isovaleric acid, indole, and skatole were consistently controlled in the headspace, with the reduction rate being proportional to the zeolite application rate. Dimethyl trisulfide and phenol were consistently generated, and with a few exceptions, the rate of generation was proportional to the application rate. Average reduction of the odor caused by all odorants evaluated with SPME-GC-O was 67% (+/-12%) and 51% (+/-26%) for the two topical applications, respectively, while no significant reduction of VOCs and odor was detected for the layered application.     

Impact of soluble organic matter and particulate organic matter on anammox system: Performance,microbial community and N2O production

In this study,the effects of soluble readily biodegradable COD (sCOD) and particulate slowly biodegradable COD (pCOD) on anammox process were investigated.The results of the longterm experiment indicated that a low sCOD/N ratio of 0.5 could accelerate the anammox and denitrification activity,to reach as high as 84.9%±2.8% TN removal efficiency.Partial denitrification-anammox (PDN/anammox) and denitrification were proposed as the major pathways for nitrogen removal,accounting for 91.3% and 8.7% o...     

Betaine removal during thermo- and mesophilic aerobic batch biodegradation of beet molasses vinasse: influence of temperature and pH on the progress and efficiency of the process

The key issue in achieving a high extent of biodegradation of beet molasses vinasse is to establish the conditions for the assimilation of betaine, which is the main pollutant in this high-strength industrial effluent. In the present study, aerobic batch biodegradation was conducted over the temperature range of 27-63°C (step 9°C), at a pH of 6.5 and 8.0, using a mixed culture of bacteria of the genus Bacillus. Betaine was assimilated at 27-54°C and the pH of 8.0, as well as at 27-45°C and the pH of 6.5. The processes where betaine was assimilated produced a high BOD(5) removal, which exceeded 99.40% over the temperature range of 27-45°C at the pH of 8.0, as well as at 27°C and the pH of 6.5. Maximal COD removal (88.73%) was attained at 36°C and the pH of 6.5. The results indicate that the process can be applied on an industrial scale as the first step in the treatment of beet molasses vinasse.     

Distribution of volatile organohalogen compounds in petrochemical plant water streams

The study assesses halogenated volatile organic compound concentrations in the water and wastewater streams of a petrochemical plant. Water samples were collected at 11 sampling points during 5 sampling campaigns. The samples were collected from the oil dewaxing unit and in the wastewater treatment plant. Dichloromethane and 1,2-dichloroethane were the most frequently determined compounds. Tetrachloroethene was also detected at the wastewater treatment plant inlets. The concentrations of halogenated volatile organic compounds dropped significantly at wastewater discharge points compared to wastewater treatment plant inlets. The application of 1,2-dichloroethane/dichloromethane ratio as a tool to assess evaporation processes is discussed.     

A new derivatization method for a determination of MX and related hydroxyfuranones in water

An extremely potent mutagen, 3‐chloro‐4(dichloromethyl)‐5‐hydroxy‐2(5/f)‐furanone (MX) is commonly present in chlorinated drinking water. Due to its high mutagenic activity and according to WHO guidelines its concentration should be controlled in drinking waters. Determination of MX is difficult due to ppt levels at which the compound usually exists in drinking waters. Derivatization with 2‐propanol is presented as a method which significantly lowers GC/MS detection level of MX. Suitability of 2‐propylation for derivatization of other hydroxyfuranones is also shown.     

Changes in concentration levels of selected VOCs in newly erected and remodelled building in Gdansk

Volatile organic compounds such as benzene, toluene, butyl acetate, ethylbenzene, m-xylene, styrene and m-dichlorobenzene were measured in three newly erected and remodelled dwellings. The present study also attempted to examine the time dependence of concentrations of selected VOCs in each investigated dwelling. This was accomplished by at least triplicate measurements of the IAQ. To collect a series of air samples the active and passive methods were used. In both cases activated charcoal was applied as a sorption medium. The samples were recovered by solvent extraction, and analysed by capillary column gas chromatography, employing a flame ionisation detector. The experimental results showed that MAC values for analysed VOCs were exceeded (even a few orders of magnitude) for the measurements made before inhabiting of the occupants, in every investigated dwelling. The concentrations of the investigated VOCs decreased significantly with time, which should be expected, although in some cases the levels of selected VOCs remained still high. Our experience indicates that parallel application of two different indoor air sampling techniques to determine analytes of interest, though more laborious and time consuming, can lead to significant conclusions concerning indoor air quality in monitored spaces.