地方环境约束目标对经济增长的影响效应

从2003~2017年中国283个地级市的政府工作报告中,收集了各年度各城市的环境保护约束目标,考察了各类环境约束目标对经济增长的影响.研究发现,对于SO₂等工业污染物的直接约束能够在促使政府提升环境治理力度的同时,释放经济增长红利;关于空气质量优良天数和PM_2.5浓度的间接约束不足以刺激污染型企业转型,且导致经济增长速度放缓.无环境约束将产生正向经济增长效应,但会以环境污染为代价.中间机制检验结果显示,产业结构和环境治理是环境约束影响经济增长的主要传导渠道.在环境保护约束的特征方面,约束目标“加码”将抑制经济增长,设定污染物减排区间更有利于发挥经济增长效应.经济与环境协调度方面,对环境污染物设定约束目标有助于促进经济与环境协调发展,无约束则不利于经济增长和环境保护双重目标的实现.地方政府应在明确设定污染物排放目标的基础上,遵循渐进原则对环境保护约束目标进行调整.     

广东省沿岸海域藻华发生的时空特征

本文收集了1980—2017年广东省沿岸藻华发生数据,并进行了系统分析,结果表明藻华发生区域主要集中于珠江口附近、大鹏湾和大亚湾水域,具有明显的时空特征。不同区域的藻华种类差异明显,广东西部多发硅藻藻华,广东中部多发甲藻藻华,广东东部多发金藻藻华。且各地区主要藻华种类的发生也呈现出不同的年际和季节差异,广东沿岸中部地区每年几乎都有藻华出现,其中大鹏湾海域在2000年以后无硅藻藻华发生,大亚湾海域在2002年之前以硅藻藻华为主,2002年以后以甲藻藻华为主;而东部和西部在2000年以前几乎无藻华发生,直到2000年以后才开始频繁出现藻华。西部地区（湛江海域）夏季多发硅藻藻华,中部地区的珠江口春季多发有毒藻华,大鹏湾春季多发夜光藻（Noctiluca scintillans）藻华,大亚湾夏秋季节多发锥状斯氏藻（Scrippsiella trochoidea）藻华,广东东部的球形棕囊藻（Phaeocystis globosa）藻华可在全年出现。综上,广东省藻华原因种类分布具有明显的地域和季节特征,因此需要对不同地区的藻华发生情况和可能诱因进行有针对性的监测和研究,采取区域化的管理,以期能够更合理高效地利用和保护广东省的海洋资源。     

Can a low-carbon development path achieve win-win development: evidence from China’s low-carbon pilot policy

Mitigation and Adaptation Strategies for Global Change - Low-carbon pilot (LCP) policy aims to not only achieve economic development but also address climate change problems in China. With a...     

Heterogeneity in the relationship between carbon emission performance and urbanization: evidence from China

Mitigation and Adaptation Strategies for Global Change - Global change caused by carbon emissions alone has become a common challenge for all countries. However, current debates about urbanization...     

Evaluating national hydrogen refueling infrastructure requirement and economic competitiveness of fuel cell electric long-haul trucks

This study explored the national hydrogen refueling infrastructure requirement along major United States (US) interstate highway corridors to support the deployment of fuel cell electric trucks (FCETs) for the national long-haul trucking fleet. Given the long-haul trucking shipment demand in 2025 projected by the Freight Analysis Framework, locations and capacities of hydrogen stations were identified for inter-zone freight flows, and the total daily refueling demand was estimated for intra-zone flows for each FAF zone. Based on the infrastructure deployment results, we conducted an economic feasibility analysis of FCETs by evaluating the total ownership cost. We found that when the FCET penetration is relatively high (e.g., 10% penetration), FCETs become more competitive in terms of fuel cost and idling cost and could be economic viable if the incremental vehicle cost is reduced to meet the near-term FCET technology cost targets and the liquefaction cost is reduced to an optimal case. We also observed that the station cost depends on regional factors, particularly regional demand, which is used to determine station capacity. Thus, one possible strategy for station roll-out is to have early investment in target regions where station costs are expected to be relatively low such as the Pacific and West South Central regions.

     

专家笔谈：资源环境热点问题

重大的资源开发利用工程建设设想或实施往往容易引起社会各界的广泛关注。如何正确认识和科学评价各种资源环境热点问题是大家讨论的重点。文章认为任何重大资源开发工程必须遵循自然规律、生态规律、资源规律和经济规律,必须结合国家战略需求和地缘政治关系,开展前期深入的系统性综合调查,进行生态安全与资源工程安全评价和交叉学科论证,并对其科学价值、社会价值和经济价值等做出正确的判断。建议：未来的资源环境工程建设要谨防“大跃进”,要科学认识自然资源系统规律,守护好美丽的地球家园;要切实履行资源科学家的社会责任,提倡基于科学研究和科学态度的学术争鸣,科学问题最好还是由科学家去讨论;一些争议大的科研课题慎用公益性研发经费来支持。     

新型Fe3O4@α-MnO2活化过一硫酸盐降解水中偶氮染料

采用两步水热法制备了新型磁性纳米Fe₃O₄@α-MnO₂复合材料作为催化剂,用于活化过一硫酸盐（PMS）产生强氧化性的硫酸根自由基（SO₄^-·）氧化降解偶氮染料活性黑5（RBK5）.采用透射电子显微镜（TEM）,X射线粉末衍射仪（XRD）和振动样品磁强计（VSM）对制备的催化剂进行表征,证明成功合成了纳米α-MnO₂包覆Fe₃O₄形态的Fe₃O₄@α-MnO₂催化剂,催化剂的饱和磁化强度为39.89emu/g.Fe₃O₄@α-MnO₂催化剂活化PMS与单一的Fe₃O₄和α-MnO₂活化PMS相比,具有更高的催化效率,说明铁锰双金属存在协同作用.同时研究了催化剂的投加量、PMS的浓度和初始pH值等各种因素对RBK5的降解效率以及反应动力学的影响.实验结果表明,Fe₃O₄@α-MnO₂催化剂活化PMS降解RBK5的过程符合准一级反应动力学,在催化剂投加量为1.2g/L,PMS的浓度为4mmol/L,初始pH值为7.0,反应时间为60min的情况下,浓度为30mg/L的RBK5的降解效率可达到91%,此时RBK5的降解速率常数也达到最高值0.023min^-1.此外,通过加入自由基淬灭剂甲醇、叔丁醇和硝基苯判断了Fe₃O₄@α-MnO₂/PMS体系中起主要氧化降解作用的活性物种为SO₄^-·.     

生物基聚合物PHBV和PLA复合材料在不同介质中的生物降解及其影响因素

传统工艺的塑料生产不仅依赖石油资源的持续开发利用,同时给环境造成了前所未有的压力,近年来生物基聚合物（聚（3-羟基-3-戊酸酯）-PHBV,聚乳酸-PLA）日渐成为传统石油基塑料的替代产品.本文采用呼吸测试手段,旨在揭示均质复合材料在不同环境介质（土壤、熟化堆肥、水体）条件下及有机添加剂（木质素）,无机添加剂（蒙脱石）和天然有机物链增长剂（Joncryl）作用下的生物降解特征.结果表明：当链增长剂Joncryl添加量为5%时,对所有介质PHBV和PLA复合材料产生显著抑制作用.Joncryl添加量为0.2%时,未对所测样品的生物降解行为产生干扰作用.在熟化堆肥介质中,PLA复合材料比PHBV基质混合物的生物降解速率明显降低.有机木质纤维添加剂（榛子壳粉末）单独在聚合物中添加或者和链增长剂Joncryl以及非有机添加剂（Dellite72T）共同作用下都可促进PLA聚合物中各组分的相容连接性.实验结果表明,新型添加剂在不同介质中以二元或三元添加的方式对生物降解过程产生重要影响,该研究将为新型材料使用后的生物降解效应提供理论依据.     

Effect of TiO2 nanoparticle aggregation on marine microalgae Isochrysis galbana

TiO_2 nanoparticles(NPs) could adversely impact aquatic ecosystems. However, the aggregation of these NPs could attenuate this effect. In this work, the biological effects of TiO_2 NPs on a marine microalgae Isochrysis galbana were investigated. The aggregation kinetics of TiO_2 NPs under different conditions was also investigated to determine and understand these effects. Results showed that, though TiO_2 NPs had no obvious impact on the size and reproducibility of algal cells under testing conditions, they caused a negative effect on algal chlorophyll, which led to a reduction in photosynthesis. Furthermore, fast aggregation of TiO_2 NPs occurred under all conditions, especially at the pH close to the p Hzpc. Increasing ionic strength and NP concentration also enhanced the aggregation rate.The aggregation and the following sedimentation of TiO_2 NPs reduced their adverse effects on I. galbana.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.