The effect of ambient temperature on forager sound production and thoracic temperature in the stingless bee, <Emphasis Type="Italic">Melipona panamica</Emphasis>

Foragers of the stingless bees genus Melipona may produce intranidal sounds that are correlated with food location and quality. In this study, we provide the first detailed analysis of pulsed sounds produced by Melipona panamica foragers while feeding on a carbohydrate food source. We trained foragers to a 2.5-M sucrose feeder under normal, ambient temperature (23–33°C) and lower temperature (11–25°C) conditions. We recorded forager sounds under both conditions and tested the effect of temperature of the thorax, feeder plate, and air on sound temporal characteristics. Forager energetic expenditure and the number of pulses per visit were significantly higher in the cold condition than in the normal condition. Foragers spent a longer time at the feeder under the cold condition than during the normal condition. Interpulse durations were significantly shorter in the cold condition than in the normal condition and became progressively and significantly shorter at the end of each performance. Thus, pulse production increased before departure. Foragers increased their thoracic temperatures above ambient at all experimental air temperatures. Under chilled conditions, foragers had a significantly greater difference between thorax temperature and ambient air temperature than under normal conditions. Foragers must achieve a minimum flight muscle temperature before take-off, and thus forager sounds may be linked to muscle warm-up.     

The Surface Roughness of a Rubber Soling Material Determines the Coefficient of Friction on Water-Lubricated Surfaces

For more than a decade, evidence has been accumulating that points to the fact that the microscopic roughness of the footwear soling surface is a major determinant of slip-resistance on lubricated surfaces, but conclusive experimental proof has been lacking. This article describes an experiment in which five pairs of shoes were soled with the same rubber compound. Four of the pairs were abraded by different grades of grit to produce a range of roughness values. The coefficient of friction (CoF) of the five solings was then measured repeatedly by the walking traction method on wet surfaces including glazed wall tiles, vinyl asbestos coated with the wax floor polish, and both sides of a sheet of float glass. The Kruskal-Wallis statistical test proved beyond doubt that the soling roughness is a major factor in determining the CoF of this rubber soling material; p < 10⁻⁵. Nearly all of the grip was due to surface roughness of the soling material on these atypically smooth floors, although the surface roughness of the floors also had a significant effect on CoF; p < 0.003. Float glass is shown to be a promising reference floor material for the measurement of CoF of footwear; there was no statistical difference between results for the two sides of the glass sheet. Float glass could be used in the development of a standard CoF test method because new sheets of glass from the same manufacturer are identical and extremely smooth. The specification of CoF values for solings/floors combinations in lubricated conditions is of little value unless associated with roughness measurements and knowledge of how wear will affect the surface roughness of the sole. This article reports the first evidence that any specification of flooring by measuring CoF based on dry surfaces could lead to an increase in the number of injuries caused by slipping on the wet surfaces. Published by Elsevier Science Ltd     

Does Decentralization Matter in Environmental Management?

/ Questionnaires from 39 state National Pollutant Discharge Elimination System (NPDES) agencies were analyzed using principal component analysis and multiple regression. Decentralized programs scored better in a fundamental indicator of efficiency (lower percentage of expired permits) and in the key effectiveness measure of unit-cost compliance achieved. In no case did centralized states score significantly better than decentralized ones. These results indicated support for the theory that superior local knowledge is the key mechanism. Case studies of five states suggested internal program adjustments may cause outcomes to converge towards efficiency and effectiveness, perhaps explaining the large number of variables showing no difference between centralized programs and decentralized ones.KEY WORDS: NPDES; Compliance; Decentralization; Outcome; Efficiency; Unit-cost analysis     

First trimester chorionic villus sampling versus mid-trimester genetic amniocentesis-preliminary results of a controlled prospective trial

This controlled prospective study assesses the relative risks of first trimester chorionic villus sampling (CVS) versus mid-trimester gentic amniocentesis (GA). CVS subjects and amnio-centesis controls were comparable with regard to several confounding variables which might influence the risk of pregnancy loss including maternal age, smoking, alcohol consumption, gestational age at study entry, and history of vaginal bleeding or poor prior reproductive outcome. The most common indication for prenatal diagnosis was advanced maternal age (n = 511). In this subgroup, spontaneous abortion (<24 weeks) occurred in 2·9 per cent of CVS subjects versus 4−3 per cent of amniocentesis controls. The sum of spontaneous and therapeutic abortions (<24 weeks) was identical (5·3 per cent) in both groups. Therefore, intervention in the CVS group (i.e., therapeutic abortion for cytogenetic abnormalities) did not influence the observed risk of pregnancy loss. Overall perinatal mortality rates were also similar in both groups. No significant differences were identified for a number of pregnancy outcome parameters including 5 min Apgar score, birth weight, body length, head circumference, gestational age at delivery, preterm delivery, fetal growth retardation, congenital malformations, and neonatal complications. Preliminary results of this controlled prospective study suggest that chorionic villus sampling carries a low and acceptable risk.     

Very low versus undetectable maternal serum alpha-fetoprotein values and fetal death

Very low maternal serum alpha-fetoprotein (MSAFP) levels (<10 ng/mL) are known to be associated with non-viable pregnancies, including conditions such as fetal death, molar pregnancies, and non-pregnancies. There has not been agreement, however, as to whether very low MSAFP levels indicate already existing fetal deaths or are actually predictive. We analysed 230 pregnancies with MSAFP levels <10 ng/mL from among 15 807 women (1.5 per cent) screened consecutively during a three-year period and identified 26 non-viable pregnancies, 22 of which were diagnosed sonographically as part of the screening process (17 missed abortions, 3 blighted ova, 2 non-pregnancies). Furthermore, 20 of these 22 pregnancies were associated with essentially undetectable MSAFP levels (<5 ng/mL). Our data indicate that pregnancies with MSAFP values <5 ng/mL are the group most strongly associated with fetal non-viability and that very low MSAFP values are not strongly predictive for fetal death.     

Separation and capture of CO2 from large stationary sources and sequestration in geological formations--coalbeds and deep saline aquifers

The topic of global warming as a result of increased atmospheric CO2 concentration is arguably the most important environmental issue that the world faces today. It is a global problem that will need to be solved on a global level. The link between anthropogenic emissions of CO2 with increased atmospheric CO2 levels and, in turn, with increased global temperatures has been well established and accepted by the world. International organizations such as the United Nations Framework Convention on Climate Change (UNFCCC) and the Intergovernmental Panel on Climate Change (IPCC) have been formed to address this issue. Three options are being explored to stabilize atmospheric levels of greenhouse gases (GHGs) and global temperatures without severely and negatively impacting standard of living: (1) increasing energy efficiency, (2) switching to less carbon-intensive sources of energy, and (3) carbon sequestration. To be successful, all three options must be used in concert. The third option is the subject of this review. Specifically, this review will cover the capture and geologic sequestration of CO2 generated from large point sources, namely fossil-fuel-fired power gasification plants. Sequestration of CO2 in geological formations is necessary to meet the President's Global Climate Change Initiative target of an 18% reduction in GHG intensity by 2012. Further, the best strategy to stabilize the atmospheric concentration of CO2 results from a multifaceted approach where sequestration of CO2 into geological formations is combined with increased efficiency in electric power generation and utilization, increased conservation, increased use of lower carbon-intensity fuels, and increased use of nuclear energy and renewables. This review covers the separation and capture of CO2 from both flue gas and fuel gas using wet scrubbing technologies, dry regenerable sorbents, membranes, cryogenics, pressure and temperature swing adsorption, and other advanced concepts. Existing commercial CO2 capture facilities at electric power-generating stations based on the use of monoethanolamine are described, as is the Rectisol process used by Dakota Gasification to separate and capture CO2 from a coal gasifier. Two technologies for storage of the captured CO2 are reviewed--sequestration in deep unmineable coalbeds with concomitant recovery of CH4 and sequestration in deep saline aquifers. Key issues for both of these techniques include estimating the potential storage capacity, the storage integrity, and the physical and chemical processes that are initiated by injecting CO2 underground. Recent studies using computer modeling as well as laboratory and field experimentation are presented here. In addition, several projects have been initiated in which CO2 is injected into a deep coal seam or saline aquifer. The current status of several such projects is discussed. Included is a commercial-scale project in which a million tons of CO2 are injected annually into an aquifer under the North Sea in Norway. The review makes the case that this can all be accomplished safely with off-the-shelf technologies. However, substantial research and development must be performed to reduce the cost, decrease the risks, and increase the safety of sequestration technologies. This review also includes discussion of possible problems related to deep injection of CO2. There are safety concerns that need to be addressed because of the possibilities of leakage to the surface and induced seismic activity. These issues are presented along with a case study of a similar incident in the past. It is clear that monitoring and verification of storage will be a crucial part of all geological sequestration practices so that such problems may be avoided. Available techniques include direct measurement of CO2 and CH4 surface soil fluxes, the use of chemical tracers, and underground 4-D seismic monitoring. Ten new hypotheses were formulated to describe what happens when CO2 is pumped into a coal seam. These hypotheses provide significant insight into the fundamental chemical, physical, and thermodynamic phenomena that occur during coal seam sequestration of CO2.     

A screening study of the treatability of dioxins and furans in bleach plant filtrates and mill wastewaters

Findings are presented of a study to provide the pulp and paper industry with basic data regarding the feasibility for treatment of bleach plant filtrates or combined treated mill effluents for 2,3,7,8-TCDD and 2,3,7,8-TCDF reduction.     

Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength

Large amounts of 137Cs have been accidentally released to the subsurface from the Hanford nuclear site in the state of Washington, USA. The cesium-containing liquids varied in ionic strengths, and often had high electrolyte contents, mainly in the form of NaNO3 and NaOH, reaching concentrations up to several moles per liter. In this study, we investigated the effect of ionic strengths on Cs migration through two types of porous media: silica sand and Hanford sediments. Cesium sorption and transport was studied in 1, 10, 100, and 1000 mM NaCl electrolyte solutions at pH 10. Sorption isotherms were constructed from batch equilibrium experiments and the batch-derived sorption parameters were compared with column breakthrough curves. Column transport experiments were analyzed with a two-site equilibrium-nonequilibrium model. Cesium sorption to the silica sand in batch experiments showed a linear sorption isotherm for all ionic strengths, which matched well with the results from the column experiments at 100 and 1000 mM ionic strength; however, the column experiments at 1 and 10 mM ionic strength indicated a nonlinear sorption behavior of Cs to the silica sand. Transport through silica sand occurred under one-site sorption and equilibrium conditions. Cesium sorption to Hanford sediments in both batch and column experiments was best described with a nonlinear Freundlich isotherm. The column experiments indicated that Cs transport in Hanford sediments occurred under two-site equilibrium and nonequilibrium sorption. The effect of ionic strength on Cs transport was much more pronounced in Hanford sediments than in silica sands. Effective retardation factors of Cs during transport through Hanford sediments were reduced by a factor of 10 when the ionic strength increased from 100 to 1000 mM; for silica sand, the effective retardation was reduced by a factor of 10 when ionic strength increased from 1 to 1000 mM. A two order of magnitude change in ionic strength was needed in the silica sand to observe the same change in Cs retardation as in Hanford sediments.     

Spatial PM2.5 mobile source impacts using a calibrated indicator method

Motor vehicles are major sources of fine particulate matter (PM_2.5), and the PM_2.5 from mobile vehicles is associated with adverse health effects. Traditional methods for estimating source impacts that employ receptor models are limited by the availability of observational data. To better estimate temporally and spatially resolved mobile source impacts on PM_2.5, we developed an approach based on a method that uses elemental carbon (EC), carbon monoxide (CO), and nitrogen oxide (NO_x) measurements as an indicator of mobile source impacts. We extended the original integrated mobile source indicator (IMSI) method in three aspects. First, we generated spatially resolved indicators using 24-hr average concentrations of EC, CO, and NO_x estimated at 4 km resolution by applying a method developed to fuse chemical transport model (Community Multiscale Air Quality Model [CMAQ]) simulations and observations. Second, we used spatially resolved emissions instead of county-level emissions in the IMSI formulation. Third, we spatially calibrated the unitless indicators to annually-averaged mobile source impacts estimated by the receptor model Chemical Mass Balance (CMB). Daily total mobile source impacts on PM_2.5, as well as separate gasoline and diesel vehicle impacts, were estimated at 12 km resolution from 2002 to 2008 and 4 km resolution from 2008 to 2010 for Georgia. The total mobile and separate vehicle source impacts compared well with daily CMB results, with high temporal correlation (e.g., R ranges from 0.59 to 0.88 for total mobile sources with 4 km resolution at nine locations). The total mobile source impacts had higher correlation and lower error than the separate gasoline and diesel sources when compared with observation-based CMB estimates. Overall, the enhanced approach provides spatially resolved mobile source impacts that are similar to observation-based estimates and can be used to improve assessment of health effects.

Implications: An approach is developed based on an integrated mobile source indicator method to estimate spatiotemporal PM_2.5 mobile source impacts. The approach employs three air pollutant concentration fields that are readily simulated at 4 and 12 km resolutions, and is calibrated using PM_2.5 source apportionment modeling results to generate daily mobile source impacts in the state of Georgia. The estimated source impacts can be used in investigations of traffic pollution and health.     

The fate of estrogenic hormones in an engineered treatment wetland with dense macrophytes.

Recently, the estrogenic hormones 17beta-estradiol (E2) and 17alpha-ethinyl estradiol (EE2) have been detected in municipal wastewater effluent and surface waters at concentrations sufficient to cause feminization of male fish. To evaluate the fate of steroid hormones in an engineered treatment wetland, lithium chloride, E2, and EE2 were added to a treatment wetland test cell. Comparison of hormone and tracer data indicated that 36% of the E2 and 41% of the EE2 were removed during the cell's 84-h hydraulic retention time (HRT). The observed attenuation was most likely the result of sorption to hydrophobic surfaces in the wetland coupled with biotransformation. Sorption was indicated by the retardation of the hormones relative to the conservative tracer. Biotransformation was indicated by elevated concentrations of the E2 metabolite, estrone. It may be possible to improve the removal efficiency by increasing the HRT or the density of plant materials.