天津市滨海新区PM_(2.5)污染时空分布及影响因素研究

为了降低天津市滨海新区中PM_(2.5)的污染,需要对天津市滨海新区PM_(2.5)污染的时空分布和影响因素进行研究。研究天津市滨海新区近年来PM_(2.5)的时空分布特征,并选取PM_(2.5)的相关指标,对天津市滨海新区PM_(2.5)污染影响因素进行分析。结果表明,在天津市滨海新区的冬季时,PM_(2.5)的质量浓度值最高,在滨海新区的夏季时,PM_(2.5)的质量浓度值最低。PM_(2.5)在天津市滨海新区昼间大气中的质量浓度低于夜间大气中的质量浓度。     

使用热处理污泥吸附剂去除废水中重金属铜的研究

基于重金属铜的高度危害性和污泥的高效重复利用的考虑,研究了在污泥吸附剂上去除合成废水中重金属铜的实例。将污泥干燥,研磨并在各种温度下进行热处理,使用SEM和FTIR技术分析了污泥的表面形貌和化学结构。实验所研究的参数是铜离子的初始浓度、反应时间、污泥用量以及污泥的热处理温度。实验数据显示随着污泥用量的增加,Cu+2的去除率增加,并根据使用的浓度范围,研究了Cu+2的初始浓度对重金属铜去除率的影响。对实验数据使用不同等温线进行模拟,获得线性拟合性能较好的等温模型。     

环境污染防治在建筑工程管理施工中的作用分析与研究

建筑活动是破坏环境资源、污染环境的主要活动之一,如何有效达到施工环境污染防治的目标已经逐渐成为社会关注的焦点话题。为有效防治施工环境污染,文中首先对典型施工环境污染的主要来源进行分析,然后提出施工环境污染防治目标的动态控制流程,并从设置动态控制目标、重视主动控制、多方面釆取有效措施方面对目标的动态控制进行分析。通过对施工环境目标的动态控制分析,使动态控制原理在项目环境管理领域有效运用,降低了建筑施工对环境的污染。     

等离子体处理的时效性对芳Ⅲ/双马复合材料耐湿热性能的影响

目的考察等离子体处理前后及其时效性对芳Ⅲ/双马复合材料弯曲强度、界面性能及耐湿热性能的影响。方法用低温射频耦合等离子体处理芳纶纤维表面,分别将未处理的、等离子体刚处理过的和等离子体处理后在空气中放置三天后的纤维通过溶液预浸渍工艺制备芳Ⅲ/双马复合材料预浸料,再经过高温模压成形技术制备芳Ⅲ/双马复合材料单向板。采用万能材料试验机对水煮前后复合材料的弯曲强度和层间剪切强度进行测试,利用扫描电子显微镜对复合材料层间剪切破坏形貌进行观察。结果等离子体处理后,复合材料的吸水率由未处理时的0.51%下降到0.33%,复合材料层间剪切强度由49.4 MPa提高到62.9 MPa。等离子体处理时效后复合材料的吸水率增加到0.69%,复合材料的层间剪切强度下降到56.0 MPa。结论等离子体处理提高了复合材料界面性能,但等离子体处理的时效后,复合材料的界面性能及其耐湿热性能有所下降。等离子体处理及时效性对复合材料的弯曲强度和耐湿热性能变化不大。     

阳极溶出伏安法、石墨炉原子吸收法测定海水中总铬的方法比较研究

铬是海洋水体中的痕量重金属之一,海水的高盐基体对铬的测定有严重的干扰,而且海水中同时存在Cr(Ⅲ)和Cr(Ⅵ),两种不同价态给测定也带来了一定难度。文章从Cr(Ⅲ)的氧化率、方法检出限、精密度、实际样品加标等方面对过氧化氢氧化-阳极溶出伏安法与传统的MIBK萃取-无火焰原子吸收分光光度法进行了比较研究,发现两种方法在测试结果上无显著差异,但是过氧化氢氧化-阳极溶出伏安法具有更高的精密度,更低的检出限,且对Cr(Ⅲ)的回收率略有提升。     

关于高校绿色教育环境下中华传统体育文化探讨

针对高校绿色教育环境下中华传统体育文化的探讨问题,给出了高校绿色教育的基本理论,包括高校绿色教育的概念,高校绿色教育的特点,包括高校绿色教育的生命性、高校绿色教育的生活性、高校绿色教育的人文性和高校绿色教育的内容与实践,探讨了高校绿色教育环境与中华传统体育文化的发展,包括高校绿色教育环境与中华传统体育文化的价值、高校绿色教育环境与中华传统体育文化的发展,最后,对高校绿色教育环境与中华传统体育文化的互动进行了说明。     

Population structure and sex-change in the coral-inhabiting snailCoralliophila violacea at Hsiao-Liuchiu,Taiwan

Surveys of the coral-inhabiting snailCoralliophila violacea (Lamarck) (=C. neritoidea Kiener) were made on shallow fringing reefs (<8 m deep) around Hsiao-Liuchiu, Taiwan, between July and October 1990. The snails were aggregated into patches on the surface of massive poritid coral colonies. Coral colonies >40 cm in diameter were more likely to bear patches of snails than smaller colonies, and also to have more snails. The coralliophilids ranged from 5 to 30 mm in aperture length. The sex ratio of the population was biased toward males (539:279), with only a few small individuals of indistinguishable sex. Snails between 6 and 10 mm were all males, while most snails with aperture lengths 20 mm were females. Judging from the distinct size ranges of males and females within patches and from the observed degeneration of the penis, the snails may have changed sex from male to female with increasing size. Sex-change may occur across a wide size range (10 to 20 mm). The correlation of smallest female size and largest male size among patches indicates that snail size at sex-change is peculiar to each individual patch. Those females in patches with a single female (but many males) were significantly smaller than females in multiple-female patches. It is likely that in the absence of females males change sex at a smaller size, whereas in the presence of large females males delay sexchange until they have reached a larger size. The plasticity of size at sex-change may be adaptive and a result of natural selection at the individual level.     

8-氨基喹啉-5-偶氮-对苯酚荧光光度法测定微量铬(Ⅵ)

在盐酸介质中,铬(Ⅵ)与AQAPOH形成可被氯仿萃取的荧光化合物,其λex/λem=295nm/400nm.线性范围为0-1.0μg Cr(Ⅵ)/25ml(水相),检测限为0.7μg/L.除Mn(Ⅶ)外,常见金属离子无干扰,可在数千倍Cr(Ⅲ)存在下测定废水中微量铬(Ⅵ).初步探讨了荧光反应的机理.     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

离子交换树脂光度法测定微量铁的研究

研究了以阳离子交换树脂为显色载体，利用直接吸附在树脂上有色络合物－Fe(II)邻二氮菲的吸光度，借以检测水和火腿肠中铁的新方法，本法具有比原子吸收法更高的灵敏度，稳定性和选择性，并对成络及树脂吸附条件作了较详细研究。