Graduated driver licensing and safer driving

Graduated Driver Licensing (GDL) inserts between the leaner permit and full licensure an intermediate or "provisional" license that allows novices to drive unsupervised but subject to provisions intended to reduce the risks that accompany entry into highway traffic. Introduction of GDL has been followed by lowered accident rates, resulting from both limiting exposure of novices to unsafe situations and by helping them to deal with them more safely. Sources of safer driving include extended learning, early intervention, contingent advancement, and multistage instruction. To extend the learning process, most GDL systems lengthen the duration of the learner phase and require a specified level of adult-supervised driving. Results indicate that extended learning can reduce accidents substantially if well structured and highly controlled. Early intervention with novice traffic violators have shown both a general deterrent effect upon novice violators facing suspension and a specific effect upon those who have experienced it. Making advancement to full licensure contingent upon a violation-free record when driving on the provisional license has also evidenced a reduction in accidents and violations during that phase of licensure. Multistage instruction attempts development of advanced skills only after novices have had a chance to master more basic skills. Although this element of GDL has yet to be evaluated, research indicates crash reduction is possible in situations where it does not increase exposure to risk. While the various elements of GDL have demonstrated potential benefit in enhancing the safety of novice drivers, considerable improvement in the nature and enforcement of GDL requirements is needed to realize that potential.     

Effects of static vs. tidal hydrology on pollutant transformation in wetland sediments

This work addressed effects of hydrology on biogeochemical processes relevant to pollutant chemical transformation in wetland sediments. Microcosms were designed to impose three hydrologic conditions on salt marsh sediments: (i) drained-oxidized redox potenial (Eh); (ii) flooded-reduced Eh and, (iii) diurnal tide-oscillating Eh. The test chemicals were N- and/or S-heterocycles (NSHs) including quinoxaline (1,4-benzodiazine), 2-methylquinoxaline(2-methyl-1,4-benzodiazine), 2,3-dimethylquinoxalinen (2,3-dimethyl-1,4-benzodiazine), phenazine (2,3,5,6-dibenzo-1,4-diazine), acridine (2,3,5,6-dibenzopyridine), dibenzothiophene (2,3,5-dibenzothiophene), phenothiazine (dibenzo-1,4-thiazine), and phenanthridine (2,3-benzoisoquinoline). Biogeochemical processes reflected the hydrologic conditions in ways analogous to field settings, e.g., Eh characteristics were drastically different: static (flooded and drained) systems had reduced (mu = -428 mV +/- 57) and oxidized (mu = +73 mV +/- 32) values, respectively, with no evidence of periodic variation while the tidal systems exhibited regularly oscillating Eh (amplitudes 40-250 mV). Sediment trace gases also corresponded to the Eh, with the major species detected being CO2 and H2O (drained, tidal) vs. CO2 + H2O + sulfides + methane (flooded). The NSH transformation rates were different in each hydrologic regime and decreased as follows: tidal > or = drained > flooded. These results indicated that there were subtle differences in NSH processing in drained and tidal systems, but both of these systems transformed NSHs faster and to lower levels than flooded sediments. These data suggest that in situ remediation options that preserve wetland integrity and tidal hydrology can be as or more effective than static conditions that obtain in approaches such as impoundment and excavation-upland placement.     

Surface runoff losses of copper and zinc in sandy soils

Increased anthropogenic inputs of Cu and Zn in soils have caused considerable concern relative to their effect on water contamination. Copper and Zn contents in surface soil directly influence the movement of Cu and Zn. However, minimal information is available on runoff losses of Cu and Zn in agricultural soils, and soil-extractable Cu and Zn in relation to runoff water quality. Field experiments were conducted in 2001 to study dissolved Cu and Zn losses in runoff in Florida sandy soils under commercial citrus and vegetable production and the relationship between soil-extractable Cu and Zn forms and dissolved Cu and Zn concentrations in runoff water. Five extraction methods were compared for extracting soil available Cu and Zn. Concentrations of dissolved Cu and Zn in runoff were measured and runoff discharge was monitored. Mean dissolved Cu in field runoff water was significantly correlated with the extractable Cu obtained only by 0.01 mol L(-1) CaCl2, Mehlich 1, or DTPA-TEA methods. Dissolved Zn in runoff water was only significantly correlated with extractable Zn by 0.01 mol L(-1) CaCl2. The highest correlations to dissolved Cu in runoff were obtained when soil-available Cu was extracted by 0.01 mol L(-1) CaCl2. The results indicate that 0.01 mol L(-1) CaCl2-extractable Cu and Zn are the best soil indexes for predicting readily released Cu and Zn in the sandy soils. Both runoff discharge and 0.01 mol L(-1) CaCl2-extractable Cu and Zn levels had significant influences on Cu and Zn loads in surface runoff.     

Aggregating the benefits of environmental improvements: distance-decay functions for use and non-use values

One of the main problems in using environmental cost-benefit analysis is deciding on the relevant population: whose benefits should we count? This is important since aggregate benefits depend on both per-person benefit and the number of beneficiaries. Yet this latter term is often hard to evaluate. Distance-decay functions are one way of addressing this problem. In this paper, we present estimates of distance-decay functions for a particular environmental improvement, namely a reduction in low flow problems on the River Mimram in Southern England. We do this both for users and non-users, in the context of a contingent valuation study of the benefits of improving low flow conditions. We test whether distance-decay effects for mean Willingness to Pay are stronger for a single environmental good (the River Mimram, in this case) than for a more inclusive set (here, all rivers in Thames region which suffer from low flow problems). Finally, we explore the impact on part-whole bias, in terms of the relationship between WTP for an individual site and WTP for a more inclusive group of sites, of allowing for distance-decay effects.     

Development and Adoption of a Simple Nonpoint Source Pollution Model for Port Phillip Bay,Australia

New computing tools and approaches allow tailored development of software to meet the needs of environmental managers. The processes required for such tailoring fit well with adaptive management concepts where, as knowledge and system understanding develop among managers, the software can be developed or replaced to match. This paper reports on development and adoption of a simple nonpoint source pollution modeling tool, including technical aspects of data support for modeling and social aspects of software design. The software, named FILTER, used a unit load model to generate expected pollutant loads from subcatchments of Port Phillip Bay, Australia. Monitoring data were used for calibration to modify the delivery of generated pollutants to receiving waters. Spatial, tabular, and charting software components were used to provide alternative forms of output visualization. FILTER was developed using a process that resulted in manager-stakeholders taking responsibility for setting of model parameter values and operation of the user interface, thereby encouraging uptake. The inclusive development process, tailoring of the software to manager needs and styles of usage, and matching of model complexity to data and knowledge, resulted in a successful application that has become the current agreed system representation among disparate stakeholder organizations.     

Components of the Total Water Balance of an Urban Catchment

A daily model was used to quantify the components of the total urban water balance of the Curtin catchment, Canberra, Australia. For this catchment, the mean annual rainfall was found to be three times greater than imported potable water, and the sum of the output from the separate stormwater and wastewater systems exceeded the input of imported potable water by some 50%. Seasonal and annual variations in climate exert a very strong influence over the relative magnitude of the water balance components; this needs to be accounted for when assessing the potential for utilizing stormwater and wastewater within an urban catchment.     

Repeated trans-Arctic invasions in littoral bivalves: molecular zoogeography of the<Emphasis Type="Italic"> Macoma balthica</Emphasis> complex

From a geographical survey of allozyme variation, a history of repeated trans-Arctic invasions since the Plio-Pleistocene is suggested for circumboreal bivalves of the Macoma balthica complex. A principal genetic subdivision, involving several nearly diagnostic loci and Nei's distance D=0.6, distinguishes the clams of the NE Pacific from those of the NE Atlantic. The Pacific taxon is however also present in Europe, in disjunct isolates in the Baltic Sea and White Sea basins. Nevertheless, these populations have marked Atlantic introgressive elements in their gene pools (ca. 30%). Two further population types are recognized, one in the St. Lawrence estuary, Quebec, the other in Varangerfjorden, NE Norway; the latter appears a mixture of Pacific and Atlantic components in almost equal proportions, in local genetic equilibrium (a hybrid swarm). Populations in temperate North America fall outside the circumboreal M. balthica complex discussed here (D=1.0), and are referred to M. petalum. In a scenario of the history and evolution of the M. balthica complex and the similarly subdivided Mytilus edulis complex, the divergence between Pacific and Atlantic taxa started after an initial introduction of Pacific ancestors to the Atlantic basin, enabled by the Pliocene opening of the Bering Strait. During the Pleistocene and Holocene, the ocean basins were, for the most part, effectively isolated, but occasional re-invasions have taken place, causing secondary contacts of the diverged bivalve types on the Atlantic coasts. The recently re-invaded Pacific taxa in northern Europe now seem to thrive only in the extreme marginal environments. Exact dating of the re-invasions is not possible from current data. Apart from the divergence through isolation, hybridization and introgression have significantly molded the present affinities within the M. balthica complex. A formal taxonomic treatment of reticulate and hybridizing lineages is problematic; yet to recognize the evolutionary and systematic diversity within the M. balthica complex, a subspecies distinction between the NE Atlantic clams and those from the Pacific, Baltic and White Sea basins is suggested.Communicated by L. Hagerman, Helsingør     

Assessment of the leaching of metallic elements in the technology of solidification in aqueous solution

Results are presented of experiments performed to optimize the solidification/stabilization system for metallic elements in aqueous solution. This system involves mixing cement and a solution of metallic elements in a conventional mixer: the paste thus obtained is transferred drop by drop into a recipient filled with an aqueous solution of NaOH at 20% by weight, in which it solidifies immediately. The separate use of chloride solutions of Li+, Cr3+, Pb2+ and Zn2+ makes it possible to obtain granules displaying various levels of compressive strength. Three different inertization matrices were used in the experiments, the first consisting solely of Portland cement, the second of Portland cement and a superplasticizer additive, and the third of Portland cement partially replaced with silica-fume and superplasticizer. The results of the tests performed showed a very low level of leaching into the alkaline solidification solution for Cr3+, the quantity leached being under 2% as against higher levels for the other metallic elements. For all the considered elements, the best results were obtained by using silica-fume in the inertization matrix.     

Waste ecocompatibility in storage and reuse scenarios: global methodology and detailed presentation of the impact study on the recipient environments

In 1995, the ADEME launched a research program called "Waste Ecocompatibility" in order to define a reliable methodology for measuring the impact of waste in storage or reuse scenarios. The French concept of "Ecocompatibility" is defined as the situation where the pollutant flux from waste disposed of or used in specified conditions is compatible with the environmental acceptance of the receiving environments. The chief feature of this definition is to integrate the evaluation of the three following terms: pollutants emission from the waste, transport of the pollutants from the waste to the receptor cells and the environmental acceptance of the receiving environments. The "Waste Ecocompatibility" program consisted of a literature survey and an experimental part. The literature study aimed to determine factors and waste characteristics to be considered for a reliable ecocompatility assessment, to provide an overview of the available tools for measuring those factors and characteristics and to propose a first approach of the methodology. In the framework of the experimental program, this approach was then applied to three theoretical scenarios to validate the laboratory tools (comparative study of laboratory and field results) and to calibrate the global methodology. This paper deals with the results of the experimental program concerning the impact study on receiving environments: impact on plants and microorganisms living in soil, impacts on soil fauna and aquatic fauna. In other papers we intend to present the operational methodology for the assessment of waste ecocompatibility. It includes bio-assays at laboratory scale (microcosms), pilot scale (mesocosms) and in situ experiments (experimental prairie). To limit the use of in situ experiments other research works are necessary to validate bio-assays at laboratory or pilot scale.     

Field testing of particulate matter continuous emission monitors at the DOE Oak Ridge TSCA incinerator. Toxic Substances Control Act

A field study to evaluate the performance of three commercially available particulate matter (PM) continuous emission monitors (CEMs) was conducted in 1999-2000 at the US Department of Energy (DOE) Toxic Substances Control Act (TSCA) Incinerator. This study offers unique features that are believed to enhance the collective US experience with PM CEMs. The TSCA Incinerator is permitted to treat PCB-contaminated RCRA hazardous low-level radioactive wastes. The air pollution control system utilizes MACT control technology and is comprised of a rapid quench, venturi scrubber, packed bed scrubber, and two ionizing wet scrubbers in series, which create a saturated flue gas that must be conditioned by the CEMs prior to measurement. The incinerator routinely treats a wide variety of wastes including high and low BTU organic liquids, aqueous, and solid wastes. The various possible combinations for treating liquid and solid wastes may present a challenge in establishing a single, acceptable correlation relationship for individual CEMs. The effect of low-level radioactive material present in the waste is a unique site-specific factor not evaluated in previous tests. The three systems chosen for evaluation were two beta gauge devices and a light scattering device. The performance of the CEMs was evaluated using the requirements in draft Environmental Protection Agency (EPA) Performance Specification 11 (PS11) and Procedure 2. The results of Reference Method 5i stack tests for establishing statistical correlations between the reference method data and the CEMs responses are discussed.