The use of nondestructive methods to assess a physiological status and conservation perspectives of <Emphasis Type="Italic">Eryngium maritimum</Emphasis> L.

Eryngium maritimum is a perennial species growing exclusively in a coastal littoral zone both on sand dunes and shingle beach and indicated as declining in Northern Europe. The objective of the present study was to prove the use of nondestructive physiological measurement methods to access physiological status of endangered plants, using E. maritimum as a model species. Plants from two Latvian sites were studied in comparison with other populations in Northern Europe (Estonia, Lithuania, Poland, United Kingdom) to find out if local differences in environmental factors affect vitality of E. maritimum individuals. Noninvasive chlorophyll analysis and chlorophyll a fluorescence measurements were used as indicators of plant physiological status through characterization of various aspects of photochemistry of photosystem II activity. Dynamics and morphology of individuals were investigated for evaluation of clonal growth potential of E. maritimum in natural conditions. Highly fluctuating trend of dynamics of individuals (within 40 groups at two Latvian sites) was established for E. maritimum in natural conditions over a five-year period. Disturbance of individuals lead to formation of new shoots from nodal root meristems. An exponential regression between fluorescence parameters F_V/F_M and Performance Index and summary monthly precipitation was found indicating that E. maritimum plants had significant tolerance to water shortage together with susceptibility to increased precipitation. Negative correlation between leaf chlorophyll content and more northern localization of individuals was found (r = 0.95 and r = 0.94, for generative and vegetative shoots, respectively). Northern populations of E. maritimum are endangered by high precipitation in conditions of low air temperature, leading to decrease of photosynthetic productivity and overall physiological status. High developmental plasticity at the root level leads to clonal growth and an efficient survival and relatively long life span of E. maritimum individuals. Chlorophyll a fluorescence is a useful method to search for the effect of suboptimal conditions on physiological status of endangered plant species without elimination and disturbance of individuals.     

An abiotic typology and reference conditions for nutrients and chlorophyll-a in subtropical reservoirs (São Paulo State,Brazil)

Environmental Science and Pollution Research - The establishment of reference conditions and typology are two important steps in water resources management. The reference conditions enable the...     

Constraints to implementation of sustainability indicator systems in five Asian cities

Contemporary studies on sustainability indicator systems (SISs) typically focus on the technical advancement of indicator construction, on qualitative impacts of indicator programmes and on impacts on governance, decision-making and sustainability as a social construct. Yet, their implementation so far has rarely been addressed, even though monitoring and the use of indicator results fall far behind the number of SISs developed. This study aims at the identification of requirements for the development of and constraints to the implementation of SISs in five Asian cities of developing countries. Interviews with local key actors are held, and a qualitative content analysis is carried out. Findings include evidence on the degree of indicator implementation in the case study cities, a hexagonal model for the classification of requirements and constraints, as well as general conclusions for barriers to the use of SISs.     

Applications of Cr-rich composted tannery sludge in the soil decrease microbial biomass and select specific bacterial groups

The tannery industries generate a solid waste known as tannery sludge, which is composed of organic and inorganic compounds, mainly chromium (Cr). When Cr is not removed from the tannery sludge, this solid waste is metal-rich and its application could affect the soil microorganisms. Alternatively, the composting of the tannery sludge can contribute to decreasing the concentration of Cr in the composted tannery sludge (CTS). However, in some cases, the concentration of Cr remains high in the CTS. During the last 10 years, the Cr-rich CTS has been successively applied in the soil, and its effect on soil microbial properties was verified. Here, we discuss the effect of successive applications of Cr-rich CTS on soil microbes. Interestingly, the findings have shown that successive applications of Cr-rich CTS selected specific soil microbial groups with potential functions. In addition, the studies added a new focus to further research evaluating the potential effect of successive applications of Cr-rich CTS on the rare microbial community.

     

Effects of feeding time and organic loading in an anaerobic sequencing batch biofilm reactor (ASBBR) treating diluted whey

An investigation was carried out on the performance of an anaerobic sequencing batch biofilm reactor (ASBBR) treating diluted cheese whey when submitted to different feed strategies and volumetric organic loads (VOL). Polyurethane foam cubes were used as support for biomass immobilization and stirring was provided by helix impellers. The reactor with a working volume of 3 L treated 2 L of wastewater in 8-h cycles at 500 rpm and 30 degrees C. The organic loads applied were 2, 4, 8 and 12 g COD L(-1) d(-1), obtained by increasing the feed concentration. Alkalinity was supplemented at a ratio of 50% NaHCO(3)/COD. For each organic load applied three feed strategies were tested: (a) batch operation with 8-h cycle; (b) 2-h fed-batch operation followed by 6-h batch; and (c) 4-h fed-batch followed by 4-h batch. The 2-h fed-batch operation followed by 6-h batch presented the best results for the organic loads of 2 and 4 g COD L(-1) d(-1), whereas the 4-h fed-batch operation followed by 4-h batch presented results slightly inferior for the same organic loads and the best results at organic loads of 8 and 12 g COD L(-1) d(-1). The concentration of total volatile acids varied with fill time. For the higher fill times maximum concentrations were obtained at the end of the cycle. Moreover, no significant difference was detected in the maximum concentration of total volatile acids for any of the investigated conditions. However, the maximum values of propionic acid tended to decrease with increasing fill time considering the same organic load. Microbiological analyses revealed the presence of Methanosaeta-like structures and methanogenic hydrogenotrophic-like fluorescent bacilli. No Methanosarcina-like structures were observed in the samples.     

Quantifying the contribution of nitrification and denitrification to the nitrous oxide flux using 15N tracers

Microbial transformations of nitrification and denitrification are the main sources of nitrous oxide (N2O) from soils. Relative contributions of both processes to N2O emissions were estimated on an agricultural soil using 15N isotope tracers (15NH4+ or 15NO3-), for a 10-day batch experiment. Under unsaturated and saturated conditions, both processes were significantly involved in N2O production. Under unsaturated conditions, 60% of N-N2O came from nitrification, while denitrification contributed around 85-90% under saturated conditions. Estimated nitrification rates were not significantly different whatever the soil moisture content, whereas the proportion of nitrified N emitted as N2O changed from 0.13 to 2.32%. In coherence with previous studies, we interpreted this high value as resulting from the decrease in O2 availability through the increase in soil moisture content. It thus appears that, under limiting aeration conditions, some values for N2O emissions through nitrification could be underestimated.     

Evaluating Holistic Environmental Consequences of Brownfield Management Options Using Consequential Life Cycle Assessment for Different Perspectives

Brownfields are abandoned, idled, or underused sites whose reuse necessitates some sort of intervention. These sites are largely urban and are frequently contaminated. Brownfield management options can be associated with three types of environmental consequences: those resulting from changes in the site’s environmental quality (primary impacts); those resulting from the actual intervention stage (secondary impacts); and, if the vocation of the site changes, those resulting from effects on regional land use (tertiary impacts). Different stakeholders and decision-making contexts will place a different importance on each of these types of impacts. This article proposes a framework for comparing brownfield management options in regard to these three types of environmental impacts and for interpreting these results from different perspectives. The assessment framework is based on consequential life cycle assessment (LCA), which is shown to provide environmental information on the three types of impacts. The results for a case study are presented, where a “rehabilitation” option allowing residential redevelopment is compared to an “exposure minimization” option not resulting in the site being reused. Calculated primary and tertiary impacts are favorable to the rehabilitation option, whereas secondary impacts are favorable to the exposure minimization option. A ternary diagram presents the favorable option for different stereotypical perspectives. Tertiary impacts are much greater than secondary impacts, and consequently all perspectives that consider tertiary impacts favor rehabilitation. The perspective that considers primary and secondary impacts receives conflicting information. The ternary diagram, showing results for all perspectives, could possibly be useful for consensus-building among stakeholders.     

Photodegradation of Diquat and Paraquat in aqueous solutions by titanium dioxide: evolution of degradation reactions and characterisation of intermediates

The titanium dioxide assisted photodegradation of Diquat and Paraquat herbicides solutions has been the subject of the present investigation, considering its direct application in the treatment of contaminated waters and soils. To have a better understanding of the photodegradation process, different types of TiO2, commercial and 'home prepared' Ti(1-x)FexO2 (x = 0% and 4%), were used as catalysts, using an UV light as radiation source. The degradation reactions were followed by UV spectroscopy and the intermediates and reaction products were characterised by electrospray ionisation mass spectrometry (ESIMS) combined with collision-induced dissociation (CID) and tandem mass spectrometry (MS/MS). The present study shows that, for photocatalytic degradation of Diquat and Paraquat solutions, a basic pH can be determinant, as well as the type of catalyst. The type of catalyst can also strongly influence the degradation pattern of the herbicide. Regarding complete degradation, we were able to show that Diquat is more persistent than Paraquat. During the photocatalytic processes, several intermediate and reaction products are sequentially formed, to which structures are proposed.     

Application and validation of a biotic ligand model for calculating acute toxicity of lead to Moina dubia in lakes of Hanoi,Vietnam

Environmental Science and Pollution Research - It is increasingly being recognized that biotic ligand models (BLMs) can successfully predict the toxicity of divalent metals toward aquatic biota...     

Substitution of urea–formaldehyde by renewable phenolic compound for environmentally appropriate production of particleboards

Environmental Science and Pollution Research - In recent years, research has been conducted in search of alternative adhesives that are less harmful to human health and the environment. Cardanol...