The effects of scale and spatial heterogeneities on diffusion in volcanic breccias and basalts: Amchitka Island, Alaska

Knowledge of the factors that influence the diffusion of contaminants, such as the diffusivity and the connected porosity, is crucial to modeling the long-term fate and transport of contaminants in subsurface systems with small or negligible advective flow, such as in fractured crystalline rock. Fractured rock is naturally heterogeneous, and hence, understanding the diffusivity of a molecule through this material (or the formation factor of the medium) becomes a complex problem, with critical concerns about the scale of laboratory measurements and about the spatial variability of these measurements relative to the scale needed for fate and transport modeling. This study employed both electrical and tracer-based laboratory methods to investigate the effects of scale and pore system connectivity on the diffusivity for volcanic matrix rock derived from the study site, a former underground nuclear test site at Amchitka Island, Alaska. The results of these investigations indicate a relatively well-connected pore system with scale effects generally limited to approximately 6 cm lengths and well-correlated to observed heterogeneous features. An important conclusion resulting from this study, however, is that there is a potential for the estimated diffusivity to be misrepresented by an order of magnitude if multiple samples or longer sample lengths are not used. Given the relatively large number of measurements resulting from these investigations, an analysis of the probability density function (PDF) of the diffusivity was possible. The PDF of the diffusivity was shown to generally follow a normal distribution for individual geologic layers. However, when all of the geologic layers are considered together, the distribution of the subsurface as a whole was shown to follow a lognormal distribution due to the order of magnitude differences amongst the layers. An understanding of these distributions is essential for future stochastic modeling efforts.     

Anticipatory capacity in response to global change across an extreme elevation gradient in the Ica Basin,Peru

Regional Environmental Change - Mountainous areas with extreme elevation gradients and corresponding ranges of biophysical and socioeconomic conditions are highly vulnerable to global change. We...     

At the intersection of disaster risk and religion: interpretations and responses to the threat of Tsho Rolpa glacial lake

Over the last several decades, the scientific community has replaced the ‘acts of god’ explanations for disasters with a view that disasters are actually ‘acts of nature,’ and more recently, ‘acts of human behavior and decision making.’ Despite the secular orientation of contemporary disaster research, religious beliefs still govern people’s interpretations of natural events across many continents and cultures. Using a case study of a rural Sherpa community in Nepal, this paper responds to the challenge of linking religion and disaster risk in the context of a climate change-induced glacial lake outburst flood hazard. Data collection employed ethnographic techniques including participant observation and 53 interviews with community members. Results indicate that the case study community’s religious belief system influences how they interpret and respond to the glacial lake hazard, although their beliefs co-exist with more scientific interpretations of risk. Rather than being immobilised by their belief system, we found that religious aspects like rituals and prayer can enhance social cohesion and contribute to capacities for coping with fear and uncertainty in this community. We assert that religion can yield valuable resources to glacial lake risk reduction strategies, which will benefit from incorporating social-cultural factors more profoundly.     

An evaluation of lead concentrations in imported hot sauces

In the last decade, the U.S. Food and Drug Administration (FDA) has issued several warnings and recalls for food products that exceed FDA standards for lead. Products containing chili peppers and salt were often suspected as sources of lead contamination, and included items such as candy that are routinely investigated. However, products such as hot sauces that contain similar ingredients have not been the focus of evaluations. This study quantified lead concentrations in imported hot sauces, evaluated product compliance to existing United States standards, and calculated potential dietary lead exposure for children using the Integrated Exposure Uptake Biokinetic Model. Finally, recommendations for reducing the risk of lead exposure from hot sauces are provided. Twenty-five (25) bottles of imported hot sauces manufactured in Mexico and South America were purchased in Clark County, Nevada. All hot sauces were analyzed for lead concentrations, pH, and leaded packaging. Hot sauces were analyzed by inductively coupled plasma mass spectrometry and packaging was analyzed using x-ray fluorescence technology. Four brands of hot sauces (16%) exceeded 0.1 ppm lead, the current FDA action level for lead in candy. Hot sauces with lead concentrations >0.1 ppm lead contained salt and were manufactured in Mexico. Subsequent analysis of additional lots of hot sauces exceeding 0.1 ppm lead revealed inconsistent lead concentrations between and within manufacturer lots. The lead concentrations of the plastic hot sauce lids ranged from below the limit of detection to 2,028 ppm lead. There was no association between lead concentrations in hot sauces and pepper type. These results indicate the need for more rigorous screening protocols for products imported from Mexico, the establishment of an applicable standard for hot sauce, and resources to allow for the enforcement of existing food safety policies. The data reported herein represent the first known investigation of lead concentrations in hot sauces.     

Effects of hydromorphology and riparian vegetation on the sediment quality of agricultural low-order streams: consequences for stream restoration

Intensive agricultural land use imposes multiple pressures on streams. More specifically, the loading of streams with nutrient-enriched soil from surrounding crop fields may deteriorate the sediment quality. The current study aimed to find out whether stream restoration may be an effective tool to improve the sediment quality of agricultural headwater streams. We compared nine stream reaches representing different morphological types (forested meandering reaches vs. deforested channelized reaches) regarding sediment structure, sedimentary nutrient and organic matter concentrations, and benthic microbial respiration. Main differences among reach types were found in grain sizes. Meandering reaches featured larger mean grain sizes (50–70 μm) and a thicker oxygenated surface layer (8 cm) than channelized reaches (40 μm, 5 cm). Total phosphorous amounted for up to 1,500 μg?g^?1 DW at retentive channelized reaches and 850–1,050 μg?g^?1 DW at the others. While N-NH₄ accumulated in the sediments (60–180 μg?g^?1 DW), N-NO₃ concentrations were generally low (2–5 μg?g^?1 DW). Benthic respiration was high at all sites (10–20 g O₂ m^?2?day^?1). Our study shows that both hydromorphology and bank vegetation may influence the sediment quality of agricultural streams, though effects are often small and spatially restricted. To increase the efficiency of stream restoration in agricultural landscapes, nutrient and sediment delivery to stream channels need to be minimized by mitigating soil erosion in the catchment.     

Iophenoxic acid derivatives as markers of oral baits to wildlife

The bait-marker iophenoxic acid (IPA) and its derivatives are increasingly used for evaluating and optimizing the cost-effectiveness of baiting campaigns on wildlife, particularly on game species such as the wild boar. We aimed to determine whether concentrations of the three main IPA derivatives ethyl, methyl and propyl-IPA measured on thoracic liquid extracts (TLE) of hunted wild boars may be representative of two exposure doses, 40 and 200 mg, from 20 to 217 days after ingestion. Then we developed a method of detection of the three IPA derivatives by LC/ESI-MS-MS in muscle and liver to evaluate the suitability of these two other tissues for monitoring the marked bait consumption and for measuring available residues in the meat of marked animals. Three semi-captive wild boars received 40 mg of each IPA derivative, three received 200 mg, and three, as controls, did not receive IPA. Blood serum was sampled 20, 197 or 217 days after IPA exposure according to animals and to the derivative. Wild boars were shot by gun after the different times of serum sampling times, and TLE, muscle and liver were sampled. Our results suggest that TLE is not a relevant tissue for quantitatively expressing IPA exposure. Due to interference, no analytical method was validated on TLE containing digestive material. On the other hand, quantifications in the muscle and particularly in the liver could discriminate wild boars that had ingested the two IPA doses from 20 days until 7 months after exposure, especially for the two long term markers ethyl and propyl-IPA. So IPA quantifications in the liver sampled on hunted animals appear to be a reliable tool for monitoring bait consumption in the field at a large scale. Nevertheless, whatever the ingested dose, ethyl- and propyl-IPA concentrations measured in the muscle and the liver of tested animals until 217 days after exposure, remained higher than 0.01 mg/kg, the Maximal Residue Limit (MRL) is recommended for molecules for which no toxicological data are available. Based on the range of IPA residues available in these two tissues, implications for humans consuming marked animals are discussed.     

Effects of riparian forest buffers on in-stream nutrient retention in agricultural catchments

In northeastern Austria, marshlands have been turned into the most productive arable land of the country. As a result, most headwater streams show structurally degraded channels, lacking riparian buffer zones, which are heavily loaded with nutrients from the surrounding crop fields. The present study examines whether longitudinally restricted riparian forest buffers can enhance the in-stream nutrient retention in nutrient-enriched headwater streams. We estimated nutrient uptake from pairwise, short-term addition experiments with NH, NH, PO, and NaCl within reaches with riparian forest buffers (RFB) and degraded reaches (DEG) of the same streams. Riparian forest buffers originated from the conservation of the pristine vegetation or from restoration measures. Hydrologic retention was calculated with the model OTIS-P on the basis of conductivity break-through curves from the salt injections. A significant increase in surface transient storage was revealed in pristine and restored RFB reaches compared with DEG reaches due to the longitudinal step-pool pattern and the frequent occurrence of woody debris on the channel bed. Ammonium uptake lengths were significantly shorter in RFB reaches than in DEG reaches, resulting from the higher hydrologic retention. Uptake velocities did not differ significantly between RFB and DEG reaches, indicating that riparian forest buffers did not affect the biochemical nutrient demand. Uptake of NH was mainly driven by autotrophs. Net PO uptake was not affected by riparian forest buffers. The study shows that the physical and biogeochemical effects of riparian forest buffers on the in-stream nutrient retention are limited in the case of highly eutrophic streams.     

Comparison of real-time instruments and gravimetric method when measuring particulate matter in a residential building

This study used several real-time and filter-based aerosol instruments to measure PM_2.5 levels in a high-rise residential green building in the Northeastern US and compared performance of those instruments. PM_2.5 24-hr average concentrations were determined using a Personal Modular Impactor (PMI) with 2.5 µm cut (SKC Inc., Eighty Four, PA) and a direct reading pDR-1500 (Thermo Scientific, Franklin, MA) as well as its filter. 1-hr average PM_2.5 concentrations were measured in the same apartments with an Aerotrak Optical Particle Counter (OPC) (model 8220, TSI, Inc., Shoreview, MN) and a DustTrak DRX mass monitor (model 8534, TSI, Inc., Shoreview, MN). OPC and DRX measurements were compared with concurrent 1-hr mass concentration from the pDR-1500. The pDR-1500 direct reading showed approximately 40% higher particle mass concentration compared to its own filter (n = 41), and 25% higher PM_2.5 mass concentration compared to the PMI_2.5 filter. The pDR-1500 direct reading and PMI_2.5 in non-smoking homes (self-reported) were not significantly different (n = 10, R² = 0.937), while the difference between measurements for smoking homes was 44% (n = 31, R² = 0.773). Both OPC and DRX data had substantial and significant systematic and proportional biases compared with pDR-1500 readings. However, these methods were highly correlated: R² = 0.936 for OPC versus pDR-1500 reading and R² = 0.863 for DRX versus pDR-1500 reading. The data suggest that accuracy of aerosol mass concentrations from direct-reading instruments in indoor environments depends on the instrument, and that correction factors can be used to reduce biases of these real-time monitors in residential green buildings with similar aerosol properties.

Implications: This study used several real-time and filter-based aerosol instruments to measure PM_2.5 levels in a high-rise residential green building in the northeastern United States and compared performance of those instruments. The data show that while the use of real-time monitors is convenient for measurement of airborne PM at short time scales, the accuracy of those monitors depends on a particular instrument. Bias correction factors identified in this paper could provide guidance for other studies using direct-reading instruments to measure PM concentrations.     

Does social justice knowledge matter? Education for sustainable development and student attitudes

Recent conjecture on the potential primacy of physical environmental components in education for sustainable development (ESD) efforts serves to question the centrality of social justice education as a component of ESD. This research explores a sustainable development student’s basic knowledge of social justice conditions in their country of residence and its relationships to policy attitudes that should be of importance to ESD, including beliefs about the importance of corporate social responsibility, their endorsement of gross national product as an effective measure of progress, their overall assessment of the social fairness of current national social justice policy, and their endorsement of the goals of Occupy Wall Street. Results obtained using path-model hypothesis testing indicate that accuracy of knowledge of US standing on social justice issues is significantly related to these policy attitudes, providing support for social justice content in ESD endeavors to create students empowered for engagement in broader policy goals.