Mineralisation of target hydrocarbons in three contaminated soils from former refinery facilities

This study investigated the microbial degradation of ¹⁴C-labelled hexadecane, octacosane, phenanthrene and pyrene and considered how degradation might be optimised in three genuinely hydrocarbon-contaminated soils from former petroleum refinery sites. Hydrocarbon mineralisation by the indigenous microbial community was monitored over 23 d. Hydrocarbon mineralisation enhancement by nutrient amendment (biostimulation), hydrocarbon degrader addition (bioaugmentation) and combined nutrient and degrader amendment, was also explored. The ability of indigenous soil microflora to mineralise ¹⁴C-target hydrocarbons was appreciable; ≥16% mineralised in all soils. Generally, addition of nutrients or degraders increased the rates and extents of mineralisation of ¹⁴C-hydrocarbons. However, the addition of nutrients and degraders in combination had a negative effect upon ¹⁴C-octacosane mineralisation and resulted in lower extents of mineralisation in the three soils. In general, the rates and extents of mineralisation will be dependent upon treatment type, nature of the contamination and adaptation of the ingenious microbial community.     

Choosing a sustainable demolition waste management strategy using multicriteria decision analysis

This paper presents an application of the ELECTRE III decision-aid method in the context of choosing a sustainable demolition waste management strategy for a case study in the city of Lyon, France. This choice of waste management strategy takes into consideration the sustainable development objectives, i.e. economic aspects, environmental consequences, and social issues. Nine alternatives for demolition waste management were compared with the aid of eight criteria, taking into account energy consumption, depletion of abiotic resources, global warming, dispersion of dangerous substances in the environment, economic activity, employment, and quality of life of the local population. The case study concerned the demolition of 25 buildings of an old military camp. Each alternative was illustrated with different waste treatments, such as material recovery, recycling, landfilling, and energy recovery. The recommended solution for sustainable demolition waste management for the case study is a selective deconstruction of each building with local material recovery in road engineering of inert wastes, local energy recovery of wood wastes, and specific treatments for hazardous wastes.     

How long is long-term? reflections based on over 20 years of post-Chernobyl management in Norway

The radiation protection community has only recently started the important work of preparedness for long-term post-accidental management of radioactively contaminated areas, like for instance the EC projects STRATEGY, FARMING and EURANOS and the French authorities' CODIRPA and PAREX programmes. There are, however, different views concerning how long a long-term management might last. Based on the Norwegian and former Soviet Union experience after the Chernobyl accident, it is clear that a nuclear accident can entail decades of necessary management and rehabilitation of living conditions. The time period is dependent on a number of factors, e.g. amount of fallout, type of radionuclides, land use of contaminated area, number and density of people affected and available techniques and resources for implementing countermeasures. This paper discusses the management strategy implemented in Norway after the Chernobyl accident, the need for changing strategy over time and the important involvement of affected groups. Careful planning and reflections should be undertaken before actions are taken in the recovery phase, keeping in mind the possibility of decades with problems.     

The Influence of the Pacific Decadal Oscillation on Annual Floods in the Rivers of Western Canada

We analyzed annual peak flow series from 127 naturally flowing or naturalized streamflow gauges across western Canada to examine the impact of the Pacific Decadal Oscillation (PDO) on annual flood risk, which has been previously unexamined in detail. Using Spearman's rank correlation ρ and permutation tests on quantile‐quantile plots, we show that higher magnitude floods are more likely during the negative phase of the PDO than during the positive phase (shown at 38% of the stations by Spearman's rank correlations and at 51% of the stations according to the permutation tests). Flood frequency analysis (FFA) stratified according to PDO phase suggests that higher magnitude floods may also occur more frequently during the negative PDO phase than during the positive phase. Our results hold throughout much of this region, with the upper Fraser River Basin, the Columbia River Basin, and the North Saskatchewan River Basin particularly subject to this effect. Our results add to other researchers' work questioning the wholesale validity of the key assumption in FFA that the annual peak flow series at a site is independently and identically distributed. Hence, knowledge of large‐scale climate state should be considered prior to the design and construction of infrastructure.     

Participatory Impact Assessment of Soil and Water Conservation Scenarios in Oum Zessar Watershed, Tunisia

Environmental threats and progressive degradation of natural resources are considered critical impediments to sustainable development. This paper reports on a participatory impact assessment of alternative soil and water conservation (SWC) scenarios in the Oum Zessar watershed, Tunisia. The first objective was to assess the impact of three SWC scenarios on key social, economic and environmental land use functions. The second objective was to test and evaluate the applicability of the 'Framework for Participatory Impact Assessment (FoPIA)' for assessing scenario impacts in the context of a developing country, in this case Tunisia. The assessed scenarios included: the originally planned SWC policy implementation at 85 % coverage of arable land of the watershed, the current implementation (70 %), and a hypothetical expansion of SWC measures to the entire watershed (100 %). Our results suggest that implementation of the SWC policy at 100 % coverage of arable land achieves the maximum socioeconomic benefit. However, if stakeholders' preferences regarding land use functions are taken into account, and considering the fact that the implementation of SWC measures also implies some negative changes to traditional landscapes and the natural system, SWC implementation at 85 % coverage of arable land might be preferable. The FoPIA approved to be a useful tool for conducting a holistic sustainability impact assessment of SWC scenarios and for studying the most intriguing sustainability problems while providing possible recommendations towards sustainable development. We conclude that participatory impact assessment contributes to an enhanced regional understanding of key linkages between policy effects and sustainable development, which provides the foundation for improved policy decision making.     

Influence of mature compost amendment on total and bioavailable polycyclic aromatic hydrocarbons in contaminated soils

A laboratory microcosm study was carried out to assess the influence of compost amendment on the degradation and bioavailability of PAHs in contaminated soils. Three soils, contaminated with diesel, coal ash and coal tar, respectively, were amended with two composts made from contrasting feedstock (green waste and predominantly meat waste) at two different rates (250 and 750 t ha^?1) and incubated for 8 months. During this period the treatments were sampled for PAH analysis after 0, 3, 6 and 8 months. Total and bioavailable fractions were obtained by sequential ultrasonic solvent extraction and hydroxypropyl-β-cyclodextrin extraction, respectively, and PAHs were identified and quantified by GC–MS. Bioavailability decrease due to sorption was only observed at the first 3 months in the diesel spiked soil. After 8 months, compost addition resulted in over 90% loss of total PAHs irrespective of soil types. Desorption and degradation contributed to 30% and 70%, respectively, of the PAH loss in the spiked soil, while PAH loss in the other two soils resulted from 40% enhanced desorption and 60% enhanced degradation. Compost type and application rates had little influence on PAH bioavailability, but higher PAH removal was observed at higher initial concentration during the early stage of incubation. The bioavailable fraction of PAH was inversely correlated to the number of benzene rings and the octanol–water partition coefficient. Further degradation was not likely after 8-month although over 30% of the residual PAHs were bioavailable, which highlighted the application of bioavailability concept during remediation activities.     

Horizontal environmental assessment of building products in relation to the construction products directive (CPD)

According to the European Construction Products Directive (89/106/EC), construction products must satisfy specified essential requirements (ER). To comply with ER 3, on hygiene, health and environment, the construction works must be designed and built in such a way that they will not be a threat to the hygiene and health of the occupants and neighbours, nor to the environment. Standardised test methods for the release of substances that are hazardous to health and environment need to be developed at the European level. A horizontal approach is considered the best route for such test development and consists of the development of a test method applicable for different products used in a certain scenario (across the fields of different Technical Committees). The work presented here regards the emission of pollutants towards soil and water and has been carried out on monolith products, based on three types of matrices: concrete, wood and metal (zinc). The aim of the work is to study the parameters (nature of leachant, temperature, liquid-to-solid ratio) that could influence the release behaviour of substances in water. The knowledge acquired from these tests will allow the identification of some parameters needed for the development of a horizontal test.     

Simulation and analysis of solute transport in 2D fracture/pipe networks: the SOLFRAC program

The Time Domain Random Walk (TDRW) method has been recently developed by Delay and Bodin [Delay, F. and Bodin, J., 2001. Time domain random walk method to simulate transport by advection-dispersion and matrix diffusion in fracture networks. Geophys. Res. Lett., 28(21): 4051-4054.] and Bodin et al. [Bodin, J., Porel, G. and Delay, F., 2003c. Simulation of solute transport in discrete fracture networks using the time domain random walk method. Earth Planet. Sci. Lett., 6566: 1-8.] for simulating solute transport in discrete fracture networks. It is assumed that the fracture network can reasonably be represented by a network of interconnected one-dimensional pipes (i.e. flow channels). Processes accounted for are: (1) advection and hydrodynamic dispersion in the channels, (2) matrix diffusion, (3) diffusion into stagnant zones within the fracture planes, (4) sorption reactions onto the fracture walls and in the matrix, (5) linear decay, and (6) mass sharing at fracture intersections. The TDRW method is handy and very efficient in terms of computation costs since it allows for the one-step calculation of the particle residence time in each bond of the network. This method has been programmed in C++, and efforts have been made to develop an efficient and user-friendly software, called SOLFRAC. This program is freely downloadable at the URL (labo.univ-poitiers.fr/hydrasa/intranet/telechargement.htm). It calculates solute transport into 2D pipe networks, while considering different types of injections and different concepts of local dispersion within each flow channel. Post-simulation analyses are also available, such as the mean velocity or the macroscopic dispersion at the scale of the entire network. The program may be used to evaluate how a given transport mechanism influences the macroscopic transport behaviour of fracture networks. It may also be used, as is the case, e.g., with analytical solutions, to interpret laboratory or field tracer test experiments performed in single fractures.     

Bioleaching metal-bearing wastes and by-products for resource recovery: a review

The global transition to a circular economy calls for research and development on technologies facilitating sustainable resource recovery from wastes and by-products. Metal-bearing materials, including electronic wastes, tailings, and metallurgical by-products, are increasingly viewed as valuable resources, with some possessing comparable or superior quality to natural ores. Bioleaching, an eco-friendly and cost-effective alternative to conventional hydrometallurgical and pyrometallurgical methods, uses microorganisms and their metabolites to extract metals from unwanted metal-bearing materials. The performance of bioleaching is influenced by pH, solid concentration, energy source, agitation rate, irrigation rate, aeration rate, and inoculum concentration. Optimizing these parameters improves yields and encourages the wider application of bioleaching. Here, we review the microbial diversity and specific mechanisms of bioleaching for metal recovery. We describe the current operations and approaches of bioleaching at various scales and summarise the influence of a broad range of operational parameters. Finally, we address the primary challenges in scaling up bioleaching applications and propose an optimisation strategy for future bioleaching research.

     

Prenatal diagnosis of dilated coronary sinus with persistent left superior vena cava in a fetus with trisomy 18

A case of dilated coronary sinus with persistent left superior vena cava diagnosed at 33 weeks in a fetus with trisomy 18 is reported. The features of this cardiac anomaly on prenatal ultrasonography and its association with trisomy 18 are discussed. Published in 2003 John Wiley & Sons, Ltd.