Effects of customized foot orthoses on manufacturing workers in the metal industry

This 8-week study evaluates the effects of customized foot orthoses on work-related musculoskeletal disorders (WMSDs) of metal industry workers. These WMSDs were evaluated applying the Nordic musculoskeletal questionnaire (NMQ) at three different times (start, 4th week and 8th week) and additional questions were also formulated to obtain information about adaptation, fatigue, comfort and possible improvements. According to the NMQ results, statistical significance was found in the improvements after 4?weeks (p?<?0.05 in two areas, p?<?0.01 in three areas, p?<?0.001 in two areas and no significance in the other two) and after 8?weeks (p?<?0.01 in three areas, p?<?0.001 in four areas and no significance in the other two). The additional questions indicated fatigue reduction (both in general and in lower extremity), comfort level increase (after the adaptation period) and good acceptance, according to workers’ answers, suggesting customized orthoses can be effective in reducing and preventing WMSDs in several body regions.     

Short-term, real-time forecasting of hourly ozone, NO2 and NO levels by means of multiple linear regression modelling

Conclusions  The results are at least as good as those obtained with much more sophisticated models. Furthermore, the models can be easily run on a simple PC. This approach may provide a good diagnostic network (as seen in Bilbao) with real-time, short-term prognostic capabilities for a given location. The models have been built for Bilbao and are applicable only in this location. However, using the same methodology, similar results could be obtained in other environments if a good diagnostic network is available. The full paper is published in the Internet journal ‘Gate to EHS (Environmental and Health Science)’, in June 2001, and can be called up and cited by way of the DOI:http://dx.doi.org/10.1065/ehs2001.06.009     

Net impact of remediation

Following years of progress in designing and executing cleanups of contaminants at waste sites, the U.S. Air Force, state regulatory groups, and others are crafting methods to evaluate broader considerations of risk in remedial decisions. Integrating worker and climate risks into remediation efforts may confer significant benefits, but challenges exist to identifying, assessing, and accounting for them in the remedial process. For sites where future risk posed by contamination far exceeds the risk posed to workers who may be exposed to the contaminants during the remedial process, limiting the range of decision inputs to those presented by the site conditions made sense and provided a net benefit to human health and the environment. There are other sites, however, where future risk posed by the in situ contamination are at levels comparable to the real risks posed to workers, ecology, and even emerging concerns about climate change. For these sites, a net risk reduction cannot be assumed to be a result of remedial action, challenging the remedial community to develop new approaches to ensure positive results. © 2009 Wiley Periodicals, Inc.     

National and regional determinants of tropical deforestation in Colombia

Global tropical deforestation continues to occur at high rates despite political attention. National-level forest baselines are being established all over the world to guide the implementation of several policy mechanisms. However, identifying the direct and indirect drivers of deforestation and understanding the complexity of their interlinkages are often difficult. We first analyzed deforestation between 1990 and 2005 at the national level and found an annual deforestation rate of 0.62 %. Next, we performed separate analyses for four natural regions in Colombia and found annual deforestation rates between 0.42 and 1.92 %. Using general linear models, we identified several direct causes and underlying factors influencing deforestation at the national level: rural population density, cattle, protected areas, and slope. Significant differences in deforestation rates and causes were found across regions. In the Caribbean region, drivers of loss are urban population, unsatisfied basic needs, slope, and precipitation and four land use variables (illicit crops, pastures, cattle, and fires). In the Orinoco region, crops are the main driver of forest loss, and in the Amazonian region, deforestation is primarily due to fires related to the colonization front. Policy mechanisms will have to take into account regional patterns to successfully balance development and forest preservation in Colombia.     

Understanding the processes in a historically relevant thermal and mineral spring water by using mixing and inverse geochemical models

Environmental Geochemistry and Health - The thermal mineral water of Peñón de los Baños spa (Mexico City) has been used for over 500&nbsp;years starting in pre-Hispanic times and...     

Batch and continuous adsorption of Cu(II) and Zn(II) ions from aqueous solution on bi-functionalized sugarcane-based biosorbent

Environmental Science and Pollution Research - A new one-pot synthesis method optimized by a 23 experimental design was developed to prepare a biosorbent, sugarcane bagasse cellulose succinate...     

The As-Contaminated Elqui River Basin: a Long Lasting Perspective (1975–1995) Covering the Initiation and Development of Au–Cu–As Mining in the High Andes of Northern Chile

The Elqui watershed (northern Chile) constitutes a highly contaminated river system, with arsenic exceeding by up to three orders of magnitude the average for river waters. There are three main reasons that explain this contamination: (1) the regional geology and hydrothermal (mineralizing) processes that developed in this realm during Miocene time; (2) the later unroofing–erosion–oxidation–leaching of As–Cu rich sulfide ores, a process that have been taking place for at least 10,000 years; and last but not least (3) mining activities at the high-altitude (>4000 m above sea level) Au–Cu–As El Indio mine, from the late 1970s onwards. The El Indio mineral deposit hosted large veins of massive sulfides, including the important presence of enargite (Cu₃AsS₄). The continuous natural erosion of these veins and their host rocks (also rich in As and Cu) during Holocene time, led to important and widespread metal dispersion along the river system. During the studied pre mining period (1975–1977), the high altitude river Toro waters already showed very large As concentrations (0.36–0.52 mg l⁻¹). The initiation of full scale mining at El Indio (1980 onwards) led to an increase of these values, reaching a concentration of 1.51 mg l⁻¹ As in 1995. During the same year other rivers of the watershed reached peak As concentrations of 0.33 (Turbio) and 0.11 mg l⁻¹ (Elqui). These figures largely exceed the USEPA regulations for drinking water (0.01 mg l⁻¹ As), and about 10% of the total As data from the river Elqui (and 70% from the river Turbio) are above the maximum level allowed by the Chilean law for irrigation water (0.1 mg l⁻¹ As).     

Large-scale modeling of reactive solute transport in fracture zones of granitic bedrocks

Final disposal of high-level radioactive waste in deep repositories located in fractured granite formations is being considered by several countries. The assessment of the safety of such repositories requires using numerical models of groundwater flow, solute transport and chemical processes. These models are being developed from data and knowledge gained from in situ experiments such as the Redox Zone Experiment carried out at the underground laboratory of Äspö in Sweden. This experiment aimed at evaluating the effects of the construction of the access tunnel on the hydrogeological and hydrochemical conditions of a fracture zone intersected by the tunnel. Most chemical species showed dilution trends except for bicarbonate and sulphate which unexpectedly increased with time. Molinero and Samper [Molinero, J. and Samper, J. Groundwater flow and solute transport in fracture zones: an improved model for a large-scale field experiment at Äspö (Sweden). J. Hydraul. Res., 42, Extra Issue, 157–172] presented a two-dimensional water flow and solute transport finite element model which reproduced measured drawdowns and dilution curves of conservative species. Here we extend their model by using a reactive transport which accounts for aqueous complexation, acid–base, redox processes, dissolution–precipitation of calcite, quartz, hematite and pyrite, and cation exchange between Na⁺ and Ca²⁺. The model provides field-scale estimates of cation exchange capacity of the fracture zone and redox potential of groundwater recharge. It serves also to identify the mineral phases controlling the solubility of iron. In addition, the model is useful to test the relevance of several geochemical processes. Model results rule out calcite dissolution as the process causing the increase in bicarbonate concentration and reject the following possible sources of sulphate: (1) pyrite dissolution, (2) leaching of alkaline sulphate-rich waters from a nearby rock landfill and (3) dissolution of iron monosulphides contained in Baltic seafloor sediments. Based on these results, microbially mediated processes are postulated as the most likely hypothesis to explain the measured increase of dissolved bicarbonates and sulphates after tunnel construction.