Single-stage versus two-stage models to estimate creatinine corrected urinary analyte concentrations

The ability to detect 'known' differences in urinary analyte concentrations due to gender, age, and race/ethnicity when adjusted for similar differences in urinary creatinine concentrations were evaluated by a single-stage and a two-stage model by ten simulation studies. Log10 transformed values of observed urinary analyte concentration were used as the dependent variable and age, gender, and race/ethnicity were used as the categorical independent variables. In addition, while single-stage model used log10 transformed values of urinary creatinine as a covariate, two-stage model used a correction factor (CF) determined during the first stage of the model by fitting a secondary model for urinary creatinine. Single-stage model was almost always able to statistically significantly detect 'known' differences due to age, gender, and race/ethnicity. On the other hand, two-stage model was able to statistically significantly detect 'known' differences due to age, gender, and race/ethnicity a maximum of 87.2% of the times and as low as 10.6% of the times primarily because of the presence of multicollinearity between CF and urinary creatinine concentrations. Consequently, as long as the sole objective is to estimate the urinary analyte concentrations adjusted for the effect of all factors including urinary creatinine, single-stage models are the models of choice.     

Characterization of pollutants in Florida street sweepings for management and reuse

Disposal and beneficial-use options for street sweeping residuals collected as part of routine roadway maintenance activities in Florida, USA, were assessed by characterizing approximately 200 samples collected from 20 municipalities. Total concentrations (mg/kg or μg/kg) and leachable concentrations (mg/L or μg/L) of 11 metals and a number of organic pollutant groups (volatile organics, semi-volatile organics, pesticides, herbicides, carbamates) in the samples were measured. The synthetic precipitation leaching procedure (SPLP) was performed to evaluate the leachability of the pollutants. From the total metal analysis, several metals (e.g., arsenic, barium, chromium, copper, nickel, lead, and zinc) were commonly found above their detection limits. Zinc was found to have the highest mean concentration of all metals measured (46.7 mg/kg), followed by copper (10.7 mg/kg) and barium (10.5 mg/kg). The metal with the smallest mean concentration was arsenic (0.48 mg/kg). A small fraction of the total arsenic, barium, lead, and zinc leached in some samples using the SPLP; leached concentrations were relatively low. A few organic compounds (e.g., 4,4′-DDT, endrin, and endosulfan II) were detected in a limited number of samples. When the total and leaching results were compared to risk-based Florida soil cleanup target levels and groundwater cleanup target levels, the street sweepings were not found to pose a significant human-health risk via direct exposure or groundwater contamination.     

The value of EHS auditing in the United States: Solutions for audit protection

Conventional wisdom has advocated environmental auditing as a prudent part of an internal control program and one of the key tools in driving proactive efforts. As a part of risk management activities, it is often employed to protect an organization and its employees and officers from liability. Conscientious use of such audits has undoubtedly protected human health and the environment. Ironically, those who make the most consistent efforts to audit compliance and management systems, according to advocates of audit protection, may be the most vulnerable to enforcement actions and lawsuits. In this, the second part of a two-part article, we turn our attention to the likely solutions for audit protection in the current context.     

Non-powered hand tool improvement research for prevention of work-related problems: a review

Purpose. In lower-middle-income countries, most of the work is performed manually using non-ergonomic hand tools which results in work-related health problems. Using hand tools designed in line with ergonomic principles may play an important role in reducing work-related health concerns significantly. Methods. Scientific databases (PubMed, EBSCOhost) and e-publishers were searched for articles from 1985 to 2015 using the following keywords: ‘hand tool’, ‘ergonomics’, ‘usability’ and ‘design’. After applying selection criteria to 614 articles, 58 articles related to the physical design of hand tools were selected. Results. Seventeen articles were related to hand tool improvement in the manufacturing sector. Musculoskeletal disorders were found to be the most frequently occurring work-related health problems. Most of the articles focused on product and qualitative variables for improvement in hand tools, while few articles considered human and task variables. Conclusions. Literature shows that hand tool improvement studies have been given less importance in low-income and lower-middle-income countries. However, some work of significance is reported in the agriculture sectors of these countries. Hence, it is concluded that ergonomic intervention in hand tools is much needed for those industries which employ traditional methods of working.     

Precipitation and aerosol studies in India

In India, rain water and atmospheric aerosols are observed to bealkaline in nature due to the influence of soil-derivedparticles which are rich in components like Ca and Mg. Thesecomponents increase the neutralization potential of rain waterand have a greater influence at rural site compared to urbansite. However, if there are continuous rains, the concentrationof crustal components becomes lower resulting in lower pH ofrain water. Unlike the characteristics of rain water oncontinent, the pH of rain water has been observed to be acidicin all the events over the Indian Ocean during Pre-campaigns ofIndian Ocean Experiment (INDOEX). The possible reason for acidicrains over Indian Ocean could be the anthropogenic contributionfrom continent transported by NE winds coming towards the oceanduring this period.     

Heavy metal content in soil reclaimed from a municipal solid waste landfill

Residues reclaimed from a municipal solid waste (MSW) landfill were characterized for the concentrations of a number of heavy metals. The residue fractions analyzed included a fine fraction (<0.425 mm), an intermediate fraction (>0.425 and <6.3 mm) and a fraction consisting of paper products that could ultimately degrade to a smaller size. The intermediate fraction appeared to be organic in nature, while the fine fraction was more soil-like. In general, the metal concentrations were greatest in the intermediate fraction and lowest in the fine fraction. The effect of sample age on the elemental content was also investigated. The concentrations of several elements were greater in older samples (sample approximately 8 years in age) when compared to newer samples (sample approximately 3 years in age). Limitations associated with the land application of residual soil (composed of the fine and intermediate fractions) were assessed by comparing measured concentrations to regulatory threshold values. In general, most metal concentrations were below regulatory thresholds for use in unrestricted settings. At the concentrations measured, however, several elements might limit reuse options, depending on which regulatory threshold serves as a benchmark. Elevated concentrations of arsenic presented the greatest limitation with respect to common US thresholds while elevated cadmium concentrations presented the greatest limitation when compared to UK thresholds. The source of the arsenic was determined to be the waste, not the cover soil.     

Methane and nitrous oxide emissions from an irrigated rice of North India

Upland rice was grown in the kharif season (June-September) under irrigated condition in New Delhi, India (28 degree 40'N and 77 degree 12'E) to monitor CH4 and N2O emission, as influenced by fertilizer urea, ammonium sulphate and potassium nitrate alone (at 120 kg ha-1) and mixed with dicyandiamide (DCD), added at 10% of applied N. The experimental soil was a typic ustochrept (Inceptisol), clay loam, in which rice (Oryza sativa L., var. Pusa-169, duration: 120-125 days) was grown and CH4 and N2O was monitored for 105 days by closed chamber method, starting from the 5 days and 1 day after transplanting, respectively. Methane fluxes had a considerable temporal variation (CV=52-77%) and ranged from 0.05 (ammonium sulphate) to 3.77 mg m-2 h-1 (urea). There was a significant increase in the CH4 emission on the application of fertilizers while addition of DCD with fertilizers reduced emissions. Total CH4 emission (105 days) ranged from 24.5 to 37.2 kg ha-1. Nitrous oxide fluxes were much lower than CH4 fluxes and had ranged from 0.18 to 100.5 g m-2 h-1 with very high temporal variation (CV=69-143%). Total seasonal N2O emission from different treatments ranged from 0.037 to 0.186 kg ha-1 which was a N loss of 0.10-0.12% of applied N. All the fertilizers significantly increased seasonal N2O emission while application of DCD reduced N2O emissions significantly in the range of 10-53%.     

Role of magnetite and humic acid in radionuclide migration in the environment

Sorption of ¹³⁷Cs, ⁹⁰Sr, ¹⁵⁴Eu and ¹⁴¹Ce by magnetite has been studied at varying pH (4 to 11) in the presence and absence of humic acid. The sorption studies have also been carried out at varying ionic strength (0.01 to 0.2 M NaClO₄) and humic acid concentration (2 to 20 mg/L). Percentage sorption of ¹³⁷Cs and ⁹⁰Sr was found to be pH dependent, with the sorption increasing with increasing pH of the suspension. At any pH, the percentage sorption of ⁹⁰Sr was higher than that of ¹³⁷Cs. The results have been explained in terms of the electrostatic interaction between the positively charged metal ions and the surface charge of the magnetite which becomes increasingly negative with increasing pH. On the other hand, ¹⁵⁴Eu and ¹⁴¹Ce were found to be strongly sorbed by the magnetite at all pH values, with the sorption being independent of pH. The strong sorption of trivalent and tetravalent metal ions suggests the role of complexation reactions during sorption, apart from the electrostatic interactions. However, in the case of ¹⁴¹Ce surface precipitation of Ce(III) formed by reduction of Ce(IV) in the presence of magnetite cannot be ruled out. Presence of humic acid (2 mg/L) was found to have negligible effect on sorption of all metal ions.