Gene expression signatures in PCB-exposed Slovak children in relation to their environmental exposures and socio-physical characteristics

Environmental Science and Pollution Research - Our previous gene expression studies in a PCB-exposed cohort of young children in Slovakia revealed that early-life exposures to PCBs and other...     

Source diagnostic and weathering indicators of tar balls utilizing acyclic, polycyclic and S-heterocyclic components

This study represents a forensic chemical analysis to define the liability for the coastal bitumens polluting the beaches of the Mediterranean city of Alexandria. Six tar balls collected from several locations along the coast of the city were analyzed for their acyclic and polycyclic hydrocarbons as well as sulfur heterocycles using GC/FID, GC/AED and gas chromatography/mass spectrometry techniques. The analysis of one Egyptian crude oil is also included as a possible source oil. The tar ball samples were at early stages of weathering. Based on the GC traces and biomarker signatures, the tar balls could be genetically different. One sample collected from the Eastern Harbor region appears to be a Bunker C type fuel produced from Egyptian crudes. The refining process has removed the low molecular weight components. On the other hand, the wide n-alkane distribution together with the absence of an unresolved complex mixture suggests that crude oils probably from tank washings, ballast discharges or accident spills from tankers could have contributed significantly to the other tar ball samples. The distribution of source specific hopane and sterane markers revealed that the tar samples probably originate from different oil fields.     

Microbial degradation of livestock-generated ammonia using biofilters at typical ambient temperatures

The purpose of this research was to neutralize livestock-generated ammonia by using biofilters packed with inexpensive inorganic and organic packing material combined with multicultural microbial load at typical ambient temperatures. Peat and inorganic supporting materials were used as biofiltration matrix packed in a perfusion column through which gas was transfused. Results show the ammonia removal significantly fell in between 99 and 100% when ammonia concentration of 200 ppmv was used at different gas flow rates ranged from 0.030 to 0.060 m3 h(-1) at a fluctuating room temperature of 27.5 +/- 4.5 C (Mean +/- SD). Under these conditions, the emission concentration of ammonia that is liberated after biofiltration is less than 1 ppmv (0.707 mg m(-3)) over the period of our study, suggesting the usage of low-cost biofiltration systems for long-term function is effective at wider ranges of temperature fluctuations. The maximum (100%) ammonia removal efficiency was obtained in this biofilter was having an elimination capacity of 2.217 g m(-3) h(-1). This biofilter had high nitrification efficiencies and hence controlled ammonia levels with the reduced backpressure. The response of this biofilter to shut down and start up operation showed that the biofilm has a superior stability.     

Effects of storage method and duration on the toxicity of marine sediments to embryos of Crassostrea gigas oysters

The objective of laboratory sediment bioassays is to estimate in situ toxicity. This goal is difficult to achieve, as one of the main limitations of sediment toxicity tests is disruption of sediment geochemistry during sampling, handling and preservation. The effects of storage on the estimation of marine sediment toxicity to Crassostrea gigas embryos and larvae were investigated. Three storage methods and four storage periods were compared with three different sediment types contaminated by heavy metals, polycyclic aromatic hydrocarbons (PAHs) and both contaminants. Freezing and freeze-drying considerably increased the toxicity of decanted sediments and their elutriates as compared to the toxicity obtained with fresh sediments. Concerning the elutriates, the toxicity found with frozen and freeze-dried sediments was correlated with DOC, ammonia and PAH contents. However, the toxicity of fresh sediments kept at 4 degrees C increased with increasing duration of storage and was also correlated with the amount of ammonia in the elutriates.     

An analysis of candidates for addition to the Clean Air Act list of hazardous air pollutants

There are 188 air toxics listed as hazardous air pollutants (HAPs) in the Clean Air Act (CAA), based on their potential to adversely impact public health. This paper presents several analyses performed to screen potential candidates for addition to the HAPs list. We analyzed 1086 HAPs and potential HAPs, including chemicals regulated by the state of California or with emissions reported to the Toxics Release Inventory (TRI). HAPs and potential HAPs were ranked by their emissions to air, and by toxicity-weighted (tox-wtd) emissions for cancer and noncancer, using emissions information from the TRI and toxicity information from state and federal agencies. Separate consideration was given for persistent, bioaccumulative toxins (PBTs), reproductive or developmental toxins, and chemicals under evaluation for regulation as toxic air contaminants in California. Forty-four pollutants were identified as candidate HAPs based on three ranking analyses and whether they were a PBT or a reproductive or developmental toxin. Of these, nine qualified in two or three different rankings (ammonia [NH3], copper [Cu], Cu compounds, nitric acid [HNO3], N-methyl-2-pyrrolidone, sulfuric acid [H2SO4], vanadium [V] compounds, zinc [Zn], and Zn compounds). This analysis suggests further evaluation of several pollutants for possible addition to the CAA list of HAPs.     

Flood-risk management strategies for an uncertain future: living with Rhine River floods in The Netherlands?

Social pressure on alluvial plains and deltas is large, both from an economic point of view and from a nature conservation point of view. Gradually, flood risks increase with economic development, because the expected damage increases, and with higher dikes, because the flooding depth increases. Global change, changing social desires, but also changing views, require a revision of flood-risk management strategies for the long term. These should be based on resilience as opposed to the resistence strategy of heightening dikes. Resilience strategies for flood-risk management imply that the river is allowed to temporarily flood large areas, whereas the flood damage is minimized by adapting land use. Such strategies are thus based on risk management and 'living with floods' instead of on hazard control. For The Netherlands, one of the most densely populated deltas in the world, alternative resilience strategies have been elaborated and assessed for their hydraulic functioning and 'sustainability criteria'.     

Degradation of 1,1,2,2-tetrachloroethane and accumulation of vinyl chloride in wetland sediment microcosms and in situ porewater: biogeochemical controls and associations with microbial communities

The biodegradation pathways of 1,1,2,2-tetrachloroethane (TeCA) and 1,1,2-trichloroethane (112TCA) and the associated microbial communities in anaerobic wetland sediments were evaluated using concurrent geochemical and genetic analyses over time in laboratory microcosm experiments. Experimental results were compared to in situ porewater data in the wetland to better understand the factors controlling daughter product distributions in a chlorinated solvent plume discharging to a freshwater tidal wetland at Aberdeen Proving Ground, Maryland. Microcosms constructed with wetland sediment from two sites showed little difference in the initial degradation steps of TeCA, which included simultaneous hydrogenolysis to 112TCA and dichloroelimination to 1,2-dichloroethene (12DCE). The microcosms from the two sites showed a substantial difference, however, in the relative dominance of subsequent dichloroelimination of 112TCA. A greater dominance of 112TCA dichloroelimination in microcosms constructed with sediment that was initially iron-reducing and subsequently simultaneously iron-reducing and methanogenic caused approximately twice as much vinyl chloride (VC) production as microcosms constructed with sediment that was methanogenic only throughout the incubation. The microcosms with higher VC production also showed substantially more rapid VC degradation. Field measurements of redox-sensitive constituents, TeCA, and its anaerobic degradation products along flowpaths in the wetland porewater also showed greater production and degradation of VC with concurrent methanogenesis and iron reduction. Molecular fingerprinting indicated that bacterial species [represented by a peak at a fragment size of 198 base pairs (bp) by MnlI digest] are associated with VC production from 112TCA dichloroelimination, whereas methanogens (190 and 307 bp) from the Methanococcales or Methanobacteriales family are associated with VC production from 12DCE hydrogenolysis. Acetate-utilizing methanogens (acetotrophs) appear to be involved in the biodegradation of VC. The relative abundance of Methanosarcinaceae, the only methanogen group with acetotrophic members, doubled in microcosms in which degradation of VC was observed. In addition, molecular analyses using primers specific for known dehalorespiring bacteria in the Dehalococcoides and Desulfuromonas groups showed the presence of these bacteria in microcosm slurry from the site that showed the highest VC production and degradation. Determination of biogeochemical controls and microbial consortia involved in TeCA degradation is leading to a better understanding of the heterogeneity in biodegradation rates and daughter product distribution in the wetland, improving capabilities for developing remediation and monitoring plans.     

Source characterization of atmospheric heavy metals in industrial/residential areas: a case study in Oman

Total suspended particulate matter (TSP) was collected from two districts: the Sohar industrial estate (SIE) and a residential area in the case study area in Oman. The TSP collected from SIE was taken from 19 different industrial activities, whereas those collected from the residential area were taken from 12 houses. The samples were analyzed for nine heavy metals: chromium (Cr), copper (Cu), manganese (Mn), nickel, lead (Pb), zinc (Zn), cadmium, vanadium, and molybdenum. The results were used to assess the source classes responsible for TSP and heavy metal levels in the atmosphere of the two districts. At each district, principal component analysis was applied to the concentrations of TSP and heavy metals to obtain the number of principal components. At SIE, three groups of elements were determined. The first component contained large factor loadings in Cu and Mn (Cu industrial processes and reinforcement steel production). The second presented most of the variance of Cr, Pb, and Zn (black and galvanized iron pipes production, mechanical industries, and vehicle construction). The third component was composed of Zn and Pb that probably reflected contributions from motor-vehicle tire wear or was associated with municipal incineration. On the other hand, results from the village showed that only one factor was able to explain the main part of the data variance, and the industrial site was polluting air quality in the village with Cu, Cr, Pb, nickel, and Mn.     

Electrochemical decolourisation of structurally different dyes

The electrochemical decolourisation of structurally different dyes (bromophenol blue, indigo, poly R-478, phenol red, methyl orange, fuchsin, methyl green and crystal violet) by means of the application of DC electric current was assessed. It was found that the electrochemical process allowed a colour removal of all dyes studied, although the decolourisation rate largely depended on the chemical structure of the different dyes. Nearly complete decolourisation was achieved for bromophenol blue followed by methyl orange and methyl green, whereas phenol red was hardly decolourised (30% in 60 min). In mixtures of two dyes, the decolourisation rate became similar for both dyes. However, the addition of a redox mediator, (Co(2+/3+)) clearly enhanced the degradation rate of all tested dyes, but the simplest dye molecules were attacked firstly, followed by dyes with more complex chemical structures. The results revealed the suitability of the process to effectively decolourise wastewaters from dyeing process.     

A PCE groundwater plume discharging to a river: influence of the streambed and near-river zone on contaminant distributions

An investigation of a tetrachloroethene (PCE) groundwater plume originating at a dry cleaning facility on a sand aquifer and discharging to a river showed that the near-river zone strongly modified the distribution, concentration, and composition of the plume prior to discharging into the surface water. The plume, streambed concentration, and hydrogeology were extensively characterized using the Waterloo profiler, mini-profiler, conventional and driveable multilevel samplers (MLS), Ground Penetrating Radar (GPR) surveys, streambed temperature mapping (to identify discharge zones), drivepoint piezometers, and soil coring and testing. The plume observed in the shallow streambed deposits was significantly different from what would have been predicted based on the characteristics of the upgradient plume. Spatial and temporal variations in the plume entering the near-river zone contributed to the complex contaminant distribution observed in the streambed where concentrations varied by factors of 100 to 5000 over lateral distances of less than 1 to 3.5 m. Low hydraulic conductivity semi-confining deposits and geological heterogeneities at depth below the streambed controlled the pattern of groundwater discharge through the streambed and influenced where the plume discharged into the river (even causing the plume to spread out over the full width of the streambed at some locations). The most important effect of the near-river zone on the plume was the extensive anaerobic biodegradation that occurred in the top 2.5 m of the streambed, even though essentially no biodegradation of the PCE plume was observed in the upgradient aquifer. Approximately 54% of the area of the plume in the streambed consisted solely of PCE transformation products, primarily cis-1,2-dichloroethene (cDCE) and vinyl chloride (VC). High concentrations in the interstitial water of the streambed did not correspond to high groundwater-discharge zones, but instead occurred in low discharge zones and are likely sorbed or retarded remnants of past high-concentration plume discharges. The high-concentration areas (up to 5529 microg/l of total volatile organics) in the streambed are of ecological concern and represent potential adverse exposure locations for benthic and hyporheic zone aquatic life, but the effect of these exposures on the overall health of the river has yet to be determined. Even if the upgradient source of PCE is remediated and additional PCE is prevented from reaching the streambed, the high-concentration deposits in the streambed will likely take decades to hundreds of years to flush completely clean under natural conditions because these areas have low vertical groundwater flow velocities and high retardation factors. Despite high concentrations of contaminants in the streambed, PCE was detected in the surface water only rarely due to rapid dilution in the river and no cDCE or VC was detected. Neither the sampling of surface water nor the sampling of the groundwater from the aquifer immediately adjacent to the river gave an accurate indication of the high concentrations of PCE biodegradation products present in the streambed. Sampling of the interstitial water of the shallow streambed deposits is necessary to accurately characterize the nature of plumes discharging to rivers.