Comparison of vehicle activity and emission inventory between Beijing and Shanghai

Vehicle emission inventory is a critical element for air quality study. This study created systemic methods to establish a vehicle emission inventory in Chinese cities. The methods were used to obtain credible results of vehicle activity in Beijing and Shanghai. On the basis of the vehicle activity data, the International Vehicle Emission model is used to establish vehicle emission inventories. The emissions analysis indicates that 3 t of particulate matter (PM), 199 t of nitrogen oxides (NO(x)), 192 t of volatile organic compounds (VOCs), and 2403 t of carbon monoxide (CO) are emitted from on-road vehicles each day in Beijing, whereas 4 t of PM, 189 t of NO(x), 113 t of VOCs, and 1009 t of CO are emitted in Shanghai. Although common features were found in these two cities (many new passenger cars and a high taxi proportion in the fleet), the emission results are dissimilar because of the different local policy regarding vehicles. The method to quantify vehicle emission on an urban scale can be applied to other Chinese cities. Also, knowing how different policies can lead to diverse emissions is beneficial knowledge for other city governments.     

International trade in meat: the tip of the pork chop

This paper provides an original account of global land, water, and nitrogen use in support of industrialized livestock production and trade, with emphasis on two of the fastest-growing sectors, pork and poultry. Our analysis focuses on trade in feed and animal products, using a new model that calculates the amount of "virtual" nitrogen, water, and land used in production but not embedded in the product. We show how key meat-importing countries, such as Japan, benefit from "virtual" trade in land, water, and nitrogen, and how key meat-exporting countries, such as Brazil, provide these resources without accounting for their true environmental cost. Results show that Japan's pig and chicken meat imports embody the virtual equivalent of 50% of Japan's total arable land, and half of Japan's virtual nitrogen total is lost in the US. Trade links with China are responsible for 15% of the virtual nitrogen left behind in Brazil due to feed and meat exports, and 20% of Brazil's area is used to grow soybean exports. The complexity of trade in meat, feed, water, and nitrogen is illustrated by the dual roles of the US and The Netherlands as both importers and exporters of meat. Mitigation of environmental damage from industrialized livestock production and trade depends on a combination of direct-pricing strategies, regulatory approaches, and use of best management practices. Our analysis indicates that increased water- and nitrogen-use efficiency and land conservation resulting from these measures could significantly reduce resource costs.     

Persistent organic pollutants in 9/11 world trade center rescue workers: reduction following detoxification

Exposure to toxins following the September 11, 2001 attack on and collapse of the World Trade Center (WTC) is of particular concern given the ultra fine particulate dust cloud, high temperature combustion, and months-long fire. Firefighters, paramedics, police and sanitation crews are among the approximately 40000 personnel who labored for weeks and months on rescue and cleanup efforts. Many of the rescue workers have subsequently developed symptoms that remain unresolved with time. This study characterizes body burdens of polychlorinated biphenyls (PCBs), polychlorinated dibenzofurans (PCDFs), and polychlorinated dioxins (PCDDs) in rescue workers and citizens exposed following the WTC collapse. Our research includes a pilot evaluation of a detoxification method aimed at reducing toxic burden. Many congeners were found at elevated levels, in ranges associated with occupational exposures. Post-detoxification testing revealed reductions in these congeners and despite the small study size, some reductions were statistically significant. Health symptoms completely resolved or were satisfactorily improved on completion of treatment. These results argue for a larger treatment study of this method and an overall treatment approach to address toxic burden.     

Risk assessment of trace elements in the stomach contents of Indo-Pacific Humpback Dolphins and Finless Porpoises in Hong Kong waters

The potential health risks due to inorganic substances, mainly metals, was evaluated for the two resident marine mammals in Hong Kong, the Indo-Pacific Humpback Dolphin (Sousa chinensis) and the Finless Porpoise (Neophocaena phocaenoides). The stomachs from the carcasses of twelve stranded dolphins and fifteen stranded porpoises were collected and the contents examined. Concentrations of thirteen trace elements (Ag, As, Cd, Co, Cr, Cs, Cu, Hg, Mn, Ni, Se, V and Zn) were determined by inductively coupled plasma mass spectrometer (ICP-MS). An assessment of risks of adverse effects was undertaken using two toxicity guideline values, namely the Reference Dose (RfD), commonly used in human health risk assessment, and the Toxicity Reference Value (TRV), based on terrestrial mammal data. The levels of trace metals in stomach contents of dolphins and porpoises were found to be similar. Risk quotients (RQ) calculated for the trace elements showed that risks to the dolphins and porpoises were generally low and within safe limits using the values based on the TRV, which are less conservative than those based on the RfD values. Using the RfD-based values the risks associated with arsenic, cadmium, chromium, copper, nickel and mercury were comparatively higher. The highest RQ was associated with arsenic, however, most of the arsenic in marine organisms should be in the non-toxic organic form, and thus the calculated risk is likely to be overestimated.     

Photolytic degradation of triclosan in freshwater and seawater

A 12-days photolysis experiment of triclosan, a widely used bactericide, was performed in freshwater and seawater under a low intensity artificial white light source. Photodegradation of triclosan was observed in both the freshwater and seawater samples. Assuming a first-order reaction, half-lives of triclosan in the freshwater and seawater were approximately 8 and 4 days, respectively. 2,8-Dichlorodibenzo-p-dioxin (DCDD) was detected in both the freshwater and seawater samples after 3 days of irradiation. The photodegradation of triclosan and the production of DCDD suggest that triclosan could be less stable and DCDD might be more stable in seawater than freshwater. As a result, DCDD produced from triclosan survives for a longer time in seawater.     

Can synchronous spawning be predicted from environmental parameters? A case study of the lugworm Arenicola marina

The annual epidemic spawning period of a Scottish population of Arenicola marina (L.) has been recorded over a period of 13 yr. This population spawns between mid-October and mid-November in a discrete spawning event over a period of 4 to 5 d. Endocrine manipulation experiments showed that spawning is induced in females only if sufficient titres of PMH (prostomial maturation hormone) are present in the prostomia. These levels are attained during the 2 to 3 wk prior to the natural spawning date. The East Sands, St. Andrews population always spawns during periods of spring tides regardless of tidal amplitude or whether they are full- or new-moon tides. Meteorological data, including sea-temperature data were collected for each year, and correlation of the environmental data with spawning time was attempted. Correlation of spawning times with weather patterns showed that mean daily air pressures were significantly higher during the spawning period than from September to November as a whole. Evidence also suggests that a reduction in sea temperature is required prior to spawning. A significant moderate negative correlation was found between May to July air temperatures and spawning date, suggesting that higher May to July temperatures may induce early spawning. Daily rainfall and wind speed were also lower during the spawning period, but not significantly so. These results indicate that air pressure (or changes therein) may act as a final spawning cue, and the advantages of this are discussed in relation to fertilization success. A model of the interplay between environmental parameters and the endocrine mechanisms controlling the induction of spawning is proposed. Higher than average summer temperatures may advance gametogenesis to bring the population into a state of maturity (full-size oocytes, well-developed sperm morulae), and may also advance spawning time. Once the population has completed gametogenesis, a drop in sea temperature is then required to trigger an increase in endocrine titres within the prostomium, without which spawning cannot be induced by prostomial injection. The population spawns on spring tides; however a lack of clement weather coinciding with the spring tide will result in population-wide spawning being aborted, as in 1996. Clement weather (high pressure, low rainfall and wind speed) in conjunction with spring tides permits spawning to proceed to completion. Received: 21 June 1999 / Accepted: 25 January 2000     

Assessing local planning capacity to promote environmentally sustainable residential development

Smart growth and sustainability planning have, in recent years, become central issues in planning discourse. Scholars have argued that planning capacity at the local government level is critical for smart growth planning, and that planners have a fundamental role to play in advancing local and regional sustainability. In this paper, we investigate the extent to which local planning capacity enables communities to promote more sustainable, smart growth residential development. Based on a 2013 survey of 38 county and 53 municipal governments in the state of Wisconsin, USA, this study finds that the majority of the sample communities have permitted residential developments characterized as transit-oriented, New Urbanist, mixed use, infill developments, or conservation subdivisions as alternatives to low-density, automobile-dependent conventional developments. The study also finds that jurisdictions with higher planning capacities are more likely to overcome significant barriers to more sustainable residential development.     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.