One-at-a-time sensitivity analysis of pollutant loadings to subsurface properties for the assessment of soil and groundwater pollution potential

Chemical leak was numerically simulated for four chemical substances: benzene (light non-aqueous phase liquid (NAPL)), tetrachloroethylene (dense NAPL), phenol (soluble in water), and pentachlorophenol (white crystalline solid) in a hypothetical subsurface leak situation using a multiphase compositional transport model. One metric ton of chemical substances was assumed to leak at a point 3.51 m above the water table in a homogeneous unconfined aquifer which had the depth to water table of 7.135 m, the hydraulic gradient of 0.00097, the recharge rate of 0.7 mm/day, and the permeability of 2.92?×?10^?10 m². For comparison, surface spill scenarios, which had a long pathway from source to the water table, were simulated. Using the model results, point-source pollutant loadings to soil and groundwater were calculated by multiplying mass, impact area, and duration above and below the water table respectively. Their sensitivity to subsurface properties (depth to water table, recharge rate, porosity, organic carbon content, decay rate, hydraulic gradient, capillary pressure, relative permeability, permeability) was analyzed, with changing each parameter within acceptable ranges. The study result showed that the pollutant loading to groundwater was more sensitive to the subsurface properties than the pollutant loading to soil. Decay rate, groundwater depth, hydraulic gradient and porosity were influential to pollutant loadings. The impact of influential parameters on pollutant loadings was nonlinear. The dominant subsurface properties of pollution loadings (e.g., decay rate, groundwater depth, hydraulic gradient, and porosity for groundwater) also affect the vulnerability, and the subsurface pollutant loadings defined in this study are dependent on chemical properties as well, which indicates that the influential hydrogeological and physicochemical parameters to pollutant loadings can be used for pollution potential assessment. The contribution of this work is the suggestion that the sensitivity of pollutant loadings can be used for pollution potential assessment. Soil and groundwater pollution potential of chemicals are discussed altogether for leak scenarios. A physics-based model is used to understand the impact of subsurface properties on the fate and transport of chemicals above and below the water table, and consequently their impact on the pollutant loading to soil and groundwater.

     

Improved dissipation kinetic model to estimate permissible pre-harvest residue levels of pesticides in apples

Prediction of residual concentrations of applied pesticides during the pre-harvest period may be required to ensure the safety of agricultural products. In this study, time-dependent dissipation trends of carbaryl (CB), kresoxim-methyl (KM), flubendiamide (FB), flufenoxuron (FN), bitertanol (BT), and chlorantraniliprole (CN) applied to apples at recommended and threefold greater doses were modeled to estimate pre-harvest residue limit concentrations (C_PHRL) indicating permissible pesticide concentrations during the pre-harvest period. Double-exponential (DE) model results best fit the dissipation trends of all tested pesticides (correlation coefficients of 0.91–0.99) compared to zero-, first-, and second-order models. Among the pesticides examined, CB half-lives in apples of 2.9 and 6.6 days were the shortest, while those of FN (21.1–32.7 days) were the longest. The C_PHRL values for each pesticide in apples were estimated with DE model parameter values and could be used to determine harvest dates for safe apples with pesticide concentrations below their maximum residue limits. Application of the DE model for C_PHRL calculation provides more accurate information for farmers to produce agricultural products safe from pesticide residues.     

Bioaerosol: A Key Vessel between Environment and Health

Airborne transmission of infectious diseases has become a topic of intense debate since the outbreak of COVID-19.This special issue entitled"Bioaerosol,Environm...     

Modelling the long-term consequences of a hypothetical dispersal of radioactivity in an urban area including remediation alternatives

The Urban Remediation Working Group of the International Atomic Energy Agency's EMRAS (Environmental Modelling for Radiation Safety) program was organized to address issues of remediation assessment modelling for urban areas contaminated with dispersed radionuclides. The present paper describes the second of two modelling exercises. This exercise was based on a hypothetical dispersal of radioactivity in an urban area from a radiological dispersal device, with reference surface contamination at selected sites used as the primary input information. Modelling endpoints for the exercise included radionuclide concentrations and external dose rates at specified locations, contributions to the dose rates from individual surfaces, and annual and cumulative external doses to specified reference individuals. Model predictions were performed for a “no action” situation (with no remedial measures) and for selected countermeasures. The exercise provided an opportunity for comparison of three modelling approaches, as well as a comparison of the predicted effectiveness of various countermeasures in terms of their short-term and long-term effects on predicted doses to humans.     

Morphological and chemical composition characteristics of summertime atmospheric particles collected at Tokchok Island,Korea

Determination of the chemical compositions of atmospheric single particles in the Yellow Sea region is critical for evaluating the environmental impact caused by air pollutants emitted from mainland China and the Korean peninsula. After ambient aerosol particles were collected by the Dekati PM10 cascade impactor on July 17–23, 2007 at Tokchok Island (approximately 50 km west of the Korean coast nearby Seoul), Korea, overall 2000 particles (on stage 2 and 3 with cut-off diameters of 2.5–10 μm and 1.0–2.5 μm, respectively) in 10 samples were determined by using low-Z particle electron probe X-ray microanalysis. X-ray spectral and secondary electron image (SEI) data showed that soil-derived and sea-salt particles which had reacted or were mixed with SO₂ and NO_x (or their acidic products) outnumbered the primary and “genuine” ones (59.2% vs. 19.2% in the stage 2 fraction and 41.3% vs. 9.9% in the stage 3 fraction). Moreover, particles containing nitrate in the secondary soil-derived species greatly outnumbered those containing sulfate. Organic particles, mainly consisting of marine biogenic species, were more abundant in the stage 2 fraction than in the stage 3 fraction (11.6% vs. 5.1%). Their relative abundance was greater than the sum of carbon-rich, K-containing, Fe-containing, and fly ash particles, which exhibited low frequencies in all the samples. In addition, many droplets rich in C, N, O, and S were observed. They tended to be small, exhibiting a dark round shape on SEI, and generally included 8–20 at.% C, 0–12 at.% N, 60–80 at.% O, and 4–10 at.% S (sometimes with <3 at.% Mg and Na). They were attributed to be a mixture of carbonaceous matter, H₂SO₄, and NH₄HSO₄/(NH₄)₂SO₄, mostly from the reaction of atmospheric SO₂ with NH₃ under high relative humidity. The analysis of the relationship between the aerosol particle compositions and 72-h backward air-mass trajectories suggests that ambient aerosols at Tokchok Island are strongly affected not only by seawater from the Yellow Sea but also by anthropogenic pollutants emitted from China and the Seoul–Incheon metropolis, resulting in the dominance of complex secondary aerosol particles.     

Constitutive expression of a high-affinity sulfate transporter in Indian mustard affects metal tolerance and accumulation

The Stylosanthes hamata SHST1 gene encodes a high-affinity sulfate transporter located in the plasma membrane. In this study the S. hamata SHST1 gene was constitutively expressed in Indian mustard [Brassica juncea (L.) Czern.] to investigate its importance for tolerance and accumulation of various oxyanions that may be transported by SHST1 and for cadmium, which is detoxified by sulfur-rich compounds. The transgenic SHST1 lines SHST1-12C and SHST1-4C were compared with wild-type Indian mustard for tolerance and accumulation of arsenate, chromate, tungstate, vanadate, and cadmium. As seedlings the SHST1 plants accumulated significantly more Cd and W, and somewhat more Cr and V. The SHST1 seedlings were less tolerant to Cd, Mo, and V compared to wild-type plants. Mature SHST1 plants were less tolerant than wild-type plants to Cd and Cr. SHST1 plants accumulated significantly more Cd, Cr, and W in their roots than wild-type plants. In their shoots they accumulated significantly more Cr and somewhat more V and W. Shoot Cd accumulation was significantly lower than in wild-type, and As levels were somewhat reduced. Compared to wild-type plants, sulfur accumulation was enhanced in roots of SHST1 plants but not in shoots. Together these results suggest that SHST1 can facilitate uptake of other oxyanions in addition to sulfate and that SHST1 mediates uptake in roots rather than root-to-shoot translocation. Since SHST1 overexpression led to enhanced accumulation of Cr, Cd, V, and W, this approach shows some potential for phytoremediation, especially if it could be combined with the expression of a gene that confers enhanced metal translocation or tolerance.     

Assessment of characteristic distribution of PCDD/Fs and BFRs in sludge generated at municipal and industrial wastewater treatment plants

The presence of polychlorinated dibenzo-p-dioxins and furan (PCDD/Fs) and brominated flame retardants (BFRs) in sludge generated at municipal wastewater treatment plants (MWTPs) and industrial wastewater treatment plants (IWTPs) was investigated. The concentrations of these pollutants were in the following ranges: 5.38-7947 ng kg⁻¹ dw (0.02-49.9 ng WHO-TEQ kg⁻¹ dw) for 17 PCDD/Fs, 17.5-66 761 μg kg⁻¹ dw for 27 polybrominated diphenyl ethers (PBDEs), 1.55-29 604 μg kg⁻¹ dw for hexabromocyclododecanes (HBCDs) (α-, β-, and γ-diastereomers), and 4.01-618 μg kg⁻¹ dw for tetrabromobisphenol A (TBBPA). Generally, the levels of each compound in the sewage-sludge samples were higher than those in the industrial-sludge samples with some exceptions. The characteristic distribution profiles of target compounds were observed for different types of sludge and different sources of wastewater. High-chlorinated PCDD/Fs were dominant in all samples except those from the textile industry. The distribution of the BFRs in industrial-sludge samples varied, whereas that of the BFRs in sewage-sludge samples was consistent. The proportion of penta-BDEs in sewage sludge was higher than that in industrial sludge, even though BDE-209 was the most dominant congener in all the samples. For HBCDs, the distribution of diastereomers (α-, β-, and γ-HBCD) was similar across sludge samples that had the same source of wastewater and treatment processes.     

Water Transformation in the Media of Biofilters Controlled by Rhodococcus fascians in Treating an Ethyl Acetate-Contaminated Airstream

Abstract

Biofilters do not provide much water for bacteria to grow. To use them efficiently and properly, it is essential to understand the kinetics of water transformation and to control moisture levels. This study aims to clarify whether the metabolism of microorganisms will improve the water-holding capacity of media or will intensify drying. This experiment was conducted in duplicate, that is, both with and without bacterial inoculation. Both the constant water content mode and the declining water content mode show that microbial growth in a log phase will enhance drying. In contrast, the bacteria growing in a logarithmic decline phase will improve water-holding capacity. Basically, water evaporation can result from the latent heat obtained from microbial respiration or from the physical temperature difference between the unsaturated air and the wet media. Two ways that biofilters can gain water are from water incorporated into bacteria cells and from water obtained from the oxidation of volatile organic compounds (VOCs).     

The association between maternal nonylphenol exposure and parity on neonatal birth weight: A cohort study in Taiwan

Background

The aim of this study was to explore the association between NP exposure and parity and their effect on neonatal birth weight.

Methods

A cohort of pregnant women was established in a medical center in North Taiwan. Urinary NP concentration was determined by high-performance liquid chromatography coupled with fluorescent detection and adjusted using creatinine. A multivariable regression model was fit to determine the association between the maternal NP level in each trimester and neonatal birth weight. The odds ratios (ORs) of infant birth weight below the 10th, 25th, and 50th percentiles, comparing pregnant women with the different NP exposure levels, was estimated using a logistic regression.

Results

Of the 162 pregnant women in the study, 99 were multiparas and 63 were primiparas. After adjusting for other covariates, the NP level in the second trimester had a significant association with birth weight in the primiparas (β = −182.49 g, p value = 0.02). The OR of low infant birth weight, comparing pregnant women with different NP levels, was increased by decreasing the cutoff percentile for birth weight (OR = 1.18 for the 50th percentile, 2.12 for the 25th percentile, and 7.81 for the 10th percentile). The odds of primiparas with high NP level having a low neonatal birth weight increased to 3.87, 11.77, and 9.40 for the three different percentiles (p value < 0.05).

Conclusion

Maternal NP exposure level is associated with an increased risk of low neonatal weight. Primiparas are especially at risk, and the second trimester of pregnancy may be the critical stage of exposure.     

Environmental quality of Korean coasts as determined by modified Shannon–Wiener evenness proportion

The coast of the Korean peninsula experiences a range of human impacts, including pollution, shipping, reclamation, and aquaculture, that have motivated numerous local studies of macrobenthic organisms. In this paper, 1,492 subtidal stations were compiled from 23 studies (areas) to evaluate environmental quality on a broader scale. A common index in biomonitoring, Shannon–Wiener evenness proportion (SEP), could not incorporate azoic or single-species samples. This shortcoming was overcome by developing an inverse function of SEP (ISEP), which was positively correlated with independent measures of water quality available for nine sites and was not biased by the size of the sampling unit. Additionally, at Shihwa Dike, where samples were collected before and after reinstating a tidal connection with the ocean, ISEP values improved over time, as expected. Thus, it is now possible to assign Korean subtidal sites to seven ISEP “grades” and to use their values and trends to guide coastal management.