Distribution of polychlorinated biphenyls in both products and by-products of a mussel shell incinerator facility

Purpose  

Solid waste incineration has recently attracted much attention because the combustion process involved produces highly toxic organohalogen contaminants such as dioxin-like polychlorinated biphenyls (DL-PCBs) present in fly ash. This has raised the need for simple, rapid, accurate methods for monitoring PCBs in ash samples.     

Biofilm formation and microbial activity in a biofilter system in the presence of MTBE, ETBE and TAME

Emerging water contaminants derived from unleaded gasoline such as methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME), are in need of effective bioremediation technologies for restoring water resources. In order to design the conditions of a future groundwater bioremediating biofilter, this work assesses the potential use of Acinetobacter calcoaceticus M10, Rhodococcus ruber E10 and Gordonia amicalis T3 for the removal of MTBE, ETBE and TAME in consortia or as individual strains. Biofilm formation on an inert polyethylene support material was assessed with scanning electron microscopy, and consortia were also analysed with fluorescent in situ hybridisation to examine the relation between the strains. A. calcoaceticus M10 was the best coloniser, followed by G. amicalis T3, however, biofilm formation of pair consortia favoured consortium M10-E10 both in formation and activity. However, degradation batch studies determined that neither consortium exhibited higher degradation than individual strain degradation. The physiological state of the three strains was also determined through flow cytometry using propidium iodide and 3′-dihexylocarbocyanine iodide thus gathering information on their viability and activity with the three oxygenates since previous microbial counts revealed slow growth. Strain E10 was observed to have the highest physiological activity in the presence of MTBE, and strain M10 activity with TAME was only maintained for 24 h, thus we believe that biotransformation of MTBE occurs within the active periods established by the cytometry analyses. Viable cell counts and oxygenate removal were determined in the presence of the metabolites tert-butyl alcohol (TBA) and tert-amyl alcohol (TAA), resulting in TBA biotransformation by M10 and E10, and TAA by M10. Our results show that A. calcoaceticus M10 and the consortium M10-E10 could be adequate inocula in MTBE and TAME bioremediating technologies.     

Identification of new ozonation disinfection byproducts of 17β-estradiol and estrone in water

Estrogens are a class of micro-pollutants found in water at low concentrations (in the ng L⁻¹ range), but often sufficient to exert estrogenic effects due to their high estrogenic potency. Disinfection of waters containing estrogens through oxidative processes has been shown to lead to the formation of disinfection byproducts, which may also be estrogenic. The present work investigates the formation of disinfection byproducts of 17β-estradiol (E2) and estrone (E1) in the treatment of water with ozone. Experiments have been carried out at two different concentrations of the estrogens in ground water (100 ng L⁻¹ and 100 μg L⁻¹) and at varying ozone dosages (0-30 mg L⁻¹). Detection of the estrogens and their disinfection byproducts in the water samples has been performed by means of ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) with a triple quadrupole (QqQ) and a quadrupole-time of flight (QqTOF) instrument. Both E2 and E1 have been found to form two main byproducts, with molecular mass (MM) 288 and 278 in the case of E2, and 286 and 276 in the case of E1, following presumably the same reaction pathways. The E2 byproduct with MM 288 has been identified as 10epsilon-17beta-dihydroxy-1,4-estradieno-3-one (DEO), in agreement with previously published results. The molecular structures and the formation pathways of the other three newly identified byproducts have been suggested. These byproducts have been found to be formed at both high and low concentrations of the estrogens and to be persistent even after application of high ozone dosages.     

Exergy analysis as a tool for the integration of very complex energy systems: The case of carbonation/calcination CO2 systems in existing coal power plants

A common characteristic of carbon capture and storage systems is the important energy consumption associated with the CO₂ capture process. This important drawback can be solved with the analysis, synthesis and optimization of this type of energy systems. The second law of thermodynamics has proved to be an essential tool in power and chemical plant optimization. The exergy analysis method has demonstrated good results in the synthesis of complex systems and efficiency improvements in energy applications.In this paper, a synthesis of pinch analysis and second law analysis is used to show the optimum window design of the integration of a calcium looping cycle into an existing coal power plant for CO₂ capture. Results demonstrate that exergy analysis is an essential aid to reduce energy penalties in CO₂ capture energy systems. In particular, for the case of carbonation/calcination CO₂ systems integrated in existing coal power plants, almost 40% of the additional exergy consumption is available in the form of heat. Accordingly, the efficiency of the capture cycle depends strongly on the possibility of using this heat to produce extra steam (live, reheat and medium pressure) to generate extra power at steam turbine. The synthesis of pinch and second law analysis could reduce the additional coal consumption due to CO₂ capture 2.5 times, from 217 to 85 MW.     

Modeling the formation and fate of odorous substances in collection systems.

A conceptual model that simulates the formation and fate of odorous substances in branched collection systems is presented. The model predicts the activity of the relevant biomass phenotypes under aerobic, anoxic, and anaerobic conditions in force mains and gravity sewers. The formation and fate of individual, malodorous substances in the bulk water, biofilms, and sediments are modeled. The release of odorous compounds from the bulk water to the sewer gas phase, their fate in the gas phase, and their subsequent release into the urban atmosphere is simulated. Examples of model application include the prediction of hydrogen sulfide and malodorous fermentation products from force mains and gravity sewers.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

Relations between PM10 composition and cell toxicity: a multivariate and graphical approach

Previous studies have used particle mass and size as metrics to link airborne particles with deleterious health effects. Recent evidence suggests that particle composition can play an important role in PM-toxicity; however, little is known about the specific participation of components (individually or acting in groups) present in such a complex mixture that accounts for toxicity. This work explores relationships among PM(10) components in order to identify their covariant structure and how they vary in three sites in Mexico City. Relationships between PM(10) with cell toxicity and geographical location were also explored. PM(10) was analyzed for elemental composition, organic and elemental carbon, endotoxins and the induction of inhibition of cell proliferation, IL-6, TNFalpha and p53. PM(10) variables were evaluated with principal component analysis and one-way ANOVA. The inhibition of cell proliferation, IL-6 and TNFalpha were evaluated with factorial ANOVA and p53 with the Welch test. The results indicate that there is heterogeneity in particle mass, composition and toxicity in samples collected at different sites. Multivariate analysis identified three major groups: (1) S/K/Ca/Ti/Mn/Fe/Zn/Pb; (2) Cl/Cr/Ni/Cu; and (3) endotoxins, organic and elemental carbon. Groups 1 and 3 showed significant differences among sites. Factorial ANOVA modeling indicated that cell proliferation was affected by PM concentration; TNFalpha and IL-6 by the interaction of concentration and site, and p53 was different by site. Radial plots suggest the existence of complex interactions between components, resulting in characteristic patterns of toxicity by site. We conclude that interactions of PM(10) components determine specific cellular outcomes.     

Rapid molecular prenatal diagnosis of ataxia-telangiectasia by direct mutational analysis

Mutations of the ataxia-telangiectasia-mutated (ATM) gene are responsible for the autosomal recessive disorder ataxia-telangiectasia (A-T). This study reports the first A-T prenatal diagnosis performed in Spain by direct molecular analysis. The pregnant woman had a previous child suffering from A-T due to a deletion in the ATM gene. The ATM coding region was sequenced in the A-T patient and her parents. Then, a specific polymerase chain reaction (PCR) to detect the deletion was performed for prenatal diagnosis. Additionally, polymorphic HLA loci were examined in order to exclude the possible contamination by maternal DNA. In this family of Gypsy origin, we carried out a rapid molecular diagnosis of A-T. Then, a prenatal diagnosis was carried out, identifying the deletion in the fetal DNA. Additionally, we performed a population study in unrelated Spanish Gypsies and in unrelated controls, showing that the deletion described could be a hotspot in the Spanish Gypsy population. The size of the coding region and the genomic structure, together with the absence of hotspots, make the mutation screening of the ATM gene difficult. The ability to identify ATM mutations provides a tool that can be applied in confirmatory diagnosis, genetic counselling, carrier prediction and prenatal diagnosis. Copyright © 2007 John Wiley & Sons, Ltd.     

Method for determination of methane potentials of solid organic waste

A laboratory procedure is described for measuring methane potentials of organic solid waste. Triplicate reactors with 10 grams of volatile solids were incubated at 55 degrees C with 400 ml of inoculum from a thermophilic biogas plant and the methane production was followed over a 50-day period by regular measurements of methane on a gas chromatograph. The procedure involves blanks as well as cellulose controls. Methane potentials have been measured for source-separated organic household waste and for individual waste materials. The procedure has been evaluated regarding practicality, workload, detection limit, repeatability and reproducibility as well as quality control procedures. For the source-separated organic household waste a methane potential of 495 ml CH4/g VS was found. For fat and oil a lag-phase of several days was seen. The protein sample was clearly inhibited and the maximal methane potential was therefore not achieved. For paper bags, starch and glucose 63, 84 and 94% of the theoretical methane potential was achieved respectively. A detection limit of 72.5 ml CH4/g VS was calculated from the results. This is acceptable, since the methane potential of the tested waste materials was in the range of 200-500 ml CH4/g VS. The determination of methane potentials is a biological method subject to relatively large variation due to the use of non-standardized inoculum and waste heterogeneity. Therefore, procedures for addressing repeatability and reproducibility are suggested.