Utilisation of a coastal grassland by geese after managed re-alignment

In this study we evaluate the effect of coastal re-alignment on the utilisation of coastal grasslands by staging geese. We assessed vegetation change and utilisation by geese using repeated mapping and regular dropping counts in both the restored marsh and adjacent reference sites. All measurements were started well before the actual re-alignment. In addition, we studied the effects of livestock grazing on vegetation and geese, using exclosures. The vegetation transformed from fresh grassland into salt-marsh vegetation. A relatively large proportion of the de-embanked area became covered with secondary pioneer vegetation, and the overall cover of potential food plants for geese declined. Goose utilisation had initially dropped to low levels, both in autumn and in spring, but it recovered to a level comparable to the reference marsh after ten years. Exclosure experiments revealed that livestock grazing prevented the establishment of closed swards of grass in the poorly drained lower area of the restored marsh, and thereby negatively affected goose utilisation of these areas during spring staging. Goose grazing in the restored marsh during spring showed a positive numerical response to grass cover found during the preceding growing season. (1) The value of restored salt marsh as foraging habitat for geese initially decreased after managed re-alignment but recovered after ten years. (2) Our findings support the idea that the value of foraging habitats depends largely on the cover of forage plants and that this can be manipulated by adjusting both grazing and drainage.     

Experimental evidence for the effects of task repetitiveness on mental strain and objective work performance

People frequently have to work in high repetitive jobs. Previous research has focused exclusively on the effects of task repetitiveness on well‐being, while neglecting effects on work performance. In the present study, we aimed to fill this void by conducting two workplace simulations with experimental manipulations of task repetitiveness. Participants worked for about 5 hours at either a computer workstation, compiling computer hardware packages according to customer requests (Experiment 1, N = 160), or at an assembly line, piecing together equipment sets for furniture (Experiment 2, N = 213). Both experiments provide consistent evidence that high repetitiveness has a detrimental effect on well‐being, whereas work performance increases under conditions of high repetitiveness. On a practical level, our study hence shows that high task repetitiveness is a double‐edged sword for both employees and organizations. On a conceptual level, our findings emphasize the necessity to account for both mental strain and work performance when examining the effects of task repetitiveness. Copyright © 2014 John Wiley & Sons, Ltd.     

Photochemistry of halogenated benzene derivatives. part xii.∗ effects of sodium nitrite on the environmental phototransformation of bromoxynil (3,5‐dibromo‐4‐hydroxybenzonitrile) herbicide in water: The photoincorporation of nitrite ions into bromoxynil

Photoreactions of the herbicide bromoxynil (3,5‐dibromo‐4‐hydroxybenzonitrile) (1) were extensively studied in water containing various concentrations of sodium nitrite with radiation of wavelengths around 313 nm. In the absence of NaNO₂, the quantum yields for the photodecomposition of the herbicide I amounted to 0.054±0.005, while such data was in the range of 0.047 ±0.005 to 0.023 ±0.003 in the presence of 0.5 to 25.0 × 10^‐3 m of the inorganic salt. These quantum yield data for the phototransformation of 1 without and with the presence of sodium nitrite followed the Stern‐Volmer equation. The rates of the photolytic destruction of bromoxynil (1) in water were slower in the presence than in the absence of NaNO₂. For example, the irradiation of the 7.8 x 10^‐6M aqueous solution of 1 in the presence of 10 mM sodium nitrite gave rise to the production of three main photoproducts, viz., 3‐bromo‐4‐hydroxy‐5‐nitrobenzonitrile (2), 4‐hydroxy‐3‐nitrobenzonitrile (3), and an “unidentified photoproduct”; 4. In the case of this photoreaction of compound 1, the percentages of maximum concentration of the photoproducts 2, 3, and 4 were achieved after 14, 44.5, and 60‐min photolyses of 1, respectively; the starting material 1 completely disappeared after 60‐min photolysis. The photoproducts 2 and 3 were identified through the interpretation of the GC‐MS data. Both thhe mass and FT‐IR spectra of the product 4 indicated the possible presence of a COOH group in 4.     

The effect of macrophytes on retention times in a constructed wetland for wastewater treatment

Retention times of treated water in a constructed wetland (CW) with horizontal subsurface flow were determined both in the vegetative and non-vegetative periods of 2005. Tracer experiments were performed using fluorescein, an organic compound detectable at extremely low concentrations. Nominal and tracer retention times were determined and compared. Winter tracer retention time (TRT 194 h) and nominal retention time (nHRT 190 h) were nearly exactly equal, while summer TRT (335 h) was approximately twofold higher than nHRT (158 h). Residence time distribution function (RTD) was used to compare retention times obtained for the vegetative and non-vegetative periods. The obtained results document a significant influence of dense common reed vegetation on retention characteristics of the studied system. Common reed can convert a significant volume of water from liquid to gas via evapotranspiration (ET) and thus prolong water retention times in the system. This is very important both technically and ecologically. Longer retention times mean a longer time for microbiological decay of wastewater. Water converted from liquid to gas causes cooling of the microclimate, which is very important, especially in intensively cultivated areas with a lack of water.     

Social chemistry

This article is both an essay to propose social chemistry as a new scientific discipline and a preface of the books Environmental Chemistry for a Sustainable World. Environmental chemistry is a fast emerging discipline aiming at the understanding the fate of pollutants in ecosystems and at designing novel processes that are safe for ecosystems. Past pollution should be cleaned, and future pollution should be predicted and avoided (Lichtfouse et al. 2005a). Such advices are still not applied by humans as demonstrated by the Fukushima nuclear event and global warming. Human errors are repeatable. We therefore suggest a possible solution, which involves bridging chemistry and society by integrating social sciences in chemical research. In particular, citizen discourse analysis should be useful to design chemicals that are both innovative and accepted by society. Then, we present the recent success of environmental chemistry through the foundation of the Association of Chemistry and the Environment; the increase in the impact factor of Environmental Chemistry Letters from 0.814 in 2006 to 2.109 in 2009; and over 35,000 chapter downloads of the book Environmental Chemistry. Lastly, we highlight major topics of the new book series Environmental Chemistry for a Sustainable World (Lichtfouse et al. 2011a, b). The two first volumes are entitled Nanotechnology and Health Risk, and Remediation of Air and Water Pollution.     

Trophic cascade induced by molluscivore predator alters pore-water biogeochemistry via competitive release of prey

Effects of predation may cascade down the food web. By alleviating interspecific competition among prey, predators may promote biodiversity, but the precise mechanisms of how predators alter competition have remained elusive. Here we report on a predator-exclosure experiment carried out in a tropical intertidal ecosystem, providing evidence for a three-level trophic cascade induced by predation by molluscivore Red Knots (Calidris canutus) that affects pore water biogeochemistry. In the exclosures the knots' favorite prey (Dosinia isocardia) became dominant and reduced the individual growth rate in an alternative prey (Loripes lucinalis). Dosinia, a suspension feeder, consumes suspended particulate organic matter (POM), whereas Loripes is a facultative mixotroph, partly living on metabolites produced by sulfur-oxidizing chemoautotrophic bacteria, but also consuming suspended POM. Reduced sulfide concentrations in the exclosures suggest that, without predation on Dosinia, stronger competition for suspended POM forces Loripes to rely on energy produced by endosymbiotic bacteria, thus leading to an enhanced uptake of sulfide from the surrounding pore water. As sulfide is toxic to most organisms, this competition-induced diet shift by Loripes may detoxify the environment, which in turn may facilitate other species. The inference that predators affect the toxicity of their environment via a multi-level trophic cascade is novel, but we believe it may be a general phenomenon in detritus-based ecosystems.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.     

Optimization of mining by application of the equality principle

This paper shows how the equality principle can be applied to traditional mining activities as a theoretical economic basis for “environmentally friendly” waste management of natural resources. A cost structure is proposed to generally improve the exploitation of the natural resources and save energy due to the promotion of corporate economic incentives to a more cost-effective waste management related to these resources. The methodology proposed is based on the cost-benefit analysis concept. It employs the previously introduced equality principle and the model for Efficient Use of Resources for Optimal Production Economy (EUROPE) featuring shadow prices so as to optimize the mining slope and the ore-concentration when utilizing the resources of the rock and provide management with a one digit indicator of the performance of a certain mining activity to get in just once glance an instant comprehension of their mine's overall performance. This approach simultaneously improves the profitability, the technology used and the environment. A case study presents the practical application of the proposed theory on a Swedish copper mine. It is concluded that the presented methodology improves the exploitation of natural resources in mainly technological, economical and environmental terms. The methods that are developed are regarded as being suitable information support tools for decision-making in waste management and optimization of the exploitation of natural resources in the corporate and public context.     

Sustainable recycling model: A comparative analysis between India and Tanzania

Higher economic growth in developing countries has caused higher amounts of wastes. Local government authorities in these countries usually fail to provide adequate services to dispose the increasing amounts of waste, resulting in threats for both the population and environment health. There is therefore an urgent need for recycling as a form of waste management in order to stop the devastating effects of solid waste in developing countries. Using a qualitative method of analysis, this study presents a model to measure and rank the sustainability of recycling programs in India and Tanzania. The model consists of six main constructs including “production, economic, governmental, social, technological, and international factors”. The results showed that India outperforms Tanzania in sustainable recycling programs: per capita waste generated per day in Delhi is higher than in Dar es Salaam; the government of India focuses more on developing recycling plans and techniques as compared to the government of Tanzania where the country is not actively involved in the recycling process; and the solid waste management planning in India is being performed better than Tanzania.     

Quantification of pendimethalin in soil and garlic samples by microwave-assisted solvent extraction and HPLC method

A method for the residual pendimethalin in soil and vegetable samples was developed. The method is based on extraction of pendimethalin from samples using microwave-assisted solvent extraction (MASE) with acetone, ethanol, and water as extraction solvent. Extracted pendimethalin samples were analyzed by high-performance liquid chromatography with ultraviolet detector at 240 nm. The MASE parameters, temperature, heating time, and solvent types were optimized with the feasibility of MASE application in the determination of pendimethalin extraction efficiency of pendimethalin from soil and vegetable samples. The maximum temperature that can be used during the heating for MASE is 60°C, where the recovery percentages reached 97%. Linearity for pendimethalin was found in the range of 2?C20 ??g mL^???1 with limits of detection and limits of quantification of 0.059 and 0.17 ??g mL^???1, respectively.